Clore Automotive PL2320 20-Amp Brugsanvisning til fuldautomatisk smartoplader

1. Introduktion

The Clore Automotive PL2320 Pro-Logix Smart Charger is designed for professional technicians, offering fully automatic operation and compatibility with multiple battery types. This intelligent unit provides fast charging, battery repair, maintenance, and long-term storage charging. It also features a stable power supply mode for various applications. The PL2320 is suitable for virtually any lead-acid battery type, including Flooded, AGM, Gel Cell, Spiral Wound, Marine, and Deep Cycle batteries.

2. Nøglefunktioner

• 6V and 12V Battery Compatibility: Charges and maintains both 6-volt and 12-volt batteries.
• Versatile Charge Rates: Offers 2, 10, and 20 Amp charge rates for various charging needs.
• Fuldautomatisk drift: Simplifies the charging process with intelligent, automated functions.
• Advanced Multi-Phase Charging: Utilizes a sophisticated charging process for optimal battery health and longevity.
• Stabil strømforsyningstilstand: Provides consistent power to maintain system voltage, ideal for on-vehicle repairs and diagnostics.
• Temperaturkompensation: Automatically adjusts charging parameters based on ambient temperature for efficient and safe operation in extreme conditions (up to 113°F and as low as -22°F).
• Battery Type Versatility: Capable of charging Flooded, AGM, Gel Cell, Spiral Wound, Marine, and Deep Cycle batteries.

3. Hvad er der i æsken

• 1 x Clore Automotive PL2320 6/12V Battery Charger/Maintainer - 20 Amp

4. Vigtige sikkerhedsoplysninger

Always read and understand the entire instruction manual before operating the charger. Failure to follow safety instructions can result in electric shock, fire, explosion, or serious injury.

• Elektrisk kompatibilitet: This unit is designed for 120V AC outlets ONLY. Using it with incompatible voltage (e.g., 220-240V) can cause severe damage to the unit and pose a fire hazard. Verify your power supply before use.
• Ventilation: Ensure adequate ventilation during charging. Batteries can produce explosive gases. Do not charge in a confined area.
• Forebyggelse af gnister: Avoid creating sparks near the battery. Connect and disconnect charger leads only when the charger is unplugged from the AC outlet.
• Polaritet: Tilslut altid den positive (røde) polamp to the positive battery terminal and the negative (black) clamp to the negative battery terminal or a grounded chassis point away from the battery.
• Beskadiget enhed: Do not operate the charger if it has been dropped, damaged, or shows signs of malfunction (e.g., smoke, burning smell). Immediately unplug and discontinue use if such issues occur.
• Børn og kæledyr: Opbevar opladeren og batteriet utilgængeligt for børn og kæledyr.
• Forlængerledninger: If an extension cord is necessary, ensure it is in good condition and of adequate gauge to prevent voltage drop og overophedning.

5. Opsætning

1. Klargør batteriet: Ensure battery terminals are clean and free of corrosion. If charging a flooded battery, check fluid levels and add distilled water if necessary.
2. Connect Charger to Battery:
   • Tilslut RØD positiv (+) clamp til den positive (+) batteripol.
   • Tilslut SORT negativ (-) clamp to the negative (-) battery terminal or to the vehicle chassis away from the battery.
3. Connect Charger to AC Power: Plug the charger's AC cord into a standard 120V AC electrical outlet. The charger will automatically begin its diagnostic and charging sequence.

Figure 1: Clore Automotive PL2320 Smart Charger connected to a battery.

6. Betjeningsvejledning

6.1. Automatisk opladningsproces

The PL2320 is a fully automatic charger. Once connected to the battery and power, it will:

1. Analyze Battery: Opladeren vil automatisk registrere batterivolumentage (6V or 12V) and type (Flooded, AGM, Gel, etc.).
2. Select Charge Rate: It will determine the optimal charge rate (2A, 10A, or 20A) based on battery condition.
3. Multi-Phase Charging: The charger employs an advanced multi-phase charging process to energize, soft start, bulk charge, absorb, and maintain the battery.
4. Statusindikatorer: The front panel display will show the charging status:
   • Opladning i gang: (Orange indicator) The battery is actively being charged.
   • Opladning fuldført: (Green indicator) The battery is fully charged and the charger has switched to maintenance mode.
5. Temperaturkompensation: The charger automatically adjusts its output based on ambient temperature to ensure optimal charging performance and prevent over/undercharging.

Figure 2: Charger display showing charging status.

6.2. Strømforsyningstilstand

The Power Supply Mode provides a stable voltage output, essential for maintaining vehicle system voltage during diagnostic work, module programming, or other on-vehicle repairs. This prevents voltage drops that could disrupt sensitive electronic systems.

• To activate Power Supply Mode, refer to the specific instructions in the full user manual.
• Ensure the vehicle's electrical load does not exceed the charger's maximum output in this mode.

Figure 3: Charger in Power Supply Mode.

6.3. Valg af batteritype

The charger automatically identifies the battery type. However, you can manually select specific battery types if needed. The PL2320 supports:

• Flooded (Standard)
• AGM (absorberet glasmåtte)
• Gelcelle
• Lithium (LiFePO4 Compatible)
• Deep Cycle
• Spiral Wound
• Marine batterier

Figure 4: Charger compatibility with various battery types.

7. Vedligeholdelse

Korrekt vedligeholdelse sikrer din opladeres levetid og optimale ydeevne.

• Rensning: Disconnect the charger from power and the battery. Wipe the case and cables with a damp klæde. Brug ikke opløsningsmidler eller slibende rengøringsmidler.
• Opbevaring: Opbevar opladeren et køligt og tørt sted, når den ikke er i brug. Sørg for, at kablerne er pænt oprullet for at forhindre skader.
• Batteriterminaler: Hold batteripolerne rene og fri for korrosion for effektiv opladning.

8. Fejlfinding

If you encounter issues with your PL2320 charger, refer to the following common problems and solutions:

• Charger Not Starting/Error Light: If the charger does not begin charging or displays an ERROR light, check the following:
  • Ensure proper connection of clamps to battery terminals (positive to positive, negative to negative/chassis).
  • Verify the AC power outlet is functional.
  • The battery may be severely discharged (below 3-4V). Some smart chargers may not initiate charging on extremely low voltage batteries. In such cases, a brief jump-start or connection to a 'dumb' charger for a few minutes might raise the voltage enough for the smart charger to recognize it.
  • The battery may be defective (e.g., shorted cell, heavily sulfated beyond repair). The charger's diagnostics will prevent charging of a faulty battery.
• Langsom opladning: Ensure the correct charge rate is selected for the battery size. Larger batteries require longer charging times.
• Overophedning: If the charger feels excessively hot, ensure it is in a well-ventilated area and not covered.

9. Specifikationer

10. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the official Clore Automotive website or contact their customer service directly. Always retain your proof of purchase for warranty claims.

• Fabrikant: SOLAR
• Kundeservice: Se producentens webhjemmeside for de seneste kontaktoplysninger.