1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Jensen HDS3000 Weatherproof Heavy Duty Dual Cone Surface-Mount Speakers. Please read this manual thoroughly before attempting to install or operate the speakers to ensure proper function and longevity. Retain this manual for future reference.
2. Sikkerhedsoplysninger
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
- Do not expose speakers to extreme temperatures or direct flame.
- Always disconnect power from the audio system before making any electrical connections.
- Undgå langvarig lytning ved høj lydstyrke for at forhindre høreskader.
- When drilling mounting holes, verify there are no electrical wires, fuel lines, or other critical components behind the surface.
3. Pakkens indhold
Bekræft, at din pakke indeholder følgende varer:
- Two (2) Jensen HDS3000 Surface-Mount Speakers
- Mounting Hardware (screws, brackets if applicable)
- Denne brugsanvisning
4. Opsætning og installation
4.1 Montering af højttalerne
The Jensen HDS3000 speakers are designed for surface mounting. Choose a flat, stable location that can support the weight of the speakers and allows for proper sound dispersion. Ensure the mounting surface is free from obstructions.
- Position the speaker in the desired mounting location.
- Mark the locations for the mounting screws using the speaker's base as a template.
- Drill pilot holes at the marked locations. Ensure the drill bit size is appropriate for the mounting screws to prevent stripping or cracking the surface.
- Secure the speaker to the mounting surface using the provided hardware. Do not overtighten the screws.
Figure 1: Jensen HDS3000 Weatherproof Surface-Mount Speakers. These speakers are designed for robust outdoor and marine environments.
4.2 Ledningsforbindelser
Connect the speakers to your audio system's amplifier or head unit. Observe proper polarity to ensure optimal sound performance.
- Identify the positive (+) and negative (-) terminals on both the speaker and your audio source.
- Connect the positive (+) wire from the speaker to the positive (+) output of your ampkølemiddel/hovedenhed.
- Connect the negative (-) wire from the speaker to the negative (-) output of your ampkølemiddel/hovedenhed.
- Ensure all connections are tight and free from corrosion. Use marine-grade connectors if installing in a wet environment.
5. Betjening
Once properly installed and wired, your Jensen HDS3000 speakers will function as part of your audio system. Turn on your audio source (e.g., stereo, receiver) and adjust the volume to your desired listening level. These speakers are designed for a nominal impedance of 4 Ohms and a maximum power handling of 60 watts.
6. Vedligeholdelse
To ensure the longevity and performance of your weatherproof speakers, follow these maintenance guidelines:
- Rensning: Periodically wipe the speaker grilles and enclosures with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish or weatherproof seals.
- Inspektion: Regularly check all mounting hardware and wiring connections for tightness and signs of corrosion or wear. Tighten any loose screws and replace damaged wiring as needed.
- Miljøeksponering: While designed to be weatherproof, prolonged exposure to direct sunlight, extreme temperatures, or harsh marine conditions can affect the lifespan. Consider covering the speakers when not in use for extended periods in such environments.
7. Fejlfinding
If you experience issues with your speakers, consult the following table before contacting support:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra højttalerne |
|
|
| Forvrænget eller dårlig lydkvalitet |
|
|
| Kun én højttaler virker |
|
|
8. Specifikationer
The following are the technical specifications for the Jensen HDS3000 speakers:
| Modelnavn | HDS3000 |
| Højttaler type | Dual Cone, Surface Mount |
| Max effekthåndtering | 60 watt |
| RMS-strøm | 30 watt |
| Nominel impedans | 4 Ohm |
| Sensitivity @ 1W/1 Meter | 89 dB |
| Frekvensrespons | 90-15,000 Hz |
| Materiale | Polypropylene (Woofer Cone) |
| Farve | Sort |
| Overall Dimensions (each) | 11.3D x 17W x 12.1H Centimetres (6.69" x 4.76" x 4.43") |
| Varens vægt (par) | 2.2 Kilograms (4.8 Lbs) |
| Særlige funktioner | Durable, Weatherproof |
9. Garanti og support
Jensen products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Jensen website. For technical support or service inquiries, please contact Jensen customer service through their official channels.
Bemærk: Produktspecifikationer og design kan ændres uden varsel.
