Eheim 6664

Eheim 6664 Prefilter Instruction Manual

Brand: Eheim | Model: 6664

1. Produktet er slutview

The Eheim 6664 Prefilter is designed to enhance the filtration efficiency of your external aquarium filter by trapping coarse dirt particles before they reach the main filter. This helps to prevent premature clogging, extending the lifespan of your primary filter media and reducing maintenance frequency.

It features an all-round suction design for gentle tank filtration and consists of two filter baskets with dedicated aquarium filter cartridges.

Eheim 6664 Prefilter assembled

Figure 1: Assembled Eheim 6664 Prefilter, showing its compact design and two filter sections.

2. Opsætningsvejledning

2.1 Udpakning

2.2 Installation

The Eheim 6664 Prefilter is designed to be installed on the suction side of your external aquarium filter, replacing the existing strainer.

  1. Turn off and unplug your external aquarium filter.
  2. Carefully remove the existing strainer from the intake tube inside your aquarium.
  3. Ensure the Eheim prefilter's internal sponges are correctly seated within its two sections.
  4. Connect the top section of the Eheim 6664 Prefilter to the end of your external filter's intake tube. It should fit snugly.
  5. Position the prefilter in your aquarium, ensuring it is fully submerged and stable.
  6. Once installed, you may restart your external filter.
Eheim 6664 Prefilter components

Figure 2: Eheim 6664 Prefilter showing its two separable sections, ready for installation or maintenance.

3. Betjening

The Eheim 6664 Prefilter operates passively as water is drawn into your external filter. Its design allows for water to enter from all sides, providing comprehensive mechanical filtration. The internal sponges capture larger debris and particulate matter, preventing them from entering and clogging your main filter media.

4. Vedligeholdelse

4.1 Cleaning the Prefilter

Regular cleaning of the prefilter is essential to maintain optimal flow and filtration efficiency. The frequency of cleaning will depend on your aquarium's bioload and debris levels, but typically every few days to once a week is recommended.

  1. Turn off your external aquarium filter.
  2. Carefully remove the Eheim prefilter from the intake tube while it is still submerged in the aquarium to minimize mess.
  3. Press the grey button on the side of the prefilter to separate the two filter baskets.
  4. Remove the white filter sponges from each basket.
  5. Rinse the sponges thoroughly in a bucket of old aquarium water (water removed during a water change) to preserve beneficial bacteria. Avoid using tap water directly, as chlorine can harm beneficial bacteria.
  6. Clean the plastic filter baskets of any accumulated debris.
  7. Reinsert the clean sponges into their respective baskets.
  8. Reassemble the prefilter by aligning the two sections and pressing them together until they click securely.
  9. Reattach the prefilter to the intake tube in your aquarium.
  10. Restart your external filter.

4.2 Udskiftning af filtermedie

While the sponges are designed for long-term use and can be rinsed repeatedly, they may eventually degrade or become too saturated with fine particles to clean effectively. Replacement sponges are available from Eheim. Replace them following the cleaning steps above, simply substituting old sponges with new ones.

5. Fejlfinding

ProblemMulig årsagLøsning
Reduced water flow from external filterPrefilter sponges are clogged with debris.Clean the prefilter sponges as described in Section 4.1.
Prefilter detaches from intake tubeImproper connection or tube size incompatibility.Ensure the prefilter is securely attached to the intake tube. Verify compatibility with your filter's intake tube diameter.
Water remains cloudy despite prefilter usePrefilter is for coarse debris; main filter or other issues.Ensure your main filter is functioning correctly and its media is clean. Check water parameters and consider other causes of cloudiness (e.g., bacterial bloom, fine particulates).

6. Specifikationer

7. Garanti og support

For information regarding warranty coverage, product support, or to purchase replacement parts, please contact Eheim customer service directly or visit their official webwebsted. Gem din købsbevis til garantikrav.

Eheim is known for its quality products and customer support. For the most up-to-date contact information, please refer to the Eheim official webwebstedet eller emballagen til dit produkt.

Relaterede dokumenter - 6664

Preview EHEIM aquaclass Bedienungsanleitung
Umfassende Bedienungsanleitung für die EHEIM aquaclass Aquarien-Kombination, einschließlich Einrichtung, Betrieb og Wartung. Erfahren Sie alles über Installation, Beleuchtung und Pflege.
Preview EHEIM professionel 4 Aquarium Außenfilter Bedienungsanleitung
Umfassende Bedienungsanleitung for die EHEIM professionel 4 Serie af Außenfiltern for Aquarien, Modele 800 (Typ 2277) og 600 T (Typ 2375). Erfahren Sie mehr über Installation, Betrieb, Wartung und Fehlerbehebung.
Preview EHEIM LEDcontrol+ 4200140: Präzise Aquarienbeleuchtungssteuerung
Entdecken Sie das EHEIM LEDcontrol+ (Modell 4200140), en fortschrittliches Steuergerät zur individuelle Programmering af Lichtfarbe og Helligkeit Ihrer Aquarienbeleuchtung. Ideel til EHEIM powerLED+ Leuchten.
Preview EHEIM professionel 4+ og 5e Eksterne Akvariefiltre - Brugermanual
Omfattende brugermanual til EHEIM professionel 4+ og 5e-serien af ​​eksterne akvariefiltre, der dækker opsætning, betjening, vedligeholdelse, fejlfinding og sikkerhedsinstruktioner. Indeholder detaljeret vejledning i komponentidentifikation, tilslutning, idriftsættelse, betjening af termofilter og systemmeddelelser.
Preview EHEIM RGBcontrol+ Bedienungsanleitung
Dette dokument indeholder betjeningsvejledninger, sikkerhedsoplysninger, installationsvejledninger og tekniske specifikationer for EHEIM RGBcontrol+-enheden, der er designet til præcis styring af RGB-belysningssystemer til akvarier.
Preview EHEIM ControlCenter & Interface Brugermanual - Optimer dit akvariefilter
Detaljeret guide til EHEIM professionel 3e akvariefiltre. Lær at installere og bruge EHEIM ControlCenter-softwaren og USB-interfacet til avanceret kontrol, programmering, opdateringer og fejlfinding. Dækker modellerne 2074, 2076, 2078.