3M Scotch-Grip gummi- og pakningslim 021200-19868 brugsanvisning

Indledning

This manual provides essential instructions for the safe and effective use of the 3M Scotch-Grip Rubber & Gasket Adhesive, Model 021200-19868. Please read all instructions carefully before use to ensure proper application and to prevent injury or product damage. This product is designed for industrial and occupational use only.

Sikkerhedsoplysninger

WARNING: EXTREMELY FLAMMABLE LIQUID AND VAPOR. MAY CAUSE FLASH FIRE. VAPOR HARMFUL. Read all precautions on the product label before use.

3M's industrielle og erhvervsmæssige produkter er beregnet til, mærket og pakket til salg til uddannede industrielle og erhvervsmæssige kunder til brug på arbejdspladsen. Medmindre andet specifikt er angivet på den relevante produktemballage eller i litteraturen, er disse produkter ikke beregnet til, mærket eller pakket til salg til eller brug af forbrugere (f.eks. til hjemmet, personlig brug, folkeskole eller gymnasium, fritids-/sportsbrug eller andre anvendelser, der ikke er beskrevet i den relevante produktemballage eller litteraturen), og skal vælges og anvendes i overensstemmelse med gældende sundheds- og sikkerhedsforskrifter og -standarder (f.eks. US OSHA, ANSI) samt al produktlitteratur, brugervejledninger, advarsler og andre begrænsninger, og brugeren skal træffe alle nødvendige foranstaltninger i henhold til enhver tilbagekaldelse, felthandling eller anden meddelelse om produktbrug. Misbrug af 3M's industrielle og erhvervsmæssige produkter kan resultere i personskade, sygdom, død eller materielle skader. For hjælp til produktvalg og -brug, kontakt din sikkerhedsprofessionelle på stedet, industrihygiejniker eller anden fagekspert. For yderligere produktinformation, besøg www.3M.com.

Produkt overview

The 3M Scotch-Grip Rubber & Gasket Adhesive 021200-19868 is a high-performance, yellow-colored nitrile adhesive designed for bonding rubber and gasket materials. It is supplied in a 5 oz tube and offers a working time of approximately 12 minutes.

Figur 1: 3M Scotch-Grip Rubber & Gasket Adhesive in a 5 oz tube.

Nøglefunktioner

• Materiale kompatibilitet: Specifically formulated for rubber and gasket materials.
• Høj ydeevne: Nitrile-based for strong, durable bonds.
• Arbejdstid: Approximately 12 minutes, allowing for repositioning.
• Farve: Yellow for easy visibility during application.
• Emballage: Convenient 5 oz tube for controlled dispensing.

Opsætning og forberedelse

1. Ventilation: Ensure adequate ventilation in the work area due to flammable vapors. Use in a well-ventilated area or with local exhaust ventilation.
2. Forberedelse af overfladen: Surfaces to be bonded must be clean, dry, and free of oil, grease, dust, and other contaminants. For best results, abrade smooth surfaces lightly.
3. Personligt beskyttelsesudstyr (PPE): Wear appropriate PPE, including safety glasses and chemical-resistant gloves, to prevent skin and eye contact.
4. Temperatur: Apply adhesive at room temperature (typically 65-80°F / 18-27°C) for optimal performance.

Operating and Application

1. Udlevering: Puncture the seal of the tube (if present) and attach the nozzle.
2. Anvendelse: Apply a thin, uniform coat of adhesive to begge surfaces to be bonded. Ensure complete coverage, especially at edges.
3. Åbningstid: Allow the adhesive to dry for approximately 2-5 minutes, or until it becomes tacky to the touch but does not transfer to a knuckle. This is within the 12-minute working time.
4. Binding: Carefully align the two surfaces and press them firmly together. Apply uniform pressure across the entire bonded area.
5. Hærdning: The adhesive will achieve handling strength quickly, but full cure time is approximately 24 hours. Avoid stressing the bond during this period.

Vedligeholdelse og opbevaring

• Rengøringsværktøj: Clean tools and excess adhesive immediately after use with an appropriate solvent (e.g., methyl ethyl ketone or toluene), following solvent manufacturer's safety instructions.
• Opbevaring: Store the adhesive in its original, tightly sealed container in a cool, dry, well-ventilated area, away from direct sunlight and sources of ignition. Keep out of reach of children.
• Bortskaffelse: Dispose of unused adhesive and empty containers according to local, state, and federal regulations.

Fejlfinding

Dårlig vedhæftning:

Ensure surfaces were properly cleaned and dried. Verify that sufficient pressure was applied during bonding. Check if the adhesive was allowed adequate open time to become tacky before joining surfaces.

Adhesive Not Curing:

Confirm that the application temperature was within the recommended range. Allow the full 24-hour cure time before evaluating final bond strength.

Excessive Odor:

Ensure the work area is adequately ventilated. If odor persists or is strong, evacuate the area and improve ventilation before resuming work.

Specifikationer

Garanti og support

For specific warranty information, please refer to the product packaging or contact 3M directly. For technical support or further inquiries, please visit the official 3M website kl www.3M.com eller kontakt deres kundeserviceafdeling.

Yderligere ressourcer

For more information on 3M industrial products and safety guidelines, please visit the 3M Industributik på Amazon.