Indledning
This instruction manual provides important information regarding the Bridgestone BT028-G 200/50R18 V-MAX Rear Motorcycle Tire. Adhering to these guidelines will help ensure proper installation, safe operation, and extended tire life. Please read this manual thoroughly before installation and use.
Opsætning og installation
Proper installation is critical for tire performance and rider safety. It is strongly recommended that this tire be installed by a qualified professional using appropriate tools and techniques.
Kontrol før installation
- Kompatibilitet: Ensure the tire size (200/50R18) and specifications match your motorcycle manufacturer's recommendations for the rear wheel.
- Inspektion: Before mounting, visually inspect the tire for any manufacturing defects or damage that may have occurred during shipping.
- Rim Condition: Verify that the wheel rim is clean, free from damage, corrosion, or sharp edges.
Monteringsvejledning
- Directional Arrow: Observe the rotational arrow on the tire sidewall. This tire is directional and must be mounted so the arrow points in the direction of forward rotation.
- Smøring: Apply a suitable tire mounting lubricant to the tire beads and rim flanges.
- Montering: Carefully mount the tire onto the rim, ensuring the beads are not pinched or damaged.
- Inflation: Inflate the tire slowly and evenly to seat the beads. Do not exceed the maximum bead seating pressure indicated on the tire sidewall. Once beads are seated, adjust to the recommended operating pressure.
- Balance: After mounting, the tire and wheel assembly must be dynamically balanced to prevent vibration and ensure smooth operation.
Billede 1: Bridgestone BT028-G 200/50R18 V-MAX Rear Motorcycle Tire. This image displays the tire's tread pattern and sidewall markings, including the directional arrow which is crucial for correct installation.
Driftsvejledninger
Adhering to proper operating practices will maximize tire performance and safety.
Dæktryk
- Maintain tire pressure according to your motorcycle manufacturer's recommendations, not the maximum pressure listed on the tire sidewall.
- Check tire pressure frequently, at least once a week and before every long ride, when tires are cold.
- Forkert dæktryk kan føre til for tidligt slid, nedsat håndtering og øget risiko for dækskade.
Indbrudsperiode
New tires require a break-in period of approximately 100 miles (160 km) of moderate riding. During this period, avoid sudden acceleration, hard braking, and aggressive cornering to allow the tire's surface to scuff in and achieve optimal grip.
Load and Speed Ratings
- Do not exceed the load capacity or speed rating indicated on the tire sidewall. These ratings are critical for safe operation.
- Overloading or exceeding the speed rating can lead to tire overheating and sudden failure.
Opretholdelse
Regelmæssig vedligeholdelse forlænger dækkenes levetid og sikrer ensartet ydeevne.
Dæk inspektion
- Slidbaneslid: Regularly check the tread depth. Replace the tire when the tread reaches the wear indicators (typically 0.8mm for motorcycles).
- Skade: Inspect for cuts, punctures, cracks, bulges, or any other signs of damage. Any significant damage warrants immediate professional inspection.
- Fremmedobjekter: Remove any embedded stones, nails, or other foreign objects from the tread.
Rengøring og opbevaring
- Clean tires with mild soap and water. Avoid harsh chemicals or petroleum-based cleaners that can degrade rubber.
- When storing a motorcycle for an extended period, ensure tires are properly inflated and ideally off the ground to prevent flat spots. Store in a cool, dry place away from direct sunlight and ozone-producing equipment.
Fejlfinding
Dette afsnit omhandler almindelige dækrelaterede problemer.
Fælles problemer og løsninger
- Ujævnt slid: Often caused by incorrect tire pressure, improper balancing, or suspension issues. Check pressure, re-balance, and inspect suspension components.
- Vibration: Typically indicates an unbalanced wheel, bent rim, or damaged tire. Have the tire and wheel assembly inspected and re-balanced by a professional.
- Slow Air Loss: Could be a small puncture, valve stem issue, or bead leak. Locate the source of the leak and repair or replace the component as necessary. Punctures in the tread area may be repairable by a professional, but sidewall punctures usually require tire replacement.
- Bulges or Cracks: These are serious indicators of internal tire damage. Do not ride on a tire with bulges or significant cracks; replace it immediately.
For any issues not covered here or if you are unsure about the condition of your tire, consult a professional motorcycle tire technician.
Specifikationer
Key technical specifications for the Bridgestone BT028-G 200/50R18 V-MAX Rear Motorcycle Tire.
| Feature | Specifikation |
|---|---|
| Mærke | Bridgestone |
| Model | BT028-G 129311 |
| Størrelse | 200/50R18 |
| Sektionsbredde | 200 millimeter |
| Fælgbredde | 18 tommer |
| Slidbanetype | Retningsbestemt |
| Konstruktionstype | Radial |
| Belastningsområde | J |
| Varens vægt | 17 pund |
| UPC | 092971198107 |
| Automotive Fit Type | Universal Fit |
Garanti og support
Bridgestone tires are covered by a manufacturer's warranty against defects in materials and workmanship. Specific warranty terms and conditions may vary by region and purchase date.
For detailed warranty information, claims, or technical support, please refer to the official Bridgestone website or contact your authorized Bridgestone dealer. Keep your purchase receipt as proof of purchase.
Official Bridgestone Webwebsted: www.bridgestone.com
