Indledning
The Fantech ECO-Touch is a sophisticated touchscreen multi-function controller designed to manage your Fresh Air Appliance. It provides flexible operation modes to meet individual ventilation needs, optimizing performance based on environmental factors such as indoor relative humidity and outdoor temperature. This manual provides essential information for the proper installation, operation, and maintenance of your ECO-Touch controller.
Sikkerhedsoplysninger
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death. Always disconnect power to the Fresh Air Appliance before installing or servicing the control. Installation should be performed by a qualified technician in accordance with all local and national electrical codes.
- Sørg for, at strømmen er afbrudt før installation eller vedligeholdelse.
- Do not operate the control with wet hands.
- Keep the control away from water and excessive humidity.
- Do not attempt to repair or modify the control yourself. Refer to qualified service personnel.
Produkt overview
The Fantech ECO-Touch controller features a clear touchscreen display for intuitive interaction. Below is an illustration of the control panel and its key indicators.
Figur 1: Fantech Eco-Touch Electronic Programmable Wall Control. This image displays the white rectangular control unit with a blue backlit touchscreen. The screen shows various icons and text: a house with an arrow and fan indicating air movement, "FILTER/FILTRE", "RECIRC", "AUTO", "ECO" mode with a leaf icon, "MANUAL" mode with "SPEED" and "MAX" options, and "OPTIONS" with sun (brightness) and water drop (humidity) icons, displaying "42 % IN" for indoor relative humidity.
Vigtige displayelementer inkluderer:
- Ventilation Indicator: A house icon with an arrow and fan, showing air movement.
- Filter/Filtre Indicator: Alerts when the air filter needs cleaning or replacement.
- RECIRC Mode: Indicates recirculation of indoor air.
- AUTO-tilstand: Enables automatic operation, including ECO mode.
- ØKO -tilstand: Optimizes appliance performance based on indoor relative humidity and outdoor temperature.
- MANUEL tilstand: Allows manual control over fan speed (SPEED) and maximum operation (MAX).
- Valgmuligheder: Icons for brightness (sun) and humidity (water drop), with a digital display for indoor relative humidity percentage.
Opsætning og installation
The ECO-Touch controller is designed for wall mounting and requires a 4-wire connection to your Fresh Air Appliance. Due to the electrical nature of the installation, it is highly recommended that a certified electrician or qualified HVAC technician performs the setup to ensure compliance with all local electrical codes and safety standards.
Tjekliste før installation:
- Verify compatibility with your Fantech Fresh Air Appliance model.
- Ensure power to the appliance is completely disconnected at the circuit breaker.
- Gather necessary tools (screwdriver, wire strippers, etc.).
Ledningsinstruktioner:
Connect the four wires from the Fresh Air Appliance to the corresponding terminals on the ECO-Touch controller. Refer to the wiring diagram provided with your Fresh Air Appliance for specific terminal assignments. Ensure all connections are secure and properly insulated.
Montering:
Mount the controller on an interior wall in a central location, away from direct sunlight, drafts, or heat sources that could affect humidity readings. Use the provided mounting screws to secure the control to the wall box.
Operating the ECO-Touch Control
The ECO-Touch features a user-friendly touchscreen interface. Tap the desired mode or option to activate it.
ECO Mode (Automatic Operation):
Tap the "ECO" button under the "AUTO" section to enable automatic operation. In this mode, the Fresh Air Appliance will automatically adjust its operation based on the indoor relative humidity (RH) and the outdoor temperature to optimize ventilation and energy efficiency. This mode is ideal for continuous, hands-off operation.
Manuel tilstand:
Tap the "SPEED" or "MAX" buttons under the "MANUAL" section for direct control.
- HASTIGHED: Allows selection of various fan speeds for continuous ventilation. Tap repeatedly to cycle through available speeds.
- MAKS: Activates the appliance at maximum speed for a set period, typically used for rapid air exchange (e.g., after cooking or showering).
RECIRC Mode:
Tap the "RECIRC" button to activate the recirculation function, if supported by your Fresh Air Appliance. This mode circulates indoor air without introducing fresh outdoor air, which can be useful for mixing air within the home.
Visningsindstillinger:
The "OPTIONS" section displays the current indoor relative humidity percentage. You may also find icons for adjusting display brightness (sun icon) or setting desired humidity levels (water drop icon), depending on the specific firmware version.
Opretholdelse
The ECO-Touch control itself requires minimal maintenance. However, it provides an important indicator for the maintenance of your Fresh Air Appliance.
Filtervedligeholdelse:
When the "FILTER/FILTRE" indicator illuminates on the display, it signifies that the air filters in your Fresh Air Appliance require cleaning or replacement. Refer to your Fresh Air Appliance's manual for detailed instructions on how to access and maintain its filters. Regularly cleaning or replacing filters ensures optimal performance and air quality.
Cleaning the Control:
To clean the touchscreen, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the display or internal components.
Fejlfinding
If you experience issues with your Fantech ECO-Touch control, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Control display is blank. | No power to the control or appliance; loose wiring connection. | Check circuit breaker for the Fresh Air Appliance. Verify all wiring connections are secure. |
| Control not responding to touch. | Midlertidig softwarefejl; snavset skærm. | Gently clean the screen. Disconnect power to the appliance for 30 seconds, then restore power to reset the control. |
| "FILTER/FILTRE" indicator is on. | Air filters are dirty or clogged. | Clean or replace the air filters in your Fresh Air Appliance as per its manual. Reset the filter indicator on the control if applicable (refer to appliance manual). |
| Appliance not operating in ECO mode as expected. | Incorrect settings; environmental conditions not triggering operation. | Ensure ECO mode is selected. Verify indoor humidity and outdoor temperature are within the range that would trigger operation. Consult your appliance manual for ECO mode parameters. |
If the problem persists after attempting these solutions, please contact Fantech customer support or a qualified service technician.
Specifikationer
- Modelnummer: ECO-Touch
- Varenummer: 414728
- Produktdimensioner: 13.72 x 11.43 x 3.81 cm (5.4 x 4.5 x 1.5 tommer)
- Vægt: 158.75 g (0.35 lbs)
- Skærmtype: Touchskærm
- Materiale: Metal
- Farve: Klar
- Ledningsføring: 4-leder forbindelse
- Fabrikant: Fantech
- UPC: 743167976947
- Oprindelsesland: Kina
Garanti og support
Fantech products are manufactured to high-quality standards. For specific warranty details regarding your ECO-Touch controller, please refer to the warranty information included with your Fresh Air Appliance or visit the official Fantech webwebsted. Gem din købsbevis til garantikrav.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Fantech customer support. Contact information can typically be found on the Fantech website or in the documentation provided with your Fresh Air Appliance.
Fantech Official Webwebsted: www.fantech.net
