Atlantic Full Motion TV Wall Mount PN63607068 Instruction Manual

1. Introduktion

Thank you for choosing the Atlantic Full Motion TV Wall Mount. This mount is designed to securely hold flat-panel televisions ranging from 37 inches to 64 inches, offering versatile viewing angles and space-saving capabilities. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

2. Sikkerhedsoplysninger

ADVARSEL:

• For stud mounting, use only lag bolts.
• Plastic anchors are only for concrete, stone, or masonry installations.
• Dette produkt er designet til brug i træstolper og massive betonvægge. MÅ IKKE installeres i gipsvæg alene.
• Ensure the TV's weight, including accessories, does not exceed 132 lbs (60 kg).
• Improper use could result in serious injury or property damage.
• Always ensure all bolts are securely tightened before hanging the TV.

If you have any questions or concerns during installation, please contact customer support.

3. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede, før installationen påbegyndes:

• TV Wall Mount Assembly (1)
• Standard Mounting Hardware (various screws, washers, spacers)
• Small Tool (1)
• Velcrostropper (2)
• Instruktionsmanual (1)

4. Produktfunktioner

• Universelt design: Compatible with 37" - 84" flat-panel TVs up to 132 lbs. VESA certified 100mm x 100mm to 600mm x 400mm.
• Adjustable Optimal Viewing: Features +5°/-15° tilt and +/-180° swivel for flexible viewing vinkler.
• Pladsbesparende design: Retracts to 3.1" from the wall and extends up to 21.5" for maximum versatility.
• Holdbar konstruktion: Built with solid heavy gauge steel and a durable coated finish for secure support.

5. Opsætning og installation

Before you begin, ensure you have the necessary tools (not included): tape measure, pencil, screwdriver, electric drill, stud finder, and possibly a hammer drill for concrete walls.

5.1. Montering af beslag på tv'et

Identify the correct screws and washers for your TV's VESA mounting holes. For flat-back TVs, screws may connect directly. For curved or concave-back TVs, use appropriate spacers and washers to ensure a secure fit.

Billede: Overview of the Atlantic Full Motion TV Wall Mount components.

Attach the TV brackets to the back of your television using the selected screws and washers. Ensure they are securely fastened but do not overtighten.

5.2. Attaching Wall Plate to Wall

For Wood Stud Mounting:

1. Locate wood studs using a stud finder. Mark the center of the studs.
2. Position the mounting template (provided) at your desired height and align the holes with your stud center line. Mark the drill locations.
3. Bor pilothuller med et bor med en diameter på 7 mm (32/5.5 in.).
4. Install the wall plate using the lag bolts. Tighten the lag bolts only until the wall plate is firmly against the wall. Do not overtighten.

For Solid Concrete Wall Mounting:

1. Position the mounting template at your desired height on the concrete surface. Mark the drill locations.
2. Drill pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit, to a depth of 2.5 in. (64 mm).
3. Insert plastic anchors into the drilled holes. Ensure they are flush with the concrete surface.
4. Install the wall plate using the lag bolts. Tighten the lag bolts only until the wall plate is firmly against the wall. Do not overtighten.

Image: The TV wall mount with a transparent TV outline, illustrating how the mount supports the television.

5.3. Hanging and Securing TV to Wall Plate

Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is level. Once positioned, secure the TV to the wall plate using the locking mechanisms or screws as indicated in the detailed instructions provided with the product.

Image: The Atlantic Full Motion TV Wall Mount extended from the wall, holding a television in a living room setting.

6. Betjeningsvejledning

The Atlantic Full Motion TV Wall Mount allows for easy adjustment to achieve optimal viewing vinkler.

6.1. Hældningsjustering

The mount allows for a tilt range of +5° (upward) to -15° (downward). To adjust the tilt, loosen the tilting bolts (usually located on the side of the TV plate), set the TV to your desired angle, and then tighten the bolts to secure it in place.

Image: Diagram illustrating the +5° to -15° tilt adjustment range of the TV wall mount.

6.2. Drejejustering

The mount offers a +/-180° swivel capability. Gently push or pull the TV to the left or right to achieve your desired viewing angle. The articulating arms will extend and retract smoothly.

Image: Diagram illustrating the +/-180° swivel adjustment range of the TV wall mount.

6.3. Udvidelse og tilbagetrækning

To extend the TV from the wall, gently pull the screen forward. To retract, push the screen back towards the wall until it reaches its home position (3.1" from the wall).

6.4. Kabelforvaltning

Use the provided Velcro straps to organize and secure cables along the articulating arms to maintain a neat appearance and prevent damage.

7. Vedligeholdelse

• Kontrollér regelmæssigt alle skruer og bolte for at sikre, at de forbliver stramme og sikre.
• Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Do not hang anything on the mount or TV that exceeds the specified weight limit.

8. Fejlfinding

9. Specifikationer

• Modelnummer: 63607068
• Kompatible tv-størrelser: 37" - 84" (optimal for 37" - 64" as per product title)
• Maksimal vægtkapacitet: 132 lbs (60 kg)
• VESA-kompatibilitet: 100 mm x 100 mm til 600 mm x 400 mm
• Vippevinkel: +5° / -15°
• Drejevinkel: +/-180°
• Distance from Wall (Retracted): 3.1 tommer
• Distance from Wall (Extended): 21.5 tommer
• Produktdimensioner: 3.25 x 25.63 x 11.5 tommer
• Varens vægt: 15.7 pund
• Materiale: Metal; Plastic
• Farve: Sort

10. Garanti og support

For warranty information or technical support, please refer to the product packaging or contact Atlantic customer service directly. Keep your purchase receipt for warranty claims.