Indledning
This manual provides essential information for the proper installation, operation, and maintenance of your Wagner 3057KX Miniature Lamp. Please read these instructions carefully before proceeding with installation to ensure safe and effective use. This lamp is designed for specific automotive lighting applications.
Sikkerhedsoplysninger
- Always disconnect the vehicle's battery or ensure the ignition is off before attempting any electrical work to prevent electrical shock or damage to the vehicle's electrical system.
- Allow the old bulb to cool down completely before handling, as it may be hot and cause burns.
- Brug passende personlige værnemidler, såsom handsker og øjenbeskyttelse, under installationen.
- Avoid touching the glass portion of the new bulb with bare hands. Oils from your skin can create hot spots and reduce bulb life. Use a clean cloth or glove if handling the glass directly.
- Ensure the replacement bulb matches the specifications of the original bulb to prevent electrical issues or improper lighting performance.
Opsætning og installation
The Wagner 3057KX Miniature Lamp is designed for direct replacement in compatible automotive applications. Installation typically involves accessing the bulb housing, removing the old bulb, and inserting the new one.
- Identificér pærens placering: Consult your vehicle's owner's manual to locate the specific lamp assembly (e.g., turn signal, brake light, parking light) that uses the 3057KX bulb.
- Adgang til pæren: Depending on your vehicle, this may involve opening the hood, trunk, or removing a tail light assembly. Follow your vehicle's specific instructions for access.
- Fjern den gamle pære: Carefully twist or pull the bulb socket from the housing. Once the socket is out, gently press and twist (if applicable) or pull the old bulb straight out of the socket.
- Indsæt den nye pære: Align the base of the Wagner 3057KX bulb with the socket. Push the bulb firmly into the socket and twist if necessary until it is securely seated. Remember to avoid touching the glass with bare hands.
- Test pæren: Before reassembling, turn on your vehicle's ignition and test the function of the newly installed lamp (e.g., turn on headlights, activate turn signal, press brake pedal).
- Saml igen: Once confirmed working, reinsert the bulb socket into the housing and secure any covers or assemblies removed during the process.
Billede 1: Forside view of the Wagner 3057KX Miniature Lamp, showing the clear glass bulb and black plastic base with 'WAGNER 12 V 3057KX' printed on it. This image illustrates the general appearance of the product.
Image 2: Size comparison of the Wagner 3057KX Miniature Lamp held in a hand, indicating a height of approximately 2.0 inches (5 cm). This image provides a visual reference for the bulb's compact dimensions.
If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified automotive technician.
Drift
Once properly installed, the Wagner 3057KX Miniature Lamp operates automatically as part of your vehicle's electrical system. Its function will correspond to the specific application it is installed in (e.g., illuminating when the turn signal is activated, brake pedal is pressed, or parking lights are on).
Opretholdelse
The Wagner 3057KX Miniature Lamp is a sealed unit and requires no routine maintenance. Its lifespan is dependent on usage and vehicle electrical system conditions. If the lamp ceases to function, it should be replaced with a new Wagner 3057KX bulb following the installation steps outlined above.
Fejlfinding
- Pæren lyser ikke:
- Sørg for, at pæren sidder korrekt i fatningen.
- Check the vehicle's fuse box for a blown fuse related to the specific lighting circuit. Replace if necessary.
- Inspect the bulb socket for corrosion or damage. Clean or replace the socket if issues are found.
- Verify that the correct bulb type (3057KX) has been installed.
- Bulb Flickers or is Dim:
- This could indicate a loose connection in the socket or a failing bulb. Re-seat the bulb or replace it.
- Tjek for voltage irregularities in the vehicle's electrical system.
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte en professionel biltekniker.
Specifikationer
| Mærke | Wagner |
| Modelnummer | 3057KX |
| Vare Pakke Antal | 1 |
| Auto del position | Rear (Common application, verify with vehicle manual) |
| Varens vægt | 3.06 ounce |
| Produktdimensioner | 1.2 x 3 x 7.3 tommer |
| UPC | 042723943059 |
Garanti og support
For information regarding product warranty or technical support, please refer to the official Wagner website or contact Wagner customer service directly. Keep your purchase receipt as proof of purchase.
Official Wagner Webwebsted: Visit the Wagner Store on Amazon
