1. Introduktion og systemoversigtview
The 3M Versaflo Heavy Industry PAPR Kit TR-300-HIK is a complete Powered Air Purifying Respirator (PAPR) system designed for industrial applications. This system provides combined respiratory, head, eye, and face protection. It is intended for use in environments where particulate hazards are present.
This manual provides instructions for the proper setup, operation, and maintenance of the TR-300-HIK kit to ensure user safety and system performance. Adherence to these instructions is crucial for effective protection.
Figure 1.1: The 3M Versaflo Heavy Industry PAPR Kit TR-300-HIK, showing the hard hat, PAPR unit, breathing tube, and charger.
2. Komponenter inkluderet
The 3M Versaflo Heavy Industry PAPR Kit TR-300-HIK includes the following components:
- M-307 Respiratory Hard Hat Assembly
- TR-306N PAPR Unit
- TR-326 High Durability Belt
- TR-341N Battery Charger
- TR-3712N Filter (HE particulate filter)
- TR-362 Spark Arrestor/Prefilter
- TR-332 High Capacity Battery
- BT-40 Heavy Duty Breathing Tube
- TR-970 Airflow Indicator
Figur 2.1: Detaljeret view of the TR-300-HIK kit components, including the M-307 hard hat, TR-306N PAPR unit, and accessories.
3. Sikkerhedsoplysninger og vigtige meddelelser
Vigtig: 3M's industrielle og erhvervsmæssige produkter er beregnet til, mærket og pakket til salg til uddannede industrielle og erhvervsmæssige kunder til brug på arbejdspladsen. Disse produkter er ikke beregnet til, mærket eller pakket til salg til eller brug af forbrugere (f.eks. til hjemmet, privat brug, folkeskolen eller gymnasiet, fritids-/sportsbrug eller andre anvendelser, der ikke er beskrevet i den relevante produktemballage eller litteratur).
Users must select and use this equipment in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations. The user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.
For assistance with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. For additional product information, visit www.3M.com.
Note: This PAPR system should IKKE be used for painting applications.
4. Opsætningsvejledning
- Oplad batteriet: Connect the TR-332 High Capacity Battery to the TR-341N Battery Charger. Ensure the battery is fully charged before initial use. A full charge typically provides 10-12 hours of operation.
- Install Filter and Prefilter: Insert the TR-3712N Particulate Filter into the TR-306N PAPR Unit. Place the TR-362 Spark Arrestor/Prefilter over the particulate filter to extend its life and protect against sparks.
- Assemble PAPR Unit: Attach the TR-306N PAPR Unit to the TR-326 High Durability Belt. Securely fasten the belt around your waist.
- Connect Breathing Tube: Connect one end of the BT-40 Heavy Duty Breathing Tube to the PAPR unit and the other end to the M-307 Respiratory Hard Hat Assembly. Ensure connections are secure using the Quick Release Swivel (QRS) mechanism.
- Perform Airflow Check: Before each use, perform an airflow check using the TR-970 Airflow Indicator. Turn on the PAPR unit and verify that the indicator ball floats within the specified range, confirming adequate airflow.
Figure 4.1: A user demonstrating the proper wearing of the 3M Versaflo PAPR system, highlighting key features like the breathing tube connection and belt-mounted unit.
5. Betjeningsvejledning
- Donning the System: Place the M-307 Respiratory Hard Hat Assembly on your head and adjust the suspension for a comfortable and secure fit. Ensure the face shield provides clear vision and proper seal.
- Activating the PAPR: Press the power button on the TR-306N PAPR Unit to turn it on. The unit will automatically begin providing filtered air.
- Monitoring Airflow and Battery: The PAPR unit is equipped with automatic flow control and alarms for low battery and low airflow. Pay attention to these indicators during operation. The battery life is approximately 10-12 hours.
- Airflow Distribution: The M-307 hard hat features a two-position adjustable airflow feature, allowing the user to direct air as desired for comfort.
- Højdegrænse: This kit is designed for use at elevations up to 2600 feet above sea level only. Operation above this elevation may affect performance.
- Doffing the System: To remove the system, turn off the PAPR unit, then carefully remove the hard hat and disconnect the breathing tube and belt.
Figur 5.1: Eksamples of protection provided by 3M Versaflo systems, including respiratory, head, eye, and face protection in various industrial settings.
6. Vedligeholdelse
- Rensning: Regularly clean the M-307 Respiratory Hard Hat Assembly, especially the face shield, with a mild soap and water solution. The PAPR unit and breathing tube can be wiped down with a damp cloth. Do not immerse electrical components in water.
- Filterudskiftning: Replace the TR-3712N Particulate Filter when the airflow indicator shows insufficient flow, or as per your company's safety protocols. The spark arrestor/prefilter should be replaced more frequently if it becomes clogged or damaged.
- Batteripleje: Recharge the TR-332 High Capacity Battery after each use or when the low battery alarm activates. Store the battery in a cool, dry place. Avoid fully discharging the battery for extended periods.
- Inspektion: Periodically inspect all components for signs of wear, damage, or degradation. Pay close attention to the breathing tube for cracks or punctures, and the hard hat for structural integrity. Replace damaged components immediately.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Low Airflow Alarm sounds | Clogged filter or prefilter; damaged breathing tube; low battery. | Check and replace filter/prefilter. Inspect breathing tube for damage. Recharge or replace battery. |
| Low Battery Alarm sounds | Batteriet er afladet. | Recharge the TR-332 High Capacity Battery. Ensure charger is functioning correctly. |
| PAPR unit does not turn on | Battery not connected; battery fully discharged; unit malfunction. | Ensure battery is securely connected and charged. If problem persists, contact 3M support. |
| Reduced visibility through face shield | Dirty or scratched face shield. | Clean the face shield. Replace if scratched or damaged. |
8. Specifikationer
- Mærke: 3M
- Modelnummer: TR-300-HIK (Internal Model: 51131173781)
- Headgear Type: M-307 Respiratory Hard Hat Assembly
- PAPR Unit: TR-306N
- Batteritype: TR-332 High Capacity Battery
- Batterilevetid: 10 - 12 hours (approximate)
- Filtertype: TR-3712N Particulate Filter (HE)
- Prefilter/Spark Arrestor: TR-362
- Breathing Tube: BT-40 Heavy Duty Breathing Tube
- Produktdimensioner: 22.6 x 14.4 x 10 tommer
- Varens vægt: 16 ounces (PAPR unit only, approximate)
- Materiale: Leather (belt), various plastics and composites for other components.
- Driftshøjde: Up to 2600 feet above sea level only.
9. Garanti og support
For warranty information, technical support, or to inquire about replacement parts, please contact 3M Customer Service directly. Refer to the official 3M website or the documentation included with your purchase for specific contact details and warranty terms applicable to your region.
It is recommended to register your product with 3M, if applicable, to receive updates and support.