Indledning
This manual provides essential instructions for the installation, operation, and maintenance of your Klipsch R-5650-W II In-Wall Speaker. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your speaker.
The Klipsch R-5650-W II is designed for high-quality audio reproduction in architectural settings, suitable for both home theater and stereo music applications.
Vigtige sikkerhedsinstruktioner
- Læs disse instruktioner.
- Gem disse instruktioner.
- Overhold alle advarsler.
- Følg alle instruktioner.
- Brug ikke dette apparat i nærheden af vand.
- Rengør kun med en tør klud.
- Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
ADVARSEL: Dette produkt indeholder kemikalier, der af staten Californien er kendt for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, besøg venligst www.P65Warnings.ca.gov.
Opsætning og installation
Valg af placering
The Klipsch R-5650-W II is designed for in-wall installation. Consider the following when selecting a location:
- Ensure adequate clearance from wall studs. The mounting tabs require space to extend.
- Avoid installing near electrical wiring, plumbing, or HVAC ducts.
- For optimal sound dispersion, consider the listening area and the speaker's pivoting tweeter.
- The speaker is designed for indoor use. It is not waterproof.
Værktøj påkrævet
- Blyant
- Målebånd
- Stud Finder
- Gipsvægssav eller hobbykniv
- Trådstrippere
- Screwdriver (manual recommended to avoid over-tightening)
- Speaker Wire (appropriate gauge for length of run)
Installationstrin
- Forbered væggen: Use a stud finder to locate wall studs. Position the speaker template (usually included with the product) in the desired location, ensuring it avoids studs and has sufficient clearance for the mounting tabs.
- Trace and Cut: Trace the outline of the template onto the wall. Carefully cut the opening using a drywall saw or utility knife.
- Træk højttalerledning: Før højttalerkablet fra din amplifier/receiver to the wall opening. Ensure proper polarity (+ to + and - to -) throughout the entire audio system.
- Tilslut højttalerledning: Strip approximately 1/2 inch of insulation from the ends of the speaker wire. Connect the wires to the speaker's binding posts, ensuring a secure connection and correct polarity.
- Monter højttaleren: Insert the speaker into the cut-out. Tighten the mounting screws (usually located on the front baffle) with a screwdriver. This will cause the mounting tabs to rotate outwards and clamp onto the drywall. Do not overtighten.
- Fastgør gitter: The magnetic grille can now be attached to the speaker frame. It should snap into place securely and flush with the wall surface.
Image: Klipsch R-5650-W II In-Wall Speaker without grille, revealing the internal components including the 6.5-inch Cerametallic woofer and the 1-inch Titanium dome compression driver mated to a Tractrix Horn.
Image: Klipsch R-5650-W II In-Wall Speaker with a partial view of the magnetic grille being attached, illustrating the flush-mount design.
Image: The white magnetic grille for the Klipsch R-5650-W II In-Wall Speaker, designed to blend seamlessly with most wall finishes.
Betjeningsvejledning
Indledende opstart
Once the speaker is installed and wired to your amplifier/receiver, ensure all connections are secure. Power on your audio system and gradually increase the volume to a low level to confirm sound output.
Justering af lydindstillinger
The R-5650-W II features treble and midbass attenuation switches, typically located on the speaker baffle behind the grille. These switches allow for fine-tuning the sound to match your room acoustics and personal preference.
- Treble Attenuation: Adjusts the high-frequency output. Use to reduce brightness in acoustically live rooms or to increase clarity in damped environments.
- Midbass Attenuation: Adjusts the mid-range and bass output. Use to compensate for room modes or to integrate better with a subwoofer.
Experiment with these settings while listening to various audio content to find the optimal balance for your setup.
Pivoterende tweeter
The Tractrix Horn tweeter can be pivoted to direct high frequencies towards the primary listening area. Gently adjust the tweeter assembly to aim the sound for improved imaging and soundstage.
Opretholdelse
The Klipsch R-5650-W II In-Wall Speaker requires minimal maintenance.
- Rensning: Dust the speaker grille and frame periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Grille Painting (Optional): If you wish to paint the grille to match your wall color, remove it from the speaker. Use a fine-mist spray paint and apply several thin coats to avoid clogging the perforations. Ensure the paint is fully dry before reattaching.
- Inspektion: Periodically check speaker wire connections for tightness and ensure the speaker remains securely mounted in the wall.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra højttaleren |
|
|
| Forvrænget eller uklar lyd |
|
|
| Sound is too bright or dull |
|
|
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | R-5650-W II |
| Højttaler type | In-Wall højttaler |
| Bashøjttaler diameter | 6.5 Inches Cerametallic |
| Tweeter | 1-inch Titanium dome compression driver mated to 4-inch square 90° x 60° Tractrix Horn (Pivoting) |
| Impedans | 8 Ohm |
| Højttaler Maksimal udgangseffekt | 100 watt |
| Produktmål (D x B x H) | 3.75" D x 9.4" B x 14.3" H |
| Varens vægt | 0.01 ounce (Bemærk: Denne vægt ser ud til at være en dataindtastningsfejl. Se produktemballagen for den nøjagtige vægt.) |
| Farve | Hvid |
| Monteringstype | Vægmontering |
| Forbindelsesteknologi | Kablet |
| Anbefalede anvendelser | Home theater or stereo music applications (Indoor) |
| Inkluderede komponenter | Audio Speaker, Magnetic Grille |
| UPC | 743878023992 |
Garantioplysninger
For detailed warranty information regarding your Klipsch R-5650-W II In-Wall Speaker, please refer to the warranty card included with your product or visit the official Klipsch webGarantibetingelserne kan variere afhængigt af region og forhandler.
Support og kontakt
If you require further assistance or have questions not covered in this manual, please contact Klipsch customer support.
- Officiel brugermanual (PDF): For en downloadbar version af brugermanualen, besøg venligst: Klipsch R-5650-W II User Manual PDF
- Klipsch Officiel Webwebsted: www.klipsch.com
- Klipsch Store on Amazon: Visit the Klipsch Store
