Indledning
The Clore Automotive Pro-Logix PL2310 is a 10-Amp fully-automatic smart charger designed for 6V and 12V battery charging, maintenance, and stable power supply. This versatile unit is engineered to optimally charge and maintain various battery types, including Flooded, AGM, Gel Cell, Spiral Wound, Marine, and Deep Cycle batteries. Its intelligent multi-phase charging process ensures efficient and safe battery care, making it suitable for professional technicians and enthusiasts alike.
Nøglefunktioner
- Charge and Maintain 6V and 12V Batteries: Supports both 6-volt and 12-volt battery systems.
- 2/6/10 Amp Gebyrsatser: Offers selectable charge rates for added versatility, adapting to different battery sizes and charging needs.
- Fuldautomatisk drift: Simplifies the charging process by automatically detecting battery type and condition, then applying the optimal charging routine.
- Advanced Multi-Phase Charging Process: Utilizes a proprietary multi-stage charging algorithm for optimal battery health and longevity.
- Stable Power Supply Mode: Provides a continuous power output (up to 10 amps for PL2310) to maintain system voltage, ideal for vehicle diagnostics, programming, or preventing battery drain during extended accessory use.
- Temperaturkompensation: Automatically adjusts charging parameters based on ambient temperature, ensuring optimal charging performance in extreme hot or cold conditions (from -22°F to 113°F).
- Battery Desulfation: Features a mode to activate desulfation if battery sulfation is detected, helping to restore battery capacity.
- Soft Start Mode: Protects deeply discharged batteries from initial charge stress.
- Exercising Feature: Introduces a load on the battery to simulate active use, then recharges it, helping to maintain optimum battery condition during storage.
Opsætning
1. Indledende inspektion
Before use, inspect the charger and its cables for any signs of damage. Ensure all connections are clean and free of corrosion. The unit features integrated cord and clamp opbevaring for nemheds skyld.
Figur 1: Øverst view of the Clore Automotive PL2310 Smart Charger, showing the control panel and status center.
2. Connecting to Battery
- Sørg for, at opladeren er taget ud af stikkontakten.
- Tilslut den røde positive (+) clamp til den positive (+) pol på batteriet.
- Tilslut den sorte negative (-) clamp til den negative (-) pol på batteriet.
- For vehicle batteries, connect the negative clamp to a non-painted metal part of the vehicle chassis away from the battery and fuel lines.
3. Tænder
Når batteriet clamps are securely connected, plug the charger's AC power cord into a suitable electrical outlet. The charger will power on and begin its initial energizing mode.
Betjeningsvejledning
Charging Modes and Rates
The PL2310 offers various settings to optimize charging for different battery types and conditions. Use the "VOLTS" button to select between 6V, 12V, or Power Supply mode. Use the "TYPE" button to select Standard, AGM, or LiFePO4 battery types. Use the "RATE" button to select the desired charge rate: 2A, 6A, or 10A.
Figure 2: The PL2310 supports various battery types including AGM, Deep Cycle, Flooded, Lithium (LiFePO4), Spiral Wound, and Marine batteries.
Multi-Phase Charging Process
The charger employs a proprietary multi-stage charging process designed to optimally charge and maintain batteries. This process includes several phases:
- Phase 1: Energizing - The charger determines the best charging path for the connected battery. This may involve a soft start mode for deeply discharged batteries to protect them from initial charge stress.
- Phase 2: Fast Charge - In most cases, the charger enters this stage to rapidly charge the battery.
- Phase 3: Absorption - The charging current decreases as the battery approaches full charge.
- Phase 4: Completion - The battery is brought to full charge.
- Phase 5: Resting - Once fully charged, the charger's output is virtually turned off, only occasionally monitoring battery condition. This reduces chemical reaction within the battery, extending its lifespan compared to traditional maintenance modes.
- Phase 6: Exercising - The charger introduces a controlled load on the battery to simulate active use. This feature helps maintain the battery's optimum condition, especially during long-term storage.
- Phase 7: Restoring - After the exercising phase, the battery is recharged to full capacity.
Figure 3: The PL2310 features automatic temperature compensation, adjusting to extreme temperatures from -22°F to 113°F.
Strømforsyningstilstand
In Power Supply (PS) mode, the charger provides a steady power output (up to 10 amps for the PL2310) with the goal of maintaining a stable system voltage of 14.1V DC. This is useful for preventing battery drain when performing vehicle diagnostics or programming that requires continuous power without drawing from the vehicle's battery.
Figure 4: The stable power supply feature helps maintain vehicle voltage during repair or diagnostic procedures.
Statusindikatorer
The Status Center on the charger provides clear indications of the charging process:
- Opladning i gang: Angiver, at batteriet aktivt oplades.
- Opladning fuldført: Illuminates when the battery has reached full charge.
- Polaritet: Lights up if the battery clamps are connected with incorrect polarity. Disconnect and re-connect correctly.
- Fejl: Indicates an issue with the battery or charging process, such as a short circuit or unsafe battery conditions.
Figure 5: The status center clearly displays "Charging in Progress" or "Charging Complete".
Figure 6: The charger can force charge deeply discharged batteries down to 0.0 volts.
Opretholdelse
Almen pleje
Keep the charger clean and dry. Wipe down the exterior with a soft, damp cloth. Ensure the cooling fan vents are clear of obstructions to prevent overheating. Regularly inspect cables and clampfor slitage eller skader.
Opbevaring
Store the charger in a cool, dry place when not in use. Utilize the integrated cord and clamp storage features to keep cables organized and prevent damage. For long-term battery storage, the charger's maintenance modes (including the exercising feature) help keep batteries in optimal condition.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren tænder ikke. | No AC power, loose connection. | Check AC outlet, ensure power cord is fully plugged in. |
| "Polarity" indicator is lit. | Forkert batteri CLamp forbindelse. | Disconnect charger from AC, then re-connect red clamp til positiv (+) og sort clamp til negativ (-). |
| "Error" indicator is lit. | Battery fault (e.g., shorted cell) or unsafe condition. | Disconnect charger. Inspect battery for damage. If battery is severely damaged, it may not be chargeable. |
| Batteriet oplades ikke. | Battery is deeply discharged (below 0.0V) or severely sulfated. | The charger has a soft start and desulfation mode for these conditions. Allow the charger to attempt to recover the battery. If it fails, the battery may be beyond recovery. |
Note: The PL2310 is a charger and maintainer, not a jump starter. It will not provide enough current to start a vehicle with a completely dead battery.
Specifikationer
- Model: PL2310
- Mærke: Clore Automotive
- Fabrikant: SOLAR
- Input bindtage: 120V AC
- Udgang Voltage: 6V / 12V DC
- Gebyrsatser: 2A, 6A, 10A
- Strømforsyningsudgang: Up to 10A continuous at 14.1V DC
- Kompatible batterityper: Flooded, AGM, Gel Cell, Spiral Wound, Marine, Deep Cycle, LiFePO4
- Varens vægt: 3.9 pund
- Produktdimensioner: 9.4 x 8 x 4.5 tommer
- Temperaturkompensation: Yes (-22°F to 113°F)
Garanti og support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Clore Automotive webwebstedet. Behold din købskvittering som købsbevis.
