Schneider Electric HOM2175SB

Schneider Electric HOM2175SB Homeline SurgeBreaker Instruction Manual

Mærke: Schneider Electric

Model: HOM2175SB

1. Produktet er slutview

The Schneider Electric HOM2175SB Homeline SurgeBreaker is a secondary surge arrestor designed to protect electrical service and major household appliances within Homeline load centers. This device is suitable for 3-wire, 120/240 VAC single-phase systems and features a NEMA 1 indoor rating. It provides protection against electrical surges, helping to safeguard your home's electrical system and connected equipment.

Nøglefunktioner:

  • Compatible exclusively with Square D Homeline load centers.
  • Offers equal surge protection to circuits and receptacles throughout the home.
  • Includes an LED indicator for operational status.
  • Features a plug-on installation, requiring two pole positions.
  • UL 1449 3rd Edition Listed.
Schneider Electric HOM2175SB Homeline SurgeBreaker

Figure 1: The Schneider Electric HOM2175SB Homeline SurgeBreaker device.

2. Sikkerhedsoplysninger

ADVARSEL: Installation and servicing of this equipment should only be performed by qualified electrical personnel. Failure to follow these instructions can result in serious injury or death. Always disconnect power at the main service panel before working on electrical equipment.

  • Sørg for, at alle lokale og nationale elektriske forskrifter følges under installationen.
  • Verify the device is compatible with your specific load center model (Homeline only).
  • Do not attempt to repair a damaged unit. Replace it immediately.

3. Opsætning og installation

The HOM2175SB SurgeBreaker is designed for straightforward plug-on installation in Square D Homeline load centers. It occupies two pole positions.

  1. Strømafbrydelse: Before beginning installation, ensure the main power to the electrical panel is completely disconnected. Verify with a voltage tester.
  2. Locate Positions: Identify two adjacent pole positions within your Homeline load center. For optimal protection, install the SurgeBreaker in the slots closest to the main breaker.
  3. Plug-on Installation: Align the SurgeBreaker with the designated bus bar connections and firmly press it into place until it is securely seated.
  4. Neutral Connection: Connect the white neutral wire from the SurgeBreaker to the neutral bar in the load center.
  5. Jordforbindelse: Connect the green ground wire from the SurgeBreaker to the ground bar in the load center.
  6. Gendan strøm: Once installation is complete and all connections are secure, restore power to the main service panel.

Video 1: En overview of the Square D Homeline SurgeBreaker and its installation process.

Comparison of Square D QO and Homeline Surge Protection Devices

Figure 2: Illustrates the compatibility of the HOM2175SB with Homeline panels, distinguishing it from QO series devices.

4. Betjeningsvejledning

The HOM2175SB SurgeBreaker operates automatically to detect and divert harmful electrical surges away from your home's electrical system. No user interaction is required for its primary function.

LED-indikator: The device is equipped with an LED indicator light. When the LED is illuminated green, it signifies that the SurgeBreaker is operational and providing surge protection. If the LED is off, the unit requires replacement.

5. Vedligeholdelse

The HOM2175SB SurgeBreaker requires minimal maintenance. The primary maintenance task is to periodically check the status of the LED indicator light.

  • Regelmæssig inspektion: Periodically inspect the SurgeBreaker's LED indicator. It should be illuminated green, indicating proper function.
  • Udskiftning: If the LED indicator is off, the SurgeBreaker has absorbed a significant surge or has reached the end of its service life and needs to be replaced.

6. Fejlfinding

The main troubleshooting step for the HOM2175SB SurgeBreaker involves its operational status indicator.

  • LED slukket: If the green LED indicator is off, the SurgeBreaker is no longer providing surge protection. This indicates that the device has either sacrificed itself to protect your system from a surge or has failed. In this event, the unit must be replaced.
  • Ingen strøm: If there is no power to the panel after installation, ensure all connections are secure and the main breaker is on. If issues persist, consult a qualified electrician.

Vigtig: Do not attempt to open or repair the SurgeBreaker. Contact a qualified electrician for replacement.

7. Specifikationer

SpecifikationVærdi
ModelnummerHOM2175SB
Voltage Bedømmelse120 / 240 VAC
FasetypeEnkeltfase
Ledningskonfiguration3-wire
Maximum Surge Current Rating (SCCR)22.5 kA
Nominel afgangsstrøm (ind)5 kA
Voltage Protection Rating (VPR)700V LN, 1500V LL
Bedømmelse af kabinetNEMA 1 (indendørs)
MonteringPlug-on, requires 2 pole spaces
IndikatorGreen LED (OK) / Off (Replace)
CertificeringerUL 1449 3rd Edition Listed
Produktdimensioner65.5 mm L x 50.8 mm B x 79.5 mm H (2.58 mm L x 2 mm B x 3.13 mm H)
Vægt5.92 ounce (0.168 kg)
Technical benefits of Square D Homeline SurgeBreaker

Figure 3: Technical benefits and features of the SurgeBreaker, including warranty and surge capacity.

Dimensions of Square D HOM2175SB SurgeBreaker

Figure 4: Detailed dimensions of the HOM2175SB SurgeBreaker.

8. Garanti og support

The Schneider Electric HOM2175SB Homeline SurgeBreaker comes with a warranty that covers the device and connected equipment.

  • Garantiperiode: 3 years from the date of purchase or 2 years following the installation date, whichever occurs earlier.
  • Beskyttelse af tilsluttet udstyr: The warranty includes coverage for up to $10,000 for major household appliances damaged by a surge while properly connected to a protected circuit. This typically excludes electronic devices like microwaves or countertop appliances.

For technical support, warranty claims, or further information, please contact Schneider Electric customer service or visit their official webwebsted.

Relaterede dokumenter - HOM2175SB

Preview Schneider Electric Surge Protective Devices (SPDs) Catalog
Comprehensive catalog detailing Schneider Electric's Surge Protective Devices (SPDs), including EMA Series, EBA Series, Surgelogic, HWA, XR, SDSA, Surgebreaker Plus, and HEPD product lines for residential and commercial applications.
Preview Overspændingsbeskyttelse til hele hjemmet QO250PSPD, HOM250PSPD - Installation og garanti
Installationsvejledning og garantioplysninger for Schneider Electrics overspændingsbeskyttelsesenheder til hele hjemmet, modellerne QO250PSPD og HOM250PSPD. Beskytter mod overspænding i private hjem.
Preview Schneider Electric Homeline-belastningscentre: Hovedkabelsko og hovedafbrydere
Dette dokument beskriver Schneider Electrics Homeline indendørs hovedkabelsko og hovedafbryderbelastningscentre, inklusive tilbehør som overspændingsbeskyttelsesenheder og konvertible hovedbelastningscentre. Det indeholder specifikationer, katalognumre og applikationsinformation for forskellige modeller.
Preview Schneider Electric Acti9 A9E1832 Faseindikatorlampe - Installations- og teknisk vejledning
Officielle installationsvejledninger og tekniske specifikationer for Schneider Electric Acti9 A9E1832 3-faset indikatorlampe. Lær om dens funktioner, tilslutning og sikkerhedsretningslinjer.
Preview Easergy P3 Universal Relays P3U10, P3U20, P3U30 User Manual | Schneider Electric
User manual for Schneider Electric's Easergy P3 Universal Relays (P3U10, P3U20, P3U30), covering installation, configuration, protection, measurement, and control functions for electrical distribution systems.
Preview Schneider Electric Resi9 R9H1342/R9H1842 Installations- og sikkerhedsvejledning
Dette dokument indeholder vigtige sikkerhedsforanstaltninger og installationsinstruktioner til Schneider Electric Resi9 R9H1342 og R9H1842 elektriske kabinetter med vægt på kvalificeret personale og overholdelse af lovgivningen.