Woods 50012WD udendørs 24-timers mekanisk timer brugermanual

1. Introduktion

Thank you for choosing the Woods 50012WD Outdoor 24-Hour Mechanical Timer. This device is designed to automate the operation of outdoor electrical appliances and lighting, providing convenience and energy savings. Its heavy-duty construction and weatherproof housing make it suitable for various outdoor applications. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

2. Sikkerhedsoplysninger

WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:

• Læs alle instruktioner: Understand the product's operation before use.
• Kun udendørs brug: This timer is designed for outdoor applications. Ensure it is protected from direct water spray and submerged conditions.
• Grounded outlets: Sæt altid timeren i en jordet stikkontakt med 3 ben. Fjern ikke jordstikket.
• Overbelast ikke: Ensure the total load of connected devices does not exceed the timer's maximum ratings (15 Amps, 1875 Watts, 3/4 HP).
• Hold børn væk: Lad ikke børn betjene denne enhed.
• Afbryd strømmen: Tag altid timeren ud af stikkontakten, før du udfører vedligeholdelse eller rengøring.
• Undersøg for skader: Do not use if the timer, cord, or plug is damaged.

3. Produktet er slutview

Komponenter

• Timeropkald: A rotating dial marked with 24 hours (12 AM/PM).
• Programnåle: Small, push-down pins around the timer dial for setting ON/OFF times. Each pin represents 30 minutes.
• Mode Switch: A slide switch to select between 'Timer' operation (clock icon) or 'Always ON' (I icon).
• Jordede stikkontakter: To 3-bens stikkontakter til tilslutning af enheder.
• Strømledning: A 12-inch cord with a grounded plug to connect to a power source.
• Vejrbestandigt hus: A protective cover designed to shield the internal components from outdoor elements.

Funktioner

• Op til 24 tænd/sluk-indstillinger pr. dag.
• Programmable in 30-minute intervals.
• Settings repeat daily.
• Controls heavy-duty appliances up to 3/4 HP.
• Two grounded outlets for multiple devices.
• Weatherproof housing for outdoor protection.

Image 1: The Woods 50012WD Outdoor 24-Hour Mechanical Timer, showing its compact design, power cord, and two grounded outlets.

4. Opsætningsvejledning

1. Pak timeren ud: Carefully remove the timer from its packaging and inspect it for any signs of damage.
2. Initial Pin Setting: The timer is shipped with all program pins in the 'ON' (down) position. Before setting your desired program, pull ALLE the pins around the dial to the 'UP' (OFF) position. This ensures a clean slate for programming.
3. Indstil aktuel tid: Rotate the timer dial clockwise until the 'TIME NOW' arrow aligns with the current time of day. Ensure you distinguish between AM and PM hours (e.g., 3 PM is 15 on the dial).
4. Program TIL/FRA-tider: Push down the pins corresponding to the time periods you want your connected device to be 'ON'. Each pin represents a 30-minute interval. For example, to turn a device ON from 6:00 PM to 10:00 PM, push down the pins from 18:00 to 22:00.
5. Vælg driftstilstand: Slide the mode switch to the 'Timer' position (indicated by a clock icon) for programmed operation. If you wish for the connected devices to be continuously powered, slide the switch to the 'I' (Always ON) position.
6. Placering: Position the timer in a location where its outlets are easily accessible and the unit is protected from direct heavy rain or standing water. The weatherproof housing offers protection from general outdoor elements.

Billede 2: Nærbillede view of the timer dial, illustrating the program pins and the mode switch for setting ON/OFF times.

5. Betjeningsvejledning

1. Tilslut timeren: Insert the timer's power cord into a grounded 120V outdoor electrical outlet.
2. Tilslut enheder: Plug your outdoor appliances or lighting into the two grounded outlets on the timer. Ensure the total wattage og amperage do not exceed the timer's specifications.
3. Bekræft drift: The timer dial will begin to rotate once plugged in. If the mode switch is set to 'Timer', your connected devices will turn ON and OFF according to your programmed pins.
4. Manuel tilsidesættelse: If you need to temporarily override the timer settings, slide the mode switch to the 'I' (Always ON) position. The timer will continue to keep time, but the outlets will remain continuously powered. To resume programmed operation, slide the switch back to the 'Timer' position.
5. Power Outage: I tilfælde af en magt outage, the timer will stop. Once power is restored, you will need to manually reset the current time on the dial to ensure accurate programming.

6. Vedligeholdelse

• Rensning: Frakobl timeren fra strømkilden før rengøring. Tør ydersiden af ​​med en blød, tør klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Inspektion: Periodically inspect the power cord, plug, and timer housing for any signs of wear, damage, or corrosion. Replace the unit if any damage is found.
• Opbevaring: Når timeren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information or technical support regarding your Woods 50012WD Outdoor 24-Hour Mechanical Timer, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Coleman Cable

For yderligere hjælp, besøg Woods Store on Amazon.