Teknetics T2LTD-BLK Special Edition Metal Detector User Manual

Indledning

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Teknetics T2LTD-BLK Special Edition Metal Detector. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

The Teknetics T2LTD-BLK is designed for advanced metal detection, offering exceptional depth and speed for coin shooting and relic hunting. It features dual DD search coils (5-inch and 11-inch) and trigger-actuated pinpointing for precise target location.

Vigtige sikkerhedsoplysninger

• Always exercise caution when digging to avoid underground utilities or hazardous objects.
• Do not operate the detector in thunderstorms or severe weather conditions.
• Keep the control housing dry. The search coils are waterproof, but the control housing is not.
• Brug kun anbefalede batterier.
• This device is heavy and may cause strain or injury if not handled properly. Maintain proper posture and take breaks during extended use.

Produktkomponenter

Your Teknetics T2LTD-BLK package includes the following main components:

• Control Housing with Display
• Øvre Stængel
• Nedre Stængel
• Armlæn
• 11-inch DD Waterproof Search Coil
• 5-inch DD Waterproof Search Coil
• Coil Mounting Bolt and Washers

Image: Teknetics T2LTD-BLK Metal Detector with both 5-inch and 11-inch DD coils. This image shows the complete metal detector assembly, including the control unit, shaft, armrest, and both the larger 11-inch DD search coil and the smaller 5-inch DD search coil.

Opsætning og montering

1. Fastgør søgespolen:

   Secure the desired search coil (11-inch or 5-inch DD) to the lower stem using the provided non-metallic bolt and washers. Ensure it is snug but do not overtighten.

2. Assemble the Stems:

   Insert the lower stem into the upper stem. Adjust the length to a comfortable position for your height, ensuring the search coil is parallel to the ground when held naturally.

3. Monter kontrolhuset:

   Slide the control housing onto the upper stem. The armrest should be positioned to support your forearm comfortably.
4. Tilslut spolekablet:

   Wrap the search coil cable securely around the stem, leaving enough slack for coil movement. Plug the connector into the receptacle on the control housing. Ensure the connection is firm.

5. Installer batterier:

   The T2LTD-BLK requires 4 AA batteries. Open the battery compartment on the control housing and insert the batteries, observing proper polarity. Close the compartment securely.

Billede: Nærbillede view of the Teknetics T2LTD-BLK control panel. This image highlights the digital display, showing target ID, sensitivity, discrimination settings, and battery indicator. The control knob and menu button are also visible.

Betjeningsvejledning

Tænd/sluk

To power on the detector, press and hold the MENU button. To power off, press and hold the MENU button again until the display turns off.

Grundlæggende driftstilstande

• All Metal Mode: Detects all types of metal. Ideal for finding deeply buried targets or when the target material is unknown.
• Discrimination Mode: Allows the user to filter out unwanted metals (e.g., iron) and focus on specific target types.

Nøgleindstillinger

• Følsomhed: Adjusts the detector's ability to detect targets. Higher sensitivity increases depth but can also increase false signals in mineralized ground.
• Discrimination Level: Sets the rejection level for unwanted metals. Higher levels reject more ferrous items.
• Jordbalance: Essential for stable operation in mineralized soil. The T2LTD-BLK features manual ground balance. Refer to the detailed manual for specific ground balancing procedures.
• Antal toner: Selects the audio tone response for different target IDs.

Trigger-Actuated Pinpointing

To pinpoint a target, center the search coil over the detected object. Pull and hold the trigger located under the control housing. Slowly move the coil in a cross-pattern over the target. The audio tone will peak, and the target ID will stabilize when the coil is directly over the center of the object.

Vedligeholdelse og pleje

• Rensning: Tør detektoren af ​​med reklameamp klud efter hver brug. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the detector in a dry, cool place. Remove batteries if storing for extended periods to prevent leakage.
• Spolepleje: The search coils are waterproof and can be rinsed with fresh water. Ensure the coil cable connection to the control housing remains dry.
• Udskiftning af batteri: Udskift batterierne, når indikatoren for lavt batteriniveau vises på displayet.

Fejlfinding

Specifikationer

Garantioplysninger

Teknetics products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Teknetics webwebsted. Gem din købsbevis til garantikrav.

Kundesupport

For technical assistance, troubleshooting beyond this manual, or spare parts, please contact Teknetics customer support. You can find contact information on the official Teknetics webhjemmeside eller gennem din autoriserede forhandler.

Official Teknetics Webwebsted: Teknetics Store on Amazon