Indledning
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810n Monochrome Laser Printer. Designed for efficiency and reliability, this printer offers high-speed monochrome printing with advanced features for professional environments.
The Lexmark MS810n is equipped with 256 MB of upgradable memory and a fast dual-core processor, ensuring effortless printing of documents with graphics and images. Its network-ready capabilities make it suitable for various office setups.
Produkt overview
Figur 1: Forside view of the Lexmark MS810n Monochrome Laser Printer, showcasing dens kompakte design og kontrolpanel.
The Lexmark MS810n is a robust monochrome laser printer designed for high-volume printing. Key components include the paper input tray, output bin, control panel with LCD display, and various connectivity ports.
Nøglefunktioner:
- High-speed monochrome printing up to 55 pages per minute (ppm).
- Network-ready with Gigabit Ethernet connectivity.
- 800 MHz dual-core processor and upgradable memory for efficient processing.
- Maximum input capacity of up to 4400 sheets with optional trays.
- High-yield toner cartridges for reduced maintenance.
- Intuitive LCD display for easy navigation and control.
Opsætningsvejledning
1. Udpakning af printeren
- Tag forsigtigt printeren ud af emballagen.
- Remove all packing materials, tapes, and protective films from the exterior and interior of the printer.
- Placer printeren på en stabil, plan overflade med tilstrækkelig ventilation.
2. Installing the Toner Cartridge and Imaging Unit
The Lexmark MS810n requires both a toner cartridge and an imaging unit for operation. Ensure both are correctly installed.
Figure 2: Opening the top cover of the printer to access the toner cartridge and imaging unit bay, indicated by a green tab.
- Open the front access door or top cover of the printer.
- Insert the imaging unit into its designated slot until it clicks into place.
- Unpack the toner cartridge and gently shake it to distribute the toner.
- Insert the toner cartridge into the imaging unit until it locks securely.
- Luk printerdækslet.
3. Ilægning af papir
- Træk papirbakken ud, indtil den stopper.
- Juster papirstyrene, så de passer til størrelsen på det papir, du ilægger.
- Læg papirstakken i bakken, og sørg for, at den er flad og ikke overstiger den maksimale påfyldningslinje.
- Skub forsigtigt papirbakken tilbage i printeren.
4. Tilslutning af printeren
The MS810n supports Ethernet connectivity for network printing.
- Connect one end of an Ethernet cable to the printer's Ethernet port.
- Connect the other end of the Ethernet cable to an active network port or router.
- Tilslut netledningen til printeren og derefter til en jordforbundet stikkontakt.
- Tryk på tænd/sluk-knappen for at tænde printeren.
5. Driver installation
For optimal performance, install the latest printer drivers from the Lexmark official website. The printer is network-ready, allowing for easy integration into existing network infrastructures.
Betjeningsvejledning
Udskrivning af dokumenter
- Sørg for, at printeren er tændt og forbundet til netværket.
- Åbn det dokument, du vil udskrive, fra din computer.
- Vælg "Udskriv" fra programmets menu (f.eks. File > Udskriv).
- Choose "Lexmark MS810n" from the list of available printers.
- Adjust print settings as needed (e.g., number of copies, paper source, print quality).
- Klik på "Udskriv" for at sende jobbet til printeren.
Brug af kontrolpanelet
The LCD display and keypad allow for direct control over printer functions and settings.
- Use the arrow keys to navigate through menus.
- Tryk på OK knappen for at vælge en indstilling.
- De Tilbage knappen vender tilbage til den forrige skærm.
- De Hjem button returns to the main menu.
Direct USB Printing
The Lexmark MS810n features a USB port for direct printing from a USB flash drive.
Figure 3: A hand inserting a USB flash drive into the dedicated USB port located on the top surface of the printer, near the control panel.
- Insert a USB flash drive into the USB port on the front of the printer.
- The printer's display will prompt you to select a document to print.
- Naviger gennem files on the USB drive using the control panel.
- Select the desired document and confirm printing.
Opretholdelse
Udskiftning af tonerkassetten
When the toner level is low, the printer will display a message. Replace the toner cartridge to ensure continued print quality.
- Åbn printerens forreste adgangsdør.
- Grasp the handle of the old toner cartridge and pull it out.
- Unpack the new Lexmark toner cartridge. Gently shake it to distribute the toner.
- Insert the new cartridge into the imaging unit until it clicks into place.
- Luk den forreste adgangsdør.
Udskiftning af billedbehandlingsenheden
The imaging unit has a finite lifespan and will need replacement after a certain number of pages. The printer will notify you when replacement is due.
- Åbn den forreste adgangsdør.
- Remove the toner cartridge from the imaging unit.
- Grasp the handle of the imaging unit and pull it out of the printer.
- Pak den nye billedbehandlingsenhed ud.
- Insert the new imaging unit into the printer until it clicks into place.
- Reinstall the toner cartridge.
- Luk den forreste adgangsdør.
Rengøring af printeren
- Tør printerens yderside af med en blød, tør klud.amp, fnugfri klud.
- Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Periodically clean the paper path rollers if paper jams become frequent. Refer to the on-screen instructions or Lexmark support for detailed steps.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Printeren tænder ikke | Netledning ikke tilsluttet; problem med stikkontakten | Sørg for, at netledningen er korrekt tilsluttet printeren og stikkontakten. Test stikkontakten med en anden enhed. |
| Papirstop | Incorrect paper loading; Overfilled tray; Foreign objects in paper path | Remove jammed paper carefully. Ensure paper is loaded correctly and not overfilled. Check for and remove any foreign objects. |
| Dårlig printkvalitet | Low toner; Worn imaging unit; Incorrect print settings | Replace toner cartridge. Replace imaging unit if necessary. Adjust print quality settings in printer driver. |
| Printer not detected on network | Network cable disconnected; Incorrect IP settings; Firewall blocking connection | Verify Ethernet cable connection. Check printer's IP address and network settings. Temporarily disable firewall to test. |
| Fejlkoder på display | Specifikt internt problem | Note the error code and refer to the Lexmark support website or contact technical support for specific solutions. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | MS810n |
| Udskrivningsteknologi | Laser (monokrom) |
| Maksimal udskrivningshastighed (monokrom) | 55 ppm |
| Maksimal udskriftsopløsning | 1200 x 1200 dpi |
| Processor | 800 MHz Dual-Core |
| Memory (Standard/Maximum) | 512 MB / 2.5 GB (upgradable) |
| Forbindelse | Ethernet, USB 2.0 |
| Max input arkkapacitet | 4400 sheets (with optional trays) |
| Understøttede medietyper | Envelopes, Paper (plain), Transparencies |
| Understøttede mediestørrelser | Up to Legal (8.5 x 14 inch) |
| Display Type | LCD |
| Varens vægt | 52.2 pund |
| Produktdimensioner | 21 x 24.5 x 22 tommer |
Garanti og support
Garantioplysninger
The Lexmark MS810n Monochrome Laser Printer comes with a Begrænset garanti. For specific terms and conditions, including duration and coverage details, please refer to the warranty documentation included with your product or visit the official Lexmark webwebsted.
Teknisk support
For technical assistance, driver downloads, or further troubleshooting, please visit the official Lexmark support webwebsted. Du kan typisk finde supportressourcer, ofte stillede spørgsmål og kontaktoplysninger til kundeservice der.
Official Lexmark Support: www.lexmark.com/en_us/support
