Indledning
The Yakima FullSwing 4-Bike Hitch Mount Carrier is designed for secure and convenient transportation of up to four bicycles on vehicles equipped with a 2-inch hitch receiver. Its unique swing-away design allows for easy access to your vehicle's rear cargo area, even when fully loaded with bikes. This manual provides essential information for the proper setup, operation, and maintenance of your FullSwing carrier to ensure safe and reliable use.
Image: The Yakima FullSwing 4-Bike Hitch Mount Carrier, showcasing its robust design and capacity.
Sikkerhedsoplysninger
Always prioritize safety when installing and using your bike carrier. Failure to follow these guidelines may result in property damage, injury, or death.
- Vægtgrænser: Do not exceed the maximum total weight capacity of 150 lbs (68 kg) or 40 lbs (18 kg) per bike. Ensure your vehicle's hitch receiver can support this weight.
- Kompatibilitet med anhængertræk: This carrier is designed exclusively for 2-inch hitch receivers. Do not attempt to install on other hitch sizes.
- Sikker installation: Always ensure the SpeedKnob is fully tightened and locked, and the AutoPin feature is engaged, before driving.
- Bike Security: Use all provided ZipStrips and the integrated locking cable to secure bikes firmly to the rack. Bikes should not sway or make contact with each other or the vehicle during transport.
- Klarering: Verify adequate ground clearance and rear vehicle clearance, especially when using the swing-away feature or driving over uneven terrain.
- Forslag 65 Advarsel: Dette produkt kan udsætte dig for kemikalier, der af staten Californien er kendt for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.
Opsætning
Follow these steps for quick and secure installation of your Yakima FullSwing carrier.
- Prepare Hitch Piece: Before inserting, ensure the internal wedge mechanism on the hitch piece is flush. If it's extended, gently push it back until it's even with the end of the hitch bar.
- Indsæt i anhængertræksmodtager: Slide the hitch piece into your vehicle's 2-inch hitch receiver. Push it in until you hear the AutoPin click, indicating it has automatically positioned and locked the rack.
- Install Mast Hardware: Align the mast hardware with the hitch piece. Drop the included bolt into the designated hole and tighten the nut using the provided wrench/bottle opener.
- Tighten SpeedKnob: Rotate the large red SpeedKnob clockwise until the rack is firmly secured and there is no wobble.
- Lock SpeedKnob: Insert the key into the SpeedKnob lock and turn it clockwise to lock the rack to your vehicle. Remove the key.
- Sikkerhedsnål: Insert the red safety pin through the hole on the hitch piece for added security.
For a visual guide on installation, please refer to the official product video below:
Video: Official Yakima FullSwing Premium Hitch Bike Rack installation and feature overview. This video demonstrates the tool-free setup, AutoPin, SpeedKnob, and swing-away functionality.
Image: Detail of the SpeedKnob and integrated lock on the Yakima FullSwing, ensuring secure attachment to the vehicle.
Operating the Rack
Learn how to load your bikes and utilize the convenient swing-away feature.
Indlæsning af cykler
- Stræk armene ud: Release the red trigger finger lever at the top of the mast to extend the fully padded arms.
- Load Bikes: Load bikes onto the carrier, starting with the heaviest bike closest to the vehicle. The rack accommodates a wide range of bicycle styles and sizes. Bikes with non-traditional geometry may require a top tube adapter (sold separately).
- Secure with ZipStrips: Use the zero-hassle ZipStrips to secure each bike to the rack. Ensure bikes are stable and do not move excessively.
- Integreret lås: Extend the integrated locking cable over the bike frames and lock it into place using your key. This provides additional security for your bikes.
Image: The Yakima FullSwing 4-Bike Hitch Mount Carrier securely holding four bicycles, ready for transport.
Using the Swing-Away Feature
The swing-away design allows for effortless access to your vehicle's rear cargo area.
- Loosen Safety Knob: Locate the safety knob near the base of the mast and loosen it.
- Pull Red Pin: Pull the red pin located on the swing-away mechanism.
- Rotate Mast: Gently rotate the mast, with bikes loaded, away from your vehicle until it clicks into the open position (approximately 90 degrees). This provides full access to your trunk or tailgate.
- Return to Driving Position: To return the rack, press the red hinge lever down, rotate the mast back towards the vehicle until the red pin clicks into place, and then tighten the safety knob.
Image: The Yakima FullSwing rack swung away from a vehicle, providing clear access to the rear hatch even with bikes attached.
Opretholdelse
Regular maintenance ensures the longevity and safe operation of your Yakima FullSwing carrier.
- Rensning: Rengør bæreren regelmæssigt med mild sæbe og vand, især efter udsættelse for snavs, salt eller barske vejrforhold. Skyl grundigt og tør.
- Smøring: Periodically apply a silicone-based lubricant to moving parts, such as the swing-away hinge and the SpeedKnob mechanism, to ensure smooth operation.
- Inspicer fastgørelseselementer: Before each use, check all bolts, nuts, and straps for tightness and wear. Replace any worn or damaged components immediately.
- Opbevaring: When not in use, store the carrier in a dry, protected area to prevent corrosion and damage. The rack folds down compactly for storage.
Fejlfinding
Almindelige problemer og deres potentielle løsninger:
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Rack does not fit into hitch receiver. | Internal wedge mechanism is extended; incorrect hitch size. | Ensure wedge is flush before insertion. Verify your vehicle has a 2-inch hitch receiver. |
| Bikes are not secure or sway during transport. | ZipStrips not tight; integrated cable not used; improper bike loading. | Ensure ZipStrips are ratcheted down firmly. Always use the integrated locking cable. Load heaviest bikes first and distribute weight evenly. |
| Swing-away mechanism is stiff or difficult to operate. | Lack of lubrication; dirt/debris in hinge. | Clean the hinge area and apply silicone-based lubricant. Ensure safety knob is fully loosened and red pin is pulled. |
| Nøglen drejer ikke i låsen. | Lock mechanism is jammed or dirty. | Apply a small amount of graphite lubricant to the keyhole. Ensure the SpeedKnob is fully tightened before attempting to lock. |
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | FullSwing 4 (8002465) |
| Kapacitet | 4 Bicycles |
| Max Bike Weight | 40 lbs (18 kg) per bike |
| Max Total Load Capacity | 150 lbs (68 kg) |
| Monteringstype | Hitch Mount (2-inch receiver only) |
| Farve | Sort |
| Dimensioner (L x B x H) | 43.5 x 26 x 17.5 cm (foldet) |
| Vægt | Ca. 56 lbs (25.4 kg) |
| Integrated Locks | SpeedKnob lock, Integrated cable lock (SKS compatible) |
Image: Diagram illustrating bike compatibility and weight limits for the Yakima FullSwing rack.
Garanti og support
Yakima is committed to providing high-quality products and excellent customer service. For specific warranty information regarding your FullSwing 4-Bike Hitch Mount Carrier, please refer to the warranty documentation included with your purchase or visit the official Yakima webwebsted.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Yakima Customer Support through their official website or the contact information provided in your product packaging. Yakima's Same Key System (SKS) allows you to use a single key for all your Yakima products, enhancing convenience and security.
