Ashley Leo Panel Bed Full - Instruction Manual

1. Introduktion

Tak for købetasing the Ashley Leo Panel Bed Full. This manual provides detailed instructions for the safe assembly, proper usage, and effective maintenance of your new bed. Please read all instructions carefully before beginning assembly and keep this manual for future reference.

Image 1.1: The fully assembled Ashley Leo Panel Bed Full, featuring its distinctive blue finish and panel design, ready for use in a bedroom environment.

2. Sikkerhedsoplysninger

Følg altid disse sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• Opbevar al hardware og små dele utilgængeligt for børn.
• Assemble the bed on a soft, clean surface (e.g., carpet or blanket) to prevent scratching.
• Sørg for, at alle bolte og skruer er forsvarligt spændt før brug. Kontroller med jævne mellemrum og efterspænd efter behov.
• Brug ikke elværktøj til montering, medmindre det specifikt er angivet, da dette kan overspænde og beskadige komponenterne.
• Do not stand on or jump on the bed frame.
• Use only the mattress size recommended for a full-size bed.

3. Reservedelsliste

Før monteringen påbegyndes, skal du kontrollere, at alle dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, må du ikke fortsætte monteringen. Kontakt kundesupport for at få hjælp.

• Sengegavl (1)
• Fodplade (1)
• Sideskinner (2)
• Center Support Legs (2-3, quantity may vary)
• Slats (Multiple, quantity may vary)
• Hardwarepakke (bolte, skiver, møtrikker, unbrakonøgle)

4. Opsætning og montering

Assembly typically requires two adults. Please follow these steps in order:

1. Udpak komponenter: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Identify each component using the parts list.
2. Fastgør sideskinner til hovedgærde: Align one side rail with the pre-drilled holes on the headboard. Insert the appropriate bolts and washers, and loosely tighten with the Allen wrench. Repeat for the second side rail.
3. Fastgør sideskinner til fodbræt: Carefully lift the footboard and align it with the open ends of the side rails. Insert the remaining bolts and washers, and loosely tighten.
4. Spænd alle forbindelser: Once all four corners are connected, go back and securely tighten all bolts using the Allen wrench. Do not overtighten.
5. Installer midterste støtteben (hvis relevant): If your bed frame includes center support legs, attach them to the designated crossbar or slat support beam according to the diagrams provided in your specific hardware pack. Ensure they are firmly attached and provide stable support.
6. Placer lameller: Lay the wooden slats across the side rails, ensuring they are evenly spaced and secured if there are pre-drilled holes or attachment points. Some slats may require screwing into the side rails for added stability.
7. Endelig kontrol: Before placing the mattress, gently shake the frame to ensure it is stable and all connections are secure.

5. Brug og pleje

To ensure the longevity and appearance of your Leo Panel Bed, follow these guidelines:

• Madrasskompatibilitet: Use a standard full-size mattress. A box spring may or may not be required depending on the mattress type and personal preference; check your mattress manufacturer's recommendations.
• Vægtfordeling: Distribute weight evenly across the bed surface. Avoid concentrating heavy loads in one small area.
• Rensning: Støv regelmæssigt med en blød, tør klud. Tør straks spild af med en klud.amp cloth and dry thoroughly. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
• Flytning af sengen: When moving the bed, always lift it rather than dragging it to prevent damage to the frame and your flooring.

6. Vedligeholdelse

Regular maintenance will help preserve your bed's condition:

• Hardwarekontrol: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary, but do not overtighten.
• Lamelleinspektion: Inspect the wooden slats for any signs of cracking or damage. Replace any damaged slats immediately to maintain proper mattress support.
• Overfladebeskyttelse: If placing items on the headboard or footboard, use felt pads or coasters to prevent scratches.

7. Fejlfinding

Hvis du støder på problemer med din seng, kan du se følgende almindelige problemer og løsninger:

• Knirkende lyde:
  • Check all bolts and screws for tightness. Loose connections are a common cause of squeaking.
  • Ensure slats are properly seated and not rubbing against the side rails.
  • Verify that the center support legs (if present) are firmly on the floor and not wobbly.
• Sengen føles ustabil/vaklende:
  • Spænd alt monteringsudstyr igen.
  • Ensure the bed is on a level surface. If not, use shims under the legs to stabilize.
  • Confirm that all parts are correctly assembled according to the instructions.
• Damaged Finish:
  • For minor scratches, touch-up pens or furniture markers matching the blue finish may be used.
  • For significant damage, contact customer support for repair options or professional advice.

8. Specifikationer

9. Garanti og support

Ashley Furniture stands behind the quality of its products. For specific warranty information regarding your Leo Panel Bed Full, please refer to the warranty card included with your purchase or visit the official Ashley Furniture webGarantibetingelserne dækker typisk fabrikationsfejl i en begrænset periode fra købsdatoen.

For customer support, missing parts, or assembly assistance, please contact Ashley Furniture Customer Service:

• Webwebsted: www.ashleyfurniture.com
• Telefon: Refer to the Ashley Furniture webhjemmeside for de seneste kontaktnumre.
• E-mail: Refer to the Ashley Furniture website for customer service email options.

When contacting support, please have your model number (B005VHJHE2) and date of purchase readily available.