Bogen Classic C10 Amplivligere brugervejledning

1. Produktet er slutview

The Bogen Classic Series C10 Amplifier is designed to provide dependable audio performance and flexibility for various applications. This model is rated at 10 watts RMS output power and is UL and CSA listed, ensuring compliance with safety standards. It features discreet complementary transistor circuitry for maximum reliability of its power output stages.

C10 amplifier is part of a series that includes models with music-on-hold (MOH) output capabilities, though the C10 specifically focuses on amplification. It offers screw terminal connections for 600 Ohm 1 volt and 8 Ohm at 1 watt, along with a rear panel level control for easy adjustment.

Figur 1: Forside view of the Bogen Classic C10 Amplifier, showing the main controls and branding.

2. Funktioner

• RMS udgangseffekt: 10 Watts, suitable for various audio setups.
• Frekvensrespons: Wide range from 70 Hz to 16 kHz for clear audio reproduction.
• Lav forvrængning: Total Harmonic Distortion (THD) of 1% ensures high-fidelity sound.
• Robust Circuitry: Designed with discreet complementary transistor circuitry for enhanced reliability.
• Fleksible forbindelser: Screw terminal connections for 600 Ohm 1 volt and 8 Ohm 1 watt outputs.
• Adjustable Level Control: Conveniently located on the rear panel for output level management.
• Treble Equalizer: Built-in equalizer mode for treble adjustment.
• Sikkerhedscertificeret: UL and CSA listed for assured safety and quality.

3. Sikkerhedsoplysninger

Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.

• Strømkilde: Tilslut amplifier only to the type of power source indicated on the marking label.
• Ventilation: Sørg for tilstrækkelig ventilation. Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Vand og fugt: Do not expose this apparatus to rain or moisture. Do not use near water.
• Varme: Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Service: Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
• Rensning: Tag dette produkt ud af stikkontakten før rengøring. Brug ikke flydende rengøringsmidler eller aerosolrens. Brug annonceamp klud til rengøring.

4. Pakkens indhold

Upon opening the package, verify that all components are present and in good condition. The standard package for the Bogen Classic C10 Amplifier typically includes:

• Bogen Classic C10 Amplifier enhed
• Strømledning
• Brugervejledning (dette dokument)

If any items are missing or damaged, please contact your dealer or Bogen customer support immediately.

5. Opsætning

Follow these steps to set up your Bogen Classic C10 Amplivligere:

1. Placering: Placer amplifier on a stable, flat surface with adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
2. Højttalerforbindelser: Connect your speakers to the appropriate screw terminals on the rear panel. The C10 supports 8 Ohm at 1 watt speaker connections. Ensure correct polarity (+ to + and - to -) for optimal sound.
3. Indgangsforbindelser: Tilslut din lydkilde (f.eks. mixer, forforstærker)amplifier) to the input terminals. The amplifier provides screw terminal connections for 600 Ohm 1 volt input sources.
4. Strømtilslutning: Sørg for amplifier's power switch is in the OFF position. Connect the power cord to the amplifier's power inlet, then plug the other end into a suitable AC power outlet.
5. Indledende indstillinger: Before powering on, ensure all volume/level controls on the amplifier are set to their minimum position to prevent sudden loud sounds.

6. Betjeningsvejledning

Når ampNår liferen er konfigureret, skal du følge disse trin for betjening:

1. Tænd: Flip the power switch on the front panel to the ON position. The power indicator light should illuminate.
2. Adjust Input Source: Ensure your audio source is playing.
3. Adjust Level Control: Slowly increase the level control knob on the rear panel until the desired output volume is achieved. Avoid setting the level too high, which can cause distortion.
4. Diskantjustering: Use the treble equalizer control to fine-tune the high-frequency response of your audio.
5. Sluk: When finished, turn the level control down, then flip the power switch to the OFF position.

7. Vedligeholdelse

Proper maintenance ensures the longevity and optimal performance of your Bogen Classic C10 Amplivligere.

• Rensning: Rengør regelmæssigt ydersiden af amplifier with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the unit is unplugged and completely dry before reconnecting power. Do not use harsh chemicals or abrasive cleaners.
• Ventilation: Periodically check that the ventilation openings are free from dust and debris. Use a soft brush or compressed air to clear any blockages.
• Opbevaring: Hvis du opbevarer amplifier for an extended period, ensure it is kept in a cool, dry place, away from direct sunlight and extreme temperatures.
• Kabelinspektion: Periodically inspect all connected cables (power, input, speaker) for any signs of wear, fraying, or damage. Replace damaged cables immediately.

8. Fejlfinding

If you encounter issues with your Bogen Classic C10 Amplifier, se følgende fejlfindingsvejledning:

If the problem persists after trying these solutions, please contact Bogen customer support or a qualified service technician.

9. Specifikationer

10. Garanti og support

Bogen Communications International, Inc. provides a limited warranty for its products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen webwebsted.

For technical support, service, or inquiries regarding your Bogen Classic C10 Amplifier, please contact Bogen customer support through their official channels. Have your model number (BG-C10) and serial number (if applicable) ready when contacting support.

Online ressourcer: For additional information, FAQs, and product updates, visit the official Bogen webwebsted.