1. Introduktion
This manual provides comprehensive instructions for the installation, programming, operation, and maintenance of your Chamberlain Model #1573 Garage Door Remote Control. Please read this manual thoroughly before using the device to ensure proper function and safety. This remote control is designed to operate compatible Chamberlain and LiftMaster garage door openers.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for personskade eller beskadigelse:
- Hold fjernbetjeninger uden for børns rækkevidde.
- Betjen kun garageporten, når den er fuldt aktiveret view og fri for forhindringer.
- Never allow children to play with the garage door opener or remote control.
- Sørg for, at garageporten er helt lukket, inden du forlader ejendommen.
- Bortskaf batterier korrekt i henhold til lokale regler.
3. Produktet er slutview
The Chamberlain Model #1573 is a compact and ergonomic garage door remote control designed for ease of use. It features multiple buttons for controlling your garage door opener.
Figur 1: Front view of the Chamberlain Model #1573 remote control. The remote is black with the "CHAMBERLAIN" logo and a circular signal icon in gold on the upper left. Below this are three distinct, rectangular control buttons.
Figur 2: Tilbage view of the Chamberlain Model #1573 remote control. This side displays regulatory information including IC: 2666A, FCC ID: HBW1573, and the part number 41A6127-1. It also indicates "ASSEMBLED IN MEXICO" and includes a metal clip for attachment.
4. Setup & Programming
4.1. Batteriinstallation
The Chamberlain Model #1573 remote control requires AA or AAA batteries. To install or replace batteries:
- Find batteridækslet på bagsiden af fjernbetjeningen.
- Remove the cover by sliding it off or unscrewing it, depending on the design.
- Insert new AA or AAA batteries, ensuring correct polarity (+/-).
- Sæt batterirummets dæksel på igen.
4.2. Programmering af fjernbetjeningen
To program your remote control to your garage door opener, follow these general steps. Specific steps may vary slightly depending on your garage door opener model. Refer to your garage door opener's manual for detailed instructions if needed.
- Find Lær-knappen: On your garage door opener motor unit, locate the "Learn" button. This button is usually on the back or side panel of the motor unit, often near the antenna wire. The color of the learn button (e.g., red, purple, yellow, green) may indicate the frequency or technology of your opener.
- Tryk på Lær-knappen: Press and immediately release the "Learn" button on the garage door opener. The learn indicator light will glow steadily for 30 seconds.
- Press the Remote Button: Within 30 seconds, press and hold the button on your Chamberlain remote control that you wish to use to operate the garage door.
- Slip fjernbetjeningsknappen: Release the remote control button when the garage door opener lights flash or two clicks are heard. This indicates that the remote has been successfully programmed.
- Test fjernbetjeningen: Tryk på den programmerede knap på din fjernbetjening for at teste dens funktion. Garageporten burde aktiveres.
If the remote does not work, repeat the programming steps. Ensure you are within range of the garage door opener during programming.
5. Betjeningsvejledning
Once programmed, operating your Chamberlain Model #1573 remote control is straightforward:
- To Open or Close the Garage Door: Press the programmed button on your remote control. The garage door will begin to move.
- Sådan stopper du garageporten: Press the programmed button again while the door is in motion. The door will stop.
- To Reverse the Garage Door: If the door is stopped mid-travel, pressing the button again will reverse its direction.
Ensure a clear line of sight to the garage door and that no obstructions are present before operating.
6. Vedligeholdelse
6.1. Udskiftning af batteri
If the remote control's range decreases significantly or it stops responding, the batteries may need replacement. Refer to section 4.1 for battery installation instructions. The remote uses AA or AAA batteries.
6.2. Rensning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing eller interne komponenter.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Fjernbetjeningen virker ikke. | Dead or low batteries. Remote not programmed. Obstruction. | Replace batteries (AA or AAA). Reprogram the remote (see Section 4.2). Ensure no obstructions are blocking the signal or door path. |
| Reduceret rækkevidde. | Lave batterier. Interferens. | Replace batteries. Check for sources of radio frequency interference near the garage door opener. |
| Garageporten åbner/lukker af sig selv. | Stuck remote button. Interference. | Check remote buttons for sticking. Reprogram the remote and clear all previous codes from the opener. |
8. Specifikationer
- Modelnummer: #1573
- Varenummer: Chamberlain Group, Inc. Chamber Remote Controller IC:2666A #1573 FCC ID:#HBW1573 (Assembled In Mexico 41A6127-1)
- Mærke: KAMMERHERREN
- Varens vægt: 2.39 ounce
- Pakkedimensioner: 5.12 x 2.76 x 1.93 tommer
- Speciel funktion: Ergonomisk
- Batterier påkrævet: Yes (AA or AAA batteries)
- Maks. antal understøttede enheder: 1
- Kompatible enheder: Garageportåbnere
- Forbindelse teknologi: Radiofrekvens
- FCC ID: HBW1573
- IC: 2666A
9. Garanti og support
For warranty information or technical support, please refer to the official Chamberlain website or contact Chamberlain customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Online support: www.chamberlain.com/support
Telefonsupport: Refer to the Chamberlain webwebsted for regionale kontaktnumre.
10. Lovgivningsmæssige oplysninger
FCC-overensstemmelseserklæring
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: HBW1573.
Erklæring om overholdelse af Industry Canada (IC).
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IC: 2666A.
