1. Introduktion
The Detex ECL-230D is a robust and reliable emergency door alarmed panic exit device designed for use on wood, hollow metal, and aluminum doors. This device provides security for secondary exits by sounding a 100-decibel alarm upon unauthorized exit, helping to prevent theft and ensure compliance with safety codes. It features a durable deadbolt, a steel plate, and a photoluminescent emergency sign for visibility in low-light conditions. The alarm is powered by a 9-volt battery and can only be reset with a control key.
2. Sikkerhedsoplysninger
- Always ensure proper installation by qualified personnel to guarantee optimal performance and safety compliance.
- Regularly test the alarm function to confirm it is operating correctly.
- Replace the 9-volt battery annually or as needed to maintain alarm functionality.
- Ensure the control key is kept in a secure location and accessible only to authorized personnel.
- This device is designed for emergency exit use. Unauthorized use may trigger the alarm.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Detex ECL-230D Emergency Door Exit Alarm unit
- 9 volt batteri
- Mounting hardware (machine and sheet metal screws)
- Emergency Exit sign
- Kontroltaster
4. Opsætning og installation
4.1 Krav til døren
- Door Thickness: 1-¾ inches to 2-¼ inches
- Door Width: 20 inches to 36 inches
- Stile Maximum: 5-¾ inches (with ECL-437K strike, standard)
- Stile Minimum: 1-⅞ inches (with ECL-475 Kit, decorative backplate kit)
4.2 Cylinder Requirements
The ECL-230D requires at least one rim cylinder (sold separately). If operation from both sides of the door is desired, two rim cylinders are necessary. The device accepts 5-pin through 7-pin standard and interchangeable core rim cylinders. For 6 or 7-pin cylinders, the ECL-1595 cylinder collar is required.
4.3 Montering
The Detex ECL-230D is non-handed, meaning it can be flipped over to accommodate either left-hand or right-hand door installations. Use the provided machine and sheet metal screws for secure mounting. Refer to the detailed installation template included with your product for precise drilling and mounting instructions.
5. Betjeningsvejledning
5.1 Til- og frakobling
The alarm system is armed and disarmed by unlocking and locking the deadbolt using the control key. Inserting the key and turning it to the 'LOCK' position arms the alarm. Turning the key to the 'UNLOCK' position disarms the alarm and allows the door to be opened without triggering the alarm.
5.2 Alarmfunktion
When the device is armed, opening the door will trigger a loud 100-decibel alarm. This alarm will continue to sound until it is reset using the control key. The alarm is powered by the included 9-volt battery.
5.3 Emergency Sign
The integrated photoluminescent emergency sign absorbs ambient light and glows in the dark when the lights are out or dimmed. This ensures that the emergency exit is clearly visible and identifiable under various lighting conditions, enhancing safety.
6. Vedligeholdelse
6.1 Udskiftning af batteri
The ECL-230D alarm is powered by a single 9-volt battery. It is recommended to replace the battery annually or immediately if the alarm sounds weak or fails to activate. To replace, disarm the unit, open the cover, remove the old battery, and insert a new 9-volt battery, ensuring correct polarity. Close the cover securely.
6.2 Rengøring
Clean the exterior of the alarm unit with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or internal components. The lock body is corrosion resistant, requiring minimal specialized cleaning.
7. Fejlfinding
- Alarmen lyder ikke: Check the 9-volt battery. Ensure it is properly installed and has sufficient charge. Verify the unit is armed (key in 'LOCK' position).
- Alarm Sounds Weak: Udskift 9-volts batteriet med et nyt.
- Key Not Operating Smoothly: Apply a small amount of graphite lubricant to the key and cylinder. Do not use oil-based lubricants.
- Døren lukker ikke ordentligt: Inspect the strike plate alignment and ensure the deadbolt extends fully into the strike. Adjust if necessary.
- Falske alarmer: Ensure the door is fully closed and latched before arming. Check for any obstructions preventing the door from closing completely.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | ECL-230D |
| Dimensioner | 19.1 x 4 x 6.8 tommer |
| Vægt | 9 pund |
| Strømkilde | 1 x 9V batteri (medfølger) |
| Alarm Decibel Level | 100 dB |
| Deadbolt Throw | 1 inch, saw resistant |
| Dørtykkelseskompatibilitet | 1-¾” to 2-¼” |
| Door Width Compatibility | 20" til 36" |
| Cylinder Compatibility | 5-pin through 7-pin standard and interchangeable core rim cylinders |
| ADA-kompatibel | Ja |
9. Garantioplysninger
For specific warranty details regarding your Detex ECL-230D Emergency Door Exit Alarm, please refer to the warranty card included with your product packaging or visit the official Detex webGarantibetingelserne dækker typisk fabrikationsfejl under normale brugsforhold.
10. Support
If you require further assistance, have questions about installation, operation, or troubleshooting that are not covered in this manual, please contact Detex customer support. You can find contact information on the official Detex webwebstedet eller gennem dit produkts dokumentation.
