Brugermanual til MICROWARE Handy USB-kassetteafspiller og bånd-til-MP3 digital konverter

1. Introduktion

The MICROWARE Handy USB Cassette Player is a portable device designed to convert your analog cassette tape recordings into digital MP3 files. This manual provides detailed instructions for setting up, operating, and maintaining your device, ensuring a smooth conversion process.

2. Produktet er slutview

This device allows you to preserve your old cassette tapes by converting their audio content into a digital format. The converted MP3 files can be played on computers, portable music players, or burned to CDs. Its compact design makes it easy to use and transport.

Billede 1: The MICROWARE Handy USB Cassette Player, shown connected to a laptop. The laptop screen displays audio editing software with waveform visualizations, indicating the digital conversion process. The cassette player itself is black and silver, with a clear window showing a cassette tape reel. Earbuds are also visible, connected to the player.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x USB Cassette Player
• 1 x USB-kabel
• 1 x Software CD (containing Audacity editing software)
• 1 x Brugermanual (dette dokument)
• 1 x høretelefon

4. Systemkrav

Before proceeding with setup, ensure your computer meets the following minimum requirements:

• Tilgængelig USB-port
• Pentium 4 CPU or above
• 512MB RAM eller derover
• 1 GB ledig harddiskplads
• CD-ROM-drev til softwareinstallation
• Operating System: Windows 2000, XP, Vista, Seven (Note: Audacity software is also compatible with macOS and newer Windows versions, though specific instructions may vary.)

5. Opsætning

1. Strømforsyning: Insert 2 AA batteries (not included) into the battery compartment, or connect the device to a USB power source (e.g., computer USB port) using the provided USB cable.
2. Software installation:
   • Sæt den medfølgende software-cd i computerens cd-rom-drev.
   • Follow the on-screen instructions to install the Audacity audio editing software. If you do not have a CD-ROM drive or prefer a newer version, Audacity can be downloaded from its official webwebsted.
3. Tilslut til computer: Connect the USB Cassette Player to an available USB port on your computer using the provided USB cable. Your computer should recognize the device automatically.
4. Lydudgang: For listening directly, connect the included earphones or your preferred headphones to the 3.5mm audio output jack on the cassette player. Alternatively, connect the audio output to a stereo system or external speakers.

6. Operating Instructions (Tape Playback & MP3 Conversion)

6.1. Basic Tape Playback

1. Open the cassette compartment and insert a cassette tape. Close the compartment securely.
2. Connect earphones or external speakers to the audio output jack.
3. Tryk på SPIL knappen for at starte afspilning.
4. Brug BIND control to adjust the listening level.
5. Tryk på STOP knappen for at afslutte afspilningen.
6. Other controls include HURTIG FREM, SPOLE TILBAGE, og AUTO TILBAGE (if available on your model).

6.2. Converting Tapes to MP3 using Audacity

This process outlines the general steps for converting audio using Audacity. Specific menu options may vary slightly depending on your Audacity version and operating system.

1. Forbered enheden: Ensure the USB Cassette Player is connected to your computer via USB and powered on. Insert the cassette tape you wish to convert.
2. Launch Audacity: Åbn Audacity-softwaren på din computer.
3. Configure Audio Settings (Audacity):
   • In Audacity, locate the audio input/output settings (often found in the toolbar or under Edit > Preferences > Devices or Opsætning af lyd).
   • Select the USB Cassette Player as the input device. It may appear as "USB PnP Audio Device" or similar.
   • Set the recording channels to "1 (Mono)" or "2 (Stereo)" as appropriate for your tape.
4. Juster optageniveau:
   • Start playing the cassette tape on the USB Cassette Player.
   • In Audacity, observe the recording level meters. Adjust the volume control on the cassette player and/or the input level slider in Audacity to ensure the audio signal is strong but does not peak into the red (clipping), which can cause distortion.
   • Trykke STOP on the cassette player once the level is set.
5. Start optagelse:
   • In Audacity, click the red Optage knap.
   • Tryk straks på SPIL button on the USB Cassette Player.
   • Allow the entire side of the tape to play through.
6. Stop optagelse:
   • Once the tape side has finished, press the square Stop button in Audacity.
   • Tryk på STOP button on the USB Cassette Player.
7. Edit and Export:
   • You can use Audacity's tools to edit the recorded audio (e.g., trim silence, remove noise, split tracks).
   • To save as an MP3 file, gå til File > Export > Export as MP3.
   • Choose a destination folder, filename, and desired MP3 quality (e.g., 128 kbps is often sufficient for cassette audio).
   • Klik Spare.
8. Gentage: Flip the tape and repeat the process for the other side, or insert a new tape.

7. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enhedens yderside. Brug ikke flydende rengøringsmidler eller opløsningsmidler.
• Hovedrensning: Periodically clean the tape heads with a specialized cassette head cleaning solution and swab to ensure optimal sound quality.
• Opbevaring: Opbevar enheden et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Udskiftning af batteri: If using batteries, replace them when playback quality degrades or the device fails to power on. Remove batteries if the device will not be used for an extended period.

8. Fejlfinding

• Ingen strøm:
  • Kontroller, om batterierne er isat korrekt, og om de ikke er opbrugte.
  • Ensure the USB cable is securely connected to both the device and a powered USB port.
• No Sound during Playback:
  • Verify headphones/speakers are properly connected and functional.
  • Adjust the volume control on the cassette player.
  • Ensure the tape is inserted correctly and playing.
• No Audio Input in Audacity:
  • Confirm the USB Cassette Player is selected as the input device in Audacity's preferences.
  • Check your computer's sound settings to ensure the "USB PnP Audio Device" is enabled and selected as the input.
  • Ensure the USB cable is not faulty.
• Poor Recording Quality:
  • Clean the tape heads of the cassette player.
  • Adjust recording levels in Audacity to avoid clipping (too loud) or low signal (too quiet).
  • Ensure the cassette tape itself is in good condition.
  • Prøv en anden USB-port eller et andet kabel.
• Software CD not working:
  • Download the latest version of Audacity directly from its official webwebsted.

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact MICROWARE customer service directly. Contact details can typically be found on the product packaging or the official MICROWARE webwebsted.