Dremel SC407 EZ SpeedClic slibebånd og dorn brugsanvisning

1. Introduktion

The Dremel SC407 EZ SpeedClic Sanding Bands and Mandrel set provides an efficient solution for sanding, shaping, and smoothing various materials. This innovative SpeedClic system simplifies accessory changes, allowing for quick and easy transitions between tasks.

This accessory set is designed for use with all Dremel Multi-/Rotary tools or other rotary tools with a 3.2mm shank size.

2. Hvad er inkluderet

Your Dremel SC407 EZ SpeedClic Sanding Bands and Mandrel set includes the following components:

• 1 x EZ SpeedClic™ Sanding Mandrel
• 1 x Sanding Band 13 mm, Grit 60 (Coarse)
• 1 x Sanding Band 13 mm, Grit 120 (Medium)

Figure 1: Dremel EZ SpeedClic Mandrel and a sanding band.

3. Opsætning og montering

The EZ SpeedClic system allows for quick and tool-free accessory changes. Follow these steps to attach a sanding band to the mandrel:

1. Trække: Gently pull the top cap of the EZ SpeedClic mandrel upwards. This will release the locking mechanism.
2. Placere: Slide the desired sanding band (Grit 60 or Grit 120) onto the mandrel. Ensure it is seated properly.
3. Skubbe: Push the top cap of the mandrel downwards until it clicks into place, securely locking the sanding band.

Once the sanding band is attached, insert the mandrel's shank into your Dremel rotary tool's collet and tighten it according to your tool's instructions.

Figure 2: Visual guide for attaching a sanding band using the EZ SpeedClic mechanism.

4. Betjeningsvejledning

The Dremel SC407 sanding bands are suitable for a wide range of materials and applications:

• Materialer: Wood, metal, aluminum, silver, copper, stainless steel, brass, gold, plexiglass, plastic, and rubber.
• Ansøgninger: General sanding, shaping, and material removal.

Retningslinjer for brug:

• Select the appropriate grit for your task: Grit 60 for coarse material removal, Grit 120 for finer sanding and smoothing.
• Ensure the sanding band is securely attached to the mandrel before operating your rotary tool.
• Always wear appropriate personal protective equipment (PPE), including eye protection and a dust mask, when sanding.
• Maintain a firm grip on your rotary tool and apply even, moderate pressure to the workpiece.
• The maximum recommended working speed for these sanding bands is 35,000 RPM. Do not exceed this speed.

Figure 3: Dremel tool with EZ SpeedClic sanding band performing a sanding task.

5. Vedligeholdelse

To ensure the longevity and optimal performance of your Dremel EZ SpeedClic Sanding Mandrel and bands, follow these maintenance tips:

• Rensning: After each use, remove any dust or debris from the mandrel and sanding bands. A soft brush or compressed air can be used.
• Opbevaring: Store the mandrel and unused sanding bands in a clean, dry place, away from moisture and direct sunlight.
• Sanding Band Replacement: Replace sanding bands when they become worn, clogged, or lose their abrasive effectiveness. The EZ SpeedClic system makes this process quick and easy.
• Mandrel Inspection: Periodically inspect the mandrel for any signs of wear, damage, or deformation. Replace if necessary to ensure safe operation.

6. Fejlfinding

If you encounter issues while using your Dremel SC407 set, consider the following:

• Sanding Band Not Staying On: Ensure the EZ SpeedClic mandrel's top cap is fully pushed down and locked into place after attaching the sanding band.
• Dårlig slibeevne:
  • Check if the sanding band is worn out and needs replacement.
  • Verify that you are using the correct grit for the material and desired finish.
  • Ensure your rotary tool is operating at an appropriate speed for the task.
• Overdreven vibration: Ensure the mandrel is properly seated and tightened in your rotary tool's collet. Check for any damage to the mandrel or sanding band.

7. Specifikationer

8. Garanti og support

For warranty information, product support, or to purchase additional accessories, please visit the official Dremel website or contact Dremel customer service.

Du kan også besøge Dremel Store on Amazon for flere produkter og information.