1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Intermatic WG157010D 110V Pool Timer Motor. Please read these instructions thoroughly before proceeding with installation or use. Retain this manual for future reference.
2. Sikkerhedsoplysninger
ADVARSEL: Risk of electric shock. This product must be installed by a qualified electrician in accordance with all national and local electrical codes. Disconnect power at the circuit breaker or fuse box before installing or servicing this motor.
- Sørg for, at strømforsyningen passer til motorens voluminiumsstyrketage-klassificering (110V).
- Do not operate the motor if it is damaged.
- Keep children away from electrical equipment.
- All wiring connections must be secure and properly insulated.
3. Produktet er slutview
The Intermatic WG157010D is a replacement motor designed for use in Intermatic pool and spa timers. It provides the necessary mechanical drive to advance the timer mechanism, ensuring accurate scheduling of pool equipment operation.
Figure 1: Intermatic WG157010D 110V Pool Timer Motor. This image displays the Intermatic WG157010D 110V Pool Timer Motor. It features a compact metallic housing with visible internal gears and two white electrical wires extending from one end, each terminated with a ring terminal for connection.
4. Opsætning og installation
This motor is intended as a direct replacement for existing Intermatic timer motors. Always ensure the replacement motor matches the voltage and specifications of the original motor.
- Strømafbrydelse: Before beginning any work, turn off all power to the pool timer at the main circuit breaker. Verify power is off using a voltage tester.
- Access Timer Enclosure: Open the timer enclosure door. Depending on your specific timer model, you may need a screwdriver to remove screws securing the cover.
- Identify and Disconnect Old Motor: Locate the existing timer motor. Note how it is mounted and connected. Carefully disconnect the two electrical wires from the old motor. You may need to loosen terminal screws.
- Fjern den gamle motor: Unmount the old motor from its position. It is typically held in place by screws or clips.
- Installer ny motor: Position the new Intermatic WG157010D motor in the same location as the old one. Secure it using the appropriate screws or clips. Ensure the motor's shaft properly engages with the timer's gear mechanism.
- Wire New Motor: Connect the two white electrical wires of the new motor to the corresponding terminals in the timer. Ensure connections are tight and secure. Refer to your specific timer's wiring diagram if unsure.
- Luk indhegning: Carefully close and secure the timer enclosure door.
- Gendan strøm: Tænd for strømmen igen ved hovedafbryderen.
- Test drift: Observe the timer to ensure the motor is functioning correctly and advancing the timer mechanism.
If you are unsure about any step, consult a qualified electrician or pool technician.
5. Betjeningsvejledning
The WG157010D is a motor component of a larger timer system. Its operation is integrated with the timer's overall function. Once installed, the motor continuously drives the timer mechanism as long as power is supplied to it, allowing the timer to accurately track time and activate/deactivate connected pool equipment according to its set schedule.
- Ensure the timer's clock face is set to the correct time after installation.
- Verify that the ON/OFF trippers (if applicable to your timer model) are correctly positioned for your desired schedule.
- The motor operates silently; a lack of movement on the timer's clock face or an incorrect schedule indicates a potential issue.
6. Vedligeholdelse
The Intermatic WG157010D motor is designed for long-term, maintenance-free operation. However, periodic checks of the overall timer system are recommended.
- Visuel inspektion: Periodically inspect the timer enclosure for signs of moisture, insect intrusion, or physical damage.
- Ledningsforbindelser: Ensure all electrical connections remain tight and free from corrosion. (Always disconnect power before inspecting wiring.)
- Renhed: Keep the timer enclosure clean and free of debris.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Timer clock not advancing. | No power to the timer; faulty motor; gears jammed. | Check circuit breaker. Verify wiring connections. If power is present, the motor may need replacement. Inspect for obstructions in gears. |
| Timer making unusual noise. | Motor malfunction; foreign object in gears. | Disconnect power and inspect the motor and gears for obstructions. If noise persists, the motor may be failing and require replacement. |
| Timer not switching equipment ON/OFF at set times. | Incorrect tripper settings; timer clock not advancing (see above). | Verify tripper positions. Ensure the timer clock is advancing correctly. |
For issues not listed here, or if troubleshooting steps do not resolve the problem, contact Intermatic customer support or a qualified technician.
8. Specifikationer
- Model: WG157010D
- Voltage: 110V
- Type: Pool Timer Motor
- Mærke: Intermatic
- Pakkedimensioner: 6 x 6 x 6 tommer
- ASIN: B007OGVADE
- UPC: 852673946488
9. Garanti og support
Intermatic products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty statement included with your original timer unit or visit the official Intermatic website. For technical support or replacement parts, please contact Intermatic customer service directly.
Du kan finde mere information og kontaktoplysninger på Intermatic Brand Store on Amazon.
