1. Introduktion
This manual provides essential instructions for the safe and efficient use of your Icom BC-160 Rapid Charger. Please read this manual thoroughly before using the charger to ensure proper operation and to prevent damage to the unit or connected devices.
Nøglefunktioner:
- Rapid charging capability for compatible Icom batteries.
- Genuine Icom accessory, ensuring compatibility and performance.
- Designed for use with various Icom two-way radios.
2. Sikkerhedsoplysninger
Always observe the following safety precautions to avoid electric shock, fire, or personal injury:
- Use only the specified Icom AC adapter with this charger. Using an unauthorized adapter may cause damage or fire.
- Do not disassemble or modify the charger. Unauthorized modifications can lead to electric shock or fire.
- Keep the charger away from water and moisture. Do not operate with wet hands.
- Brug ikke opladeren, hvis kablet eller stikket er beskadiget.
- Sørg for ordentlig ventilation omkring opladeren under drift.
- Do not charge batteries other than those specified by Icom for this charger.
- Tag opladeren ud af stikkontakten, når den ikke er i brug, eller før rengøring.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- Icom BC-160 Rapid Charger Base
- AC Adapter (Power Supply)
Image: The Icom BC-160 Rapid Charger includes the charging base and its accompanying AC power adapter, both in black.
4. Opsætning
- Tilslut AC-adapteren: Insert the DC plug from the AC adapter into the DC input jack located on the back of the BC-160 charger base.
- Sæt i stikkontakten: Plug the AC adapter into a standard wall power outlet.
- Placering: Place the charger on a stable, flat surface, ensuring adequate ventilation.
5. Betjeningsvejledning
To charge a compatible Icom battery pack:
- Insert Battery/Radio: Carefully slide the battery pack (or the radio with the battery pack attached) into the charging slot of the BC-160 charger base. Ensure the contacts on the battery align with the contacts in the charger.
- Opladningsindikator: The charging indicator LED on the charger base will illuminate, typically red, to indicate that charging is in progress.
- Opladning fuldført: Once the battery is fully charged, the indicator LED will change color (e.g., green) or turn off, depending on the specific battery and charger model. Refer to your radio's battery manual for exact indicator behavior.
- Remove Battery/Radio: Once charging is complete, remove the battery pack or radio from the charger.
Note: Charging times may vary depending on the battery capacity and its current charge level.
6. Vedligeholdelse
- Rensning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Opbevaring: Opbevar opladeren et køligt og tørt sted, når den ikke er i brug. Undgå ekstreme temperaturer og direkte sollys.
- Kontaktpunkter: Periodically check the charging contacts on both the charger and the battery for dirt or corrosion. Clean gently with a dry cotton swab if necessary.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladerens indikatorlampe lyser ikke. |
|
|
| Battery does not charge fully or takes too long. |
|
|
8. Specifikationer
| Modelnummer | BC160 |
| Mærke | ICOM |
| Input bindtage | 240 Volts (AC Adapter dependent) |
| Varens vægt | 12 ounces (approximately 0.75 lbs) |
| Pakkedimensioner | 5.2 x 4.6 x 4.1 tommer |
| Farve | Sort |
| Fabrikant | ICOM |
Bemærk: Specifikationerne kan ændres uden varsel med henblik på produktforbedring.
9. Garanti og support
Specific warranty details for the Icom BC-160 Rapid Charger are not provided within this manual. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Icom webwebsted.
You can typically find support information on the manufacturer's webwebsted:
