Kingston Brass KS8105DL+ Concord Pot Filler Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kingston Brass KS8105DL+ Concord Pot Filler. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.

The Kingston Brass KS8105DL+ Concord Pot Filler is designed for convenient water access directly over your stovetop, featuring a sleek cylindrical design and a swing-arm spout for extended reach. Crafted from solid brass, it offers durability and a premium finish.

2. Sikkerhedsoplysninger

Overhold venligst følgende sikkerhedsforanstaltninger under installation og brug:

• Always turn off the main water supply before installing or performing maintenance on the pot filler.
• Brug passende personlige værnemidler, såsom sikkerhedsbriller og handsker, under installationen.
• Sørg for, at alle forbindelser er sikre og vandtætte for at forhindre lækager.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Do not use harsh chemicals or abrasive cleaners on the finish, as this may damage the product.

3. komponenter

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Pot Filler Faucet Assembly (main body with swing arms and spout)
• Wall Mount Flange/Escutcheon
• Mounting Hardware (screws, anchors if applicable)
• Installationsvejledning (denne vejledning)

Note: Specific fasteners may vary. Ensure you have appropriate tools for your wall type.

Figur 1: Kingston Brass KS8105DL+ Concord Pot Filler, Oil Rubbed Bronze. This image displays the pot filler in its folded position, showcasing the wall-mounted base, the two articulated arms, and the spout with its control handle, all in a dark, oil-rubbed bronze finish.

4. Installation

The Kingston Brass KS8105DL+ Pot Filler requires a single-hole wall mount installation. Follow these steps carefully:

1. Prepare Water Supply: Turn off the main water supply to your kitchen. Open a nearby faucet to relieve any pressure in the lines.
2. Bestem monteringssted: Choose a suitable location on the wall above your stovetop, ensuring it allows for the full 21-1/2 inch spout reach and 4-inch spout clearance. The mounting point should be structurally sound to support the faucet's weight and operation.
3. Install Water Line: Ensure a 1/2-inch-14 NPS male threaded inlet is available at the chosen mounting point. If not, a qualified plumber should install one.
4. Monter vandhanen:
   • Apply plumber's tape to the threads of the water inlet pipe extending from the wall.
   • Thread the pot filler's base onto the water inlet pipe. Hand-tighten first, then use a wrench to secure it, ensuring the faucet is level and oriented correctly. Do not overtighten.
   • Position the wall mount flange/escutcheon against the wall, covering the connection point. Secure it if necessary with provided screws or sealant.
5. Tjek for lækager: Slowly turn the main water supply back on. Inspect all connections for leaks. If leaks are detected, turn off the water supply and re-tighten connections as needed.
6. Skyl systemet: Before first use, open the pot filler's handle and allow water to run for a few minutes to flush out any debris from the water lines.

Professional installation is recommended for optimal performance and to ensure compliance with local plumbing codes.

5. Betjening

Operating your Concord Pot Filler is straightforward:

• Extend the Spout: Gently pull the articulated arms away from the wall to extend the spout over your pot or cooking vessel. The spout offers a 360-degree turn and a maximum reach of 21-1/2 inches from the wall.
• Turn Water On/Off: The pot filler features a 1/4 turn ceramic cartridge mechanism. Rotate the handle to turn the water on or off.
• Retract the Spout: After use, gently push the articulated arms back towards the wall until the pot filler is in its folded, compact position.

The maximum flow rate is 1.8 gallons per minute (GPM) at 60 PSI, designed to efficiently fill pots while conserving water.

6. Vedligeholdelse

Proper care will ensure the lasting beauty and performance of your Kingston Brass pot filler:

• Rensning: Clean the surface regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry immediately to prevent water spots.
• Undgå skrappe rengøringsmidler: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any cleaners containing bleach, acids, or alcohol. These can damage the oil rubbed bronze finish and void your warranty.
• Ceramic Disc Cartridge: The pot filler is equipped with a durable ceramic disc cartridge, which typically requires no maintenance. If you experience persistent drips or leaks, the cartridge may need replacement. Consult a plumber or Kingston Brass support.

7. Fejlfinding

If you encounter issues with your pot filler, refer to the following common solutions:

If troubleshooting steps do not resolve the issue, please contact Kingston Brass customer support.

8. Specifikationer

9. Garanti og support

Garanti: Kingston Brass offers a Ten Year Limited Warranty to the original consumer, ensuring the product is free from defects in material and finish. This warranty covers manufacturing defects under normal use and service.

Kundesupport: For technical assistance, warranty claims, or to order replacement parts, please contact Kingston Brass customer service. You can find contact information and additional resources on the official Kingston Brass website or by visiting their store on Amazon: Kingston Brass Amazon Store.