Sunlite 50703-SU 1-gang dekorativ stålafbryder og stikkontaktplade brugermanual

1. Introduktion

This manual provides essential instructions for the safe installation, proper care, and maintenance of your Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate. Designed for durability and aesthetic appeal, this wall plate is intended to cover a single Decora-style switch or receptacle.

2. Sikkerhedsoplysninger

• Elektrisk fare: Always turn off power at the circuit breaker or fuse box before attempting any electrical installation or maintenance. Failure to do so can result in serious injury or death.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret elektriker.
• Dette produkt er kun designet til indendørs brug.
• Brug ikke dette produkt, hvis det ser ud til at være beskadiget.

3. Pakkens indhold

• One (1) Sunlite 50703-SU 1-Gang Decorative Steel Switch and Receptacle Plate
• Two (2) Color-Matched Mounting Screws

4. Opsætning og installation

Follow these steps to safely install your new wall plate:

1. Sluk for strømmen: Locate the circuit breaker or fuse box that controls the power to the switch or receptacle you are working on. Turn off the power completely. Verify that the power is off using a voltage tester.
2. Fjern gammel vægplade: Carefully unscrew and remove the existing wall plate.
3. Position New Wall Plate: Align the Sunlite 50703-SU decorative wall plate over the switch or receptacle opening. Ensure the plate is level.
4. Sikker vægplade: Use the two included color-matched screws to fasten the wall plate to the electrical box. Do not overtighten the screws, as this can damage the plate or the electrical box.
5. Gendan strøm: Once the wall plate is securely installed, restore power at the circuit breaker or fuse box.

Front view of the Sunlite 50703-SU 1-Gang Decorative Steel Wall Plate, showcasing its brushed steel finish and single opening for a Decora-style switch or receptacle.

Informational graphic detailing the Sunlite 1-Gang Decorative Steel Wall Plate. It highlights key features such as 1-Gang cover plate, durable steel construction, easy installation, and UL listing, along with its dimensions of 4.6 inches high and 2.8 inches wide.

5. Betjening

Once installed, the Sunlite 50703-SU wall plate serves as a protective and decorative cover for your electrical switch or receptacle. No operational steps are required for the wall plate itself.

6. Vedligeholdelse og pleje

• To clean the wall plate, use a soft, damp klæde.
• Undgå at bruge slibende rengøringsmidler, skrappe kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• Regular cleaning will help maintain the plate's appearance and prevent dust accumulation.

7. Fejlfinding

• Pladen passer ikke: Ensure that the electrical box is a standard 1-gang size and that the switch or receptacle is Decora-style.
• Skruer flugter ikke: Check the alignment of the electrical box and the device (switch/receptacle). Adjust if necessary. Do not force screws.
• Ridser eller skader: If the plate is scratched or damaged during installation, it may need to be replaced.

8. Specifikationer

9. Garantioplysninger

For detailed warranty information regarding your Sunlite 50703-SU Decorative Steel Switch and Receptacle Plate, please refer to the product packaging or contact Sunlite customer service.

10. Support

For further assistance, product inquiries, or to explore other Sunlite products, please visit the official Sunlite store:

Visit the Sunlite Store on Amazon