Sunlite TL-L200 Griplite Tail Light Instruction Manual

Indledning

Thank you for choosing the Sunlite TL-L200 Griplite Tail Light. This manual provides essential information for the proper installation, operation, and maintenance of your new tail light. Designed for enhanced visibility and safety, this light features bright LEDs and a durable, water-resistant silicone body. Please read this manual thoroughly before use and retain it for future reference.

Sikkerhedsoplysninger

Sørg altid for, at baglygten er forsvarligt monteret, inden du kører.
Do not look directly into the LED light as it may cause temporary vision impairment.
While the light is water-resistant, avoid prolonged submersion.
Regularly check battery life to ensure consistent performance.
This light is intended to increase visibility to others; it does not replace the need for safe riding practices.

Pakkens indhold

Bekræft at alle varer er til stede i pakken:

1 x Sunlite TL-L200 Griplite Tail Light
2 x CR2032 Lithium Batteries (pre-installed)

Opsætning

Battery Installation (If not pre-installed or for replacement)

Gently open the silicone casing for at få adgang til batterirummet.
Insert two CR2032 lithium batteries, ensuring correct polarity (+/-).
Close the silicone casing securely to maintain water resistance.

Mounting the Tail Light

The Sunlite Griplite Tail Light features an integrated silicone mounting strap for versatile attachment.

Identify a suitable mounting location on your bicycle, such as the seat post, seat stay, or rear rack. Ensure the light will be visible from the rear.
Wrap the integrated silicone strap around the desired mounting point.
Hook the end of the strap onto the designated tab on the light's body, pulling it taut to secure the light firmly in place.
Adjust the light's angle to ensure optimal visibility.

Sunlite TL-L200 Griplite Tail Light mounted on a bicycle seat post

Image: The Sunlite TL-L200 Griplite Tail Light securely mounted on a bicycle seat post, demonstrating its flexible silicone strap attachment.

Betjeningsvejledning

The Sunlite TL-L200 Griplite Tail Light operates with a simple one-button control located on the top of the light.

Sunlite TL-L200 Griplite Tail Light showing the power button

Billede: Forside view of the Sunlite TL-L200 Griplite Tail Light, highlighting the prominent power button on its top surface.

Tænd/sluk: Press the button once to turn the light on. Press and hold the button for approximately 2 seconds to turn the light off.
Skift tilstande: With the light on, press the button repeatedly to cycle through the available lighting modes:
- Konstant tilstand: Provides a continuous beam of red light for constant visibility.
- Blinkende tilstand: Emits a pulsating red light, designed to attract attention and enhance safety.

Sunlite TL-L200 Griplite Tail Light emitting red light in the dark

Image: The Sunlite TL-L200 Griplite Tail Light illuminated in a dark environment, demonstrating its bright red light output and visibility.

Opretholdelse

Rensning

To clean your tail light, wipe the silicone body and lens with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material or lens.

Udskiftning af batteri

When the light appears dim or stops functioning, it's time to replace the batteries. Refer to the "Battery Installation" section under "Setup" for detailed instructions. Always use two new CR2032 lithium batteries for optimal performance.

Fejlfinding

Problem	Mulig årsag	Løsning
Lyset tændes ikke.	Døde batterier eller forkert batteriinstallation.	Udskift batterierne med nye CR2032-celler, og sørg for at polariteten vender korrekt.
Lyset er svagt.	Lav batteristrøm.	Udskift batterierne.
Lyse flimrer.	Løs batteriforbindelse eller lav batteristrøm.	Kontroller batterirummet for korrekt fastgørelse; udskift batterierne om nødvendigt.
Light falls off during ride.	Forkert montering.	Ensure the silicone strap is pulled taut and securely hooked onto the tab.

Specifikationer

Model: Sunlite TL-L200 Griplite Tail Light (Part Number: 97525)
Lyskilde: 2 x Bright Nichia LEDs
Strømkilde: 2 x CR2032 Lithium Batteries (included)
Køretid: Op til 100 timer (afhængigt af tilstand og batterikvalitet)
Tilstande: 1 Steady, 1 Flashing
Materiale: Water-resistant Silicone Body
Monteringstype: Integrated Silicone Strap (Seat Mount)
Varens vægt: Cirka 0.94 pund
Dimensioner (LxBxH): Cirka 4.7 x 3.25 x 1.45 tommer
Vandmodstandsniveau: Vandtæt
UPC: 072774975259

Garanti og support

Sunlite products are manufactured to high standards. For specific warranty information or technical support, please refer to the product packaging or visit the official Sunlite webwebstedet. Behold din købskvittering som købsbevis.

For further assistance, please contact Sunlite customer service through their official channels.

	Installationsvejledning til Sunlite loftlampe Instruktioner til installation af en Sunlite loftlampe, inklusive sikkerhedsforanstaltninger, generelle retningslinjer og en liste over dele til montering.
	Installationsvejledning til Sunlite LED T-gitterarmatur \| Model 88789-SU Omfattende installationsvejledning til Sunlite LED T-gitterlampen (model 88789-SU). Lær, hvordan du installerer og tilslutter din lineære T-gitterlampe sikkert.
	Sunlite LED T8 rørformet Lamp Installationsvejledning til eftermontering Trinvise installationsvejledninger til Sunlites LED T8 rørformede lamp eftermontering. Inkluderer sikkerhedsadvarsler, ledningsdiagrammer for enkelt- og flerlitersamps og vigtige opsætningsoplysninger.
	Installationsvejledning til Sunlite LED-panellampe Omfattende installationsvejledning til Sunlite LED-baggrundsbelyste panelarmaturer til indbygning, der dækker loft-, ophængs- og overflademonteringsmetoder. Indeholder vejledning i ledningsføring og instruktioner til justering af watt.tage og farvetemperatur.
	Sunlite 55159 LED lysdæmper installationsvejledning Detaljerede installationsvejledninger til Sunlite 55159 LED-dæmper, kompatibel med 0-10V dæmpbare strømforsyninger og belysningsarmaturer. Indeholder advarsler, dele, værktøjer, ledningsdiagrammer til enkeltpolede og 3-vejs opsætninger, installationstrin, test og fejlfinding.
	SP65BE SPI RGB+1CH PWM enkeltfarvet LED-controller instruktioner Brugermanual til Sunlite SP65BE SPI RGB+1CH PWM Single Color LED-controlleren. Dækker funktioner, app-integration med Mi Home og BanlanX, 2.4G fjernbetjening, tekniske specifikationer, indikatorlamper og ledningsføringsinstruktioner.

Sunlite TL-L200