Friedrich KWIFI Wi-Fi Kit User Manual

1. Introduktion

The Friedrich KWIFI Wi-Fi Kit is designed to enhance the functionality of your Friedrich Kuhl and Kuhl+ N-Series air conditioning units. This adapter enables wireless control of your air conditioner, allowing you to manage settings such as power, temperature, and scheduling remotely via a dedicated application on your computer, tablet, or smartphone.

This kit is specifically compatible with Friedrich Kuhl and Kuhl+ N-Series models (e.g., xxxxN10, xxxxN30, etc.).

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før installation og drift.
• Ensure the air conditioning unit is powered off and unplugged before installing the KWIFI kit.
• Do not expose the KWIFI kit to water or excessive moisture.
• Håndter komponenterne forsigtigt for at undgå beskadigelse.
• If you encounter any difficulties during installation, contact qualified service personnel or Friedrich customer support.

3. Pakkens indhold

Verify that all items are present in your KWIFI Wi-Fi Kit package:

• KWIFI Wi-Fi Dongle
• FAT-formatted USB Thumb Drive
• Mikro-USB til USB-kabel

4. Opsætning og installation

Follow these steps to install and set up your Friedrich KWIFI Wi-Fi Kit:

1. Forbered klimaanlægget: Ensure your Friedrich Kuhl or Kuhl+ N-Series air conditioner is powered off and unplugged from the electrical outlet.
2. Locate USB Port: Identify the USB port on your air conditioning unit. This is typically located on the front panel or within an accessible compartment.
3. Connect KWIFI Dongle: Insert the KWIFI Wi-Fi Dongle into the USB port of the air conditioner.
4. Tænd enhed: Plug the air conditioner back into the electrical outlet and power it on.
5. Download af software: On a computer, download the necessary software for the KWIFI kit from the official Friedrich webwebsted.
6. Transfer Software: Transfer the downloaded software files to the provided FAT-formatted USB thumb drive.
7. Update Air Conditioner: Insert the USB thumb drive into the air conditioner's USB port (if different from the dongle port, or follow specific instructions for your model to initiate the software update). Follow any on-screen prompts or digital display indicators on the air conditioner to complete the software installation.
8. Registrer enhed: Access the Friedrich Link website or download the Friedrich Link mobile application. Follow the instructions within the platform to register your KWIFI-enabled air conditioner. This typically involves creating an account and pairing your device.
9. Bekræft forbindelsen: Once registered, use the Friedrich Link app to confirm that your air conditioner is online and responsive.

This image displays the Friedrich KWIFI Wi-Fi Kit module. It is a compact, rectangular device, primarily blue in color, featuring the white Friedrich logo prominently on its surface. This module enables wireless control for compatible Friedrich Kuhl and Kuhl+ N-Series air conditioners.

5. Operating the KWIFI Kit

Once installed and configured, the KWIFI kit allows you to control your Friedrich air conditioner remotely:

• Fjernbetjening: Use the Friedrich Link app on your smartphone, tablet, or computer to turn the unit on or off from anywhere with an internet connection.
• Temperaturjustering: Adjust the desired temperature settings remotely.
• Planlægning: Create and manage custom schedules for your air conditioner's operation, optimizing comfort and energy usage.
• Valg af tilstand: Change operating modes (e.g., Cool, Fan, Dry) as supported by your specific air conditioner model.

Note: There may be a short delay (typically 10-30 seconds) between sending a command via the app and the air conditioner responding, depending on network conditions.

6. Vedligeholdelse

The Friedrich KWIFI Wi-Fi Kit requires minimal maintenance. Ensure the dongle remains securely connected to the air conditioner's USB port. Keep the device clean and free from dust. Periodically check the Friedrich website or app for any available firmware updates for the KWIFI kit or the Friedrich Link application to ensure optimal performance and access to new features.

7. Fejlfinding

• Forbindelsesproblemer: If the app shows the unit as offline, check your home Wi-Fi network's stability and signal strength. Ensure the air conditioner is powered on and the KWIFI dongle is properly inserted.
• Kommandoer reagerer ikke: Verify your internet connection on your control device (smartphone, tablet, computer). Close and re-open the Friedrich Link app. Allow a few moments for commands to transmit and for the unit to respond.
• App funktionalitet: Ensure your Friedrich Link app is updated to the latest version. If issues persist, try uninstalling and reinstalling the app.
• Initial Setup Problems: Re-verify all steps in the 'Setup and Installation' section. Ensure the software update to the air conditioner was successful.
• Unit Not Recognized: Confirm that your air conditioner model is an N-Series Kuhl or Kuhl+ unit, as the KWIFI kit is specifically designed for these models.

For persistent issues, refer to the Friedrich support webwebsted eller kontakt kundeservice.

8. Specifikationer

9. Garanti og support

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official Friedrich website. For technical support, troubleshooting assistance, or inquiries about your Friedrich KWIFI Wi-Fi Kit, please contact Friedrich customer service through their official channels.

Friedrich Contact Information:
Besøg venligst www.friedrich.com for supportressourcer og kontaktoplysninger.