Indledning
Welcome to the world of Mega Bloks! This instruction manual provides detailed guidance for assembling and enjoying your Mega Bloks Oscorp Spider Lab. This set allows you to recreate the iconic scene where Peter Parker gains his spider powers and transforms into Spider-Man.
The set includes a buildable Oscorp Spider Lab compartment, a biting spider, a web trap, and a Spider-Man micro action figure with interchangeable heads.
Vigtige sikkerhedsoplysninger
- Kvælningsfare: Dette legetøj indeholder små dele og er ikke egnet til børn under 3 år.
- Voksenopsyn anbefales under samling og leg.
- Hold emballagematerialer væk fra børn for at forhindre kvælning.
- Undersøg alle dele for skader før montering. Brug ikke beskadigede dele.
Pakkens indhold
Your Mega Bloks Oscorp Spider Lab set includes 182 stk. Please verify that all components are present before beginning assembly.
- Buildable Oscorp Spider Lab structure
- Spider Lab compartment
- One (1) biting spider figure
- En (1) web fælde
- One (1) Spider-Man micro action figure with interchangeable masked and unmasked heads
- Assorted building blocks and accessories (totaling 182 pieces)
Image: Complete Mega Bloks Oscorp Spider Lab set, showing the assembled lab, the Spider-Man figure, and the red spider.
Monteringsvejledning
Follow the numbered steps below to assemble your Oscorp Spider Lab. Refer to the included visual guide for detailed piece identification and placement.
- Udpak komponenter: Carefully remove all pieces from the packaging. Sort pieces by color and size to facilitate assembly.
- Build the Main Lab Structure: Begin by constructing the base of the Oscorp Spider Lab. Connect the larger blue and white base plates as indicated in the visual guide.
- Assemble the Spider Lab Compartment: Attach the transparent blue wall panels and the web trap mechanism to the main structure. Ensure the web trap can open and close smoothly.
- Construct the Observation Tower: Build the tall blue tower with the rotating top piece. Attach the display screens showing the Spider-Man silhouette and the spider symbol.
- Integrate Accessories: Place the yellow and red scientific equipment pieces onto the designated studs on the lab structure.
- Prepare the Spider Figure: The red biting spider figure is pre-assembled. It can be placed within the web fælde.
- Assemble the Spider-Man Figure: The micro action figure comes with interchangeable heads. To transform Peter Parker into Spider-Man, simply remove the unmasked head and attach the masked Spider-Man head.
Image: The assembled Oscorp Spider Lab, showing the spider placed within the web fælde.
Image: The assembled Oscorp Spider Lab, featuring the Peter Parker micro action figure.
Image: A visual representation of how to interchange the heads on the micro action figure to transform Peter Parker into Spider-Man.
Betjenings- og spilleinstruktioner
Once assembled, the Oscorp Spider Lab is ready for imaginative play. Here are some ways to interact with your set:
- Recreate the Transformation: Place the Peter Parker figure near the spider lab compartment. Position the biting spider within the web trap. Simulate Peter's encounter with the spider, then swap his head for the Spider-Man mask to show his transformation.
- Web Trap Action: Use the mechanism to open and close the web trap, capturing or releasing the spider figure.
- Lab Exploration: Utilize the various lab components and the observation tower as part of your storytelling.
- Udskiftelige hoveder: Easily switch between Peter Parker's unmasked head and Spider-Man's masked head to depict his dual identity.
Opretholdelse
To ensure the longevity of your Mega Bloks Oscorp Spider Lab, follow these simple maintenance guidelines:
- Rensning: Wipe down the blocks and figures with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Opbevar sættet et rent, tørt sted væk fra direkte sollys og ekstreme temperaturer for at forhindre vridning eller misfarvning.
- Håndtering: Handle the pieces gently, especially the smaller components and the interchangeable heads, to avoid breakage.
Fejlfinding
If you encounter any issues with your Mega Bloks Oscorp Spider Lab, please refer to the following common solutions:
| Problem | Løsning |
|---|---|
| Manglende dele ved åbning. | Carefully check all packaging materials. If pieces are still missing, contact Mega Brands customer support (see Support section). |
| Blocks do not connect securely. | Ensure blocks are aligned correctly and apply firm, even pressure. Check for any debris in the studs or holes. |
| Figure heads are difficult to swap. | Gently twist and pull to remove. Align the peg with the hole and push firmly to attach. Avoid excessive force. |
Specifikationer
| Modelnummer: | 91330 |
| Mærke: | Mega-mærker |
| Antal stykker: | 182 |
| Materiale Type: | Plast |
| Farve: | Blå |
| Produktmål (LxBxH): | 20.32 x 5.08 x 27.94 cm (8 x 2 x 11 tommer) |
| Varens vægt: | 322.05 g (0.71 lbs) |
| Montering påkrævet: | Ja |
| Batterier påkrævet: | Ingen |
| Anbefalet alder: | 6 - 15 år |
Garanti og support
Specific warranty information for the Mega Bloks Oscorp Spider Lab (Model 91330u) is typically provided with the product packaging or can be found on the official Mega Brands webwebsted. Gem venligst din købsbevis i tilfælde af garantikrav.
For further assistance, missing parts, or product inquiries, please contact Mega Brands customer support directly. Contact information can usually be found on the product packaging or their official webwebsted.
Note: As per the provided product data, specific warranty details were not available. Please refer to the manufacturer's official resources.
