Project E Beauty Pro High Frequency Galvanic Roller Beauty Facial Skin Care Spa Salon Machine

1. Produktet er slutview

The Project E Beauty Pro High Frequency Galvanic Roller is a professional-grade device designed for facial skin care. It combines high frequency and galvanic technologies to help improve skin texture, circulation, and product absorption. This machine is suitable for use in spa, salon, or home settings, offering a comprehensive solution for various skin concerns.

Billede 1.1: The Project E Beauty Pro High Frequency Galvanic Roller machine, showcasing its main unit with control knobs and various attachments including the roller, glass electrodes, and power cord.

2. Sikkerhedsforanstaltninger

Before operating the device, please read and understand all safety instructions. Improper use can lead to injury or damage to the device.

• Always ensure your hands are dry before plugging in or unplugging the device.
• Brug ikke enheden i nærheden af ​​vand eller i damp miljøer.
• Opbevar enheden utilgængeligt for børn.
• Consult a physician before use if you have any pre-existing medical conditions, especially heart conditions, epilepsy, or are pregnant.
• Må ikke anvendes på beskadiget, irriteret eller inficeret hud.
• Undgå direkte kontakt med øjnene.
• Træk stikket ud af enheden, når den ikke er i brug, og før rengøring.
• Use only the accessories provided or approved by Project E Beauty.

3. Opsætning

1. Udpakning: Carefully remove all components from the packaging. Verify that all parts are present: main unit, power cord, high frequency electrodes (various shapes), and galvanic roller/accessories.

2. Placering: Place the main unit on a stable, flat, and dry surface, away from direct sunlight or heat sources.

3. Strømtilslutning: Insert the power cord into the power input port on the back of the main unit, then plug the other end into a suitable electrical outlet.

4. Attaching Electrodes/Roller:

   • For High Frequency: Gently insert the desired glass electrode into the high frequency handle. Ensure it is securely seated.
   • For Galvanic: Connect the galvanic roller or other galvanic accessories to their respective ports on the main unit.

5. Ensure all connections are firm before powering on the device.

4. Betjeningsvejledning

This section details the operation of both High Frequency and Galvanic functions.

4.1. High Frequency Operation

1. Forberedelse: Ensure the skin is clean and dry. Apply a thin layer of gauze or a suitable high-frequency cream/serum to the treatment area.

2. Tænd: Turn on the main power switch. Select the High Frequency function.

3. Elektrodeindsættelse: Insert the chosen glass electrode into the high frequency handle. Ensure the intensity knob is at its lowest setting before starting.

4. Anvendelse: Place the electrode directly onto the skin before turning up the intensity to avoid a mild shock. Slowly increase the intensity using the High Frequency intensity knob until a comfortable sensation is felt.

5. Behandling: Move the electrode in circular motions over the treatment area. Typical session duration is 5-10 minutes per area.

6. Færdiggørelse: Lower the intensity to zero, then remove the electrode from the skin before turning off the High Frequency function.

4.2. Galvanic Operation

1. Forberedelse: Cleanse the skin thoroughly. Apply a conductive gel or solution suitable for galvanic treatments. Ensure the client holds the passive electrode (if applicable) or that the active electrode is properly grounded.

2. Tænd: Turn on the main power switch. Select the Galvanic function.

3. Polarity Selection: Select the desired polarity (positive or negative) based on the treatment goal (e.g., desincrustation or iontophoresis).

4. Anvendelse: Place the galvanic roller or chosen active electrode onto the skin. Slowly increase the intensity using the Galvanic intensity knob until a comfortable sensation is felt. The client should feel a slight tingling.

5. Behandling: Glide the electrode smoothly over the skin, maintaining constant contact. Avoid lifting the electrode from the skin while the current is active. Typical session duration is 10-15 minutes.

6. Færdiggørelse: Lower the intensity to zero, then remove the electrode from the skin before turning off the Galvanic function.

5. Vedligeholdelse

Korrekt vedligeholdelse sikrer din enheds levetid og optimale ydeevne.

• Rengøring af hovedenheden: Tør hovedenhedens yderside af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke enheden i vand.

• Cleaning Electrodes/Accessories:

  • Glass Electrodes: Gently wipe glass electrodes with a soft cloth dampened with alcohol or a mild disinfectant. Allow them to air dry completely before storage. Handle with care as they are fragile.
  • Galvanic Roller/Metal Parts: Clean with a mild disinfectant solution and wipe dry.

• Opbevaring: Store the device and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Keep all components in their original packaging or a protective case to prevent damage.

• Ledningspleje: Do not wrap the power cord tightly around the unit. Avoid kinking or twisting the cord.

6. Fejlfinding

Hvis du støder på problemer med din enhed, kan du se følgende almindelige problemer og løsninger:

Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte Project E Beautys kundesupport for yderligere assistance.

7. Specifikationer

8. Garanti og support

Project E Beauty products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Project E Beauty webwebsted.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Project E Beauty customer service. Contact details can typically be found on the product packaging or the official brand webwebsted.

Note: Always purchase genuine Project E Beauty products from authorized retailers to ensure warranty validity and product authenticity.