BOSCH H306 12-tommer bagrudeviskerblad instruktionsmanual

Produkt overview

The Bosch H306 12-inch Rear Wiper Blade is engineered to provide clear visibility and reliable performance for your vehicle's rear windshield. Utilizing high-quality standards, this blade features wear-resistant natural rubber and a specially coated wiping edge for smooth, quiet operation and extended service life. It offers an Original Equipment (OE) fit, function, and appearance, ensuring compatibility with popular domestic, Asian, and European vehicles.

Image: Bosch H306 Rear Wiper Blade, 12-inch. This image shows the complete wiper blade assembly.

Nøglefunktioner

• Nem installation: Har integrerede hurtigklipsforbindelser bagpå for hurtig og problemfri installation.
• Præstation i al slags vejr: Specialbelagt naturgummi sikrer jævn og støjsvag drift og en ren og ensartet aftørring under alle vejrforhold.
• Stille og jævn drift: Designet til støjfri ydeevne, der giver en komfortabel og problemfri køreoplevelse.
• OE-stil bladdesign: Tilbyder OE-pasform, funktion og udseende, der bevarer dit køretøjs originale kvalitet og stil.
• Applikationsspecifik: Konstrueret og designet til anvendelsesspecifikke aftørringssystemer, hvilket gør installationen nem.

Image: Icons illustrating key features: Rear application, clear view without streaks, quick and easy installation, and durable safety.

Installationsvejledning

Follow these steps to replace your Bosch H306 Rear Wiper Blade. Ensure your vehicle is parked safely with the engine off before beginning installation.

Step 1: Remove the Old Wiper Blade

1. Gently lift the wiper arm away from the rear windshield until it locks into an upright position.
2. Locate the release tab or button on the wiper blade connector. Press or lift this tab to disengage the old blade from the wiper arm.
3. Slide the old wiper blade off the wiper arm. Some blades may require a slight wiggle or rotation to release.

Image: A hand demonstrating the removal of an old wiper blade from the wiper arm. The blade is being rotated to disengage from the arm.

Image: The wiper arm is shown without the blade, highlighting the attachment point where the new blade will connect.

Step 2: Install the New Wiper Blade

1. Align the new Bosch H306 wiper blade with the wiper arm. The blade features an integrated quick-clip connection.
2. Slide the new blade onto the wiper arm until it clicks securely into place. Ensure it is fully seated and locked.
3. Gently lower the wiper arm back onto the rear windshield.
4. Test the wiper blade operation to ensure proper function and a clear wipe.

Image: Diagram illustrating the quick and easy installation process of the wiper blade onto the arm.

Image: A series of diagrams showing the steps for installing the wiper blade, from lifting the arm to securing the new blade.

Installationsvideoer

Betjeningsvejledning

Once installed, the Bosch H306 Rear Wiper Blade operates automatically with your vehicle's rear wiper system. Activate your rear wiper as needed for clear visibility during rain, snow, or when the rear window is dirty.

• Ensure the wiper arm is free of obstructions before activation.
• Use windshield washer fluid for optimal cleaning, especially when dealing with dirt or grime.
• The specialty coated natural rubber is designed for smooth, quiet operation, minimizing noise and streaking.

Opretholdelse

Regular maintenance of your wiper blade ensures optimal performance and longevity.

• Rengør regelmæssigt: Wipe the rubber blade edge with a damp cloth or a mild glass cleaner to remove dirt, oil, and road grime. This helps prevent streaking.
• Undersøg for slitage: Periodically check the rubber blade for cracks, tears, or hardening. Replace the blade if you notice any signs of wear or if it starts to streak or chatter.
• Undgå isskrabere: Do not use ice scrapers on the rubber blade, as this can damage the material.
• Vinterpleje: In freezing conditions, lift the wiper arm away from the windshield when parked to prevent the blade from freezing to the glass.

Fejlfinding

If you experience issues with your Bosch H306 Rear Wiper Blade, consider the following common solutions:

• Streaking:
  • Clean the wiper blade and windshield thoroughly.
  • Check for debris lodged in the blade.
  • If cleaning doesn't help, the blade may be worn and require replacement.
• Chattering/Squeaking:
  • Ensure the wiper arm is not bent or damaged, causing uneven pressure.
  • Clean the blade and windshield.
  • Extreme temperatures can sometimes cause temporary chattering; it may resolve as temperatures normalize.
• Incomplete Wipe:
  • Verify the blade is correctly installed and fully seated on the wiper arm.
  • Check if the wiper arm spring tension is adequate. A weak spring may not apply enough pressure.
  • The blade may be worn and need replacement.

Specifikationer

Garantioplysninger

For detailed warranty information regarding your Bosch H306 Rear Wiper Blade, please refer to the official Bosch Automotive website or contact Bosch customer support directly. Warranty terms and conditions may vary by region and product.

Kundesupport

If you have any questions, require assistance with installation, or need further support for your Bosch H306 Rear Wiper Blade, please contact Bosch customer service. You can typically find contact information on the product packaging or the official Bosch Automotive webwebsted.

Visit the official Bosch Automotive store for more products and information: Bosch Automobilbutik