Testo 0560 8312 830-T1 IR-termometer brugsanvisning

1. Introduktion

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. Sikkerhedsoplysninger

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• Brug ikke enheden i eksplosive atmosfærer.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• Hold enheden ren og tør.
• Brug kun enheden til det tilsigtede formål som beskrevet i denne manual.
• Reparationer bør kun udføres af autoriseret personale.

3. Produktet er slutview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

Figur 2: Forside view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 Komponenter

• Infrarød sensor: Located at the front of the device, used for non-contact temperature measurement.
• Dual Laser Pointer: Two laser dots indicate the measurement spot size.
• Vise: Shows temperature readings, measurement units, battery status, and other indicators.
• Målingsudløser: Aktiverer målingen og laseren.
• Kontrolknapper: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• Batterirum: Placeret i håndtaget til installation af batteri.

4. Opsætning

4.1 Batteriinstallation

1. Find batteridækslet på termometerets håndtag.
2. Åbn låget.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. Luk batterirummets dæksel forsvarligt.

4.2 Første opstart og valg af enhed

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. Betjeningsvejledning

5.1 Tage en måling

1. Ret den infrarøde sensor mod målobjektet.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. Temperaturaflæsningen vil vises på displayet.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

5.3 MIN/MAX-funktion

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Justering af emissivitet

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• 0.85-0.90: Concrete, brick, rough wood.
• 0.60-0.70: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. Vedligeholdelse

6.1 Rengøring

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 Udskiftning af batteri

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

6.3 Opbevaring

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. Fejlfinding

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• Enheden tændes ikke:
  • Check if batteries are correctly inserted with proper polarity.
  • Udskift batterierne med nye.
• Unøjagtige aflæsninger:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • Avoid measuring through glass or highly reflective surfaces.
• Laser ikke synlig:
  • Kontroller batteriniveauet.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webwebsted.

Fabrikant: Testo SE & Co.

Gem venligst dit købsbevis for garantikrav.