Toro ttt-9v

Toro ttt-9v Electronic Faucet Watering Programmer

Brugervejledning

1. Introduktion

Thank you for choosing the Toro ttt-9v Electronic Faucet Watering Programmer. This device is designed to automate your watering schedule, providing convenience and efficiency for your garden or lawn. It allows for precise control over watering days, durations, and frequencies, operating automatically or manually.

This manual provides detailed instructions for installation, programming, operation, and maintenance to ensure optimal performance and longevity of your watering programmer.

2. Sikkerhedsoplysninger

Please read and understand all safety information before operating this device. Failure to follow these instructions may result in damage to the product or personal injury.

3. Produktet er slutview og komponenter

Familiarize yourself with the main components of your Toro ttt-9v watering programmer:

Toro ttt-9v Electronic Faucet Watering Programmer with LCD display and control buttons.

Figur 1: Front view of the Toro ttt-9v programmer. The image shows the grey unit with a clear LCD screen displaying '16:42' and '18'. Below the screen are buttons labeled 'On', 'Auto', 'Off', 'Time', 'Min', 'Hour', 'Day'. To the right of the screen are 'Man/Auto', 'Pro', and 'Esc' buttons. A 'Batt.L' indicator is visible on the left. The unit is mounted on a black stand, and a grey faucet connector is visible on the left side.

4. Opsætning

4.1. Batteriinstallation

  1. Find batteridækslet på bagsiden af ​​enheden.
  2. Fjern dækslet ved at skubbe eller skrue det af.
  3. Insert one new 9V alkaline battery, ensuring correct polarity (+/-).
  4. Sæt batteridækslet ordentligt på for at bevare vandtætheden.

Note: The unit will typically power on and display the current time or a default setting after battery installation.

4.2. Tilslutning til vandhane

  1. Sørg for, at din udendørs vandhane er slukket.
  2. Thread the faucet connector of the Toro ttt-9v programmer onto your outdoor faucet. Hand-tighten only; do not overtighten.
  3. Connect your garden hose or irrigation system to the outlet connector at the bottom of the programmer.
  4. Turn on your outdoor faucet fully. The programmer is designed to handle the water pressure.

5. Betjeningsvejledning

5.1. Indstilling af aktuel tid og dag

  1. Tryk på Tid knappen. Timevisningen blinker.
  2. Brug Time knappen for at justere timen.
  3. Tryk på Min knappen for at justere minutterne.
  4. Tryk på Dag knappen for at indstille den aktuelle ugedag.
  5. Trykke Esc or wait a few seconds for the settings to save.

5.2. Programming Automatic Watering Schedules

The Toro ttt-9v allows up to 8 watering cycles per day. You can select specific days and durations for each cycle.

  1. Tryk på Pro (Program) button to enter programming mode. The display will show the first program number (e.g., P1).
  2. Brug Time og Min buttons to set the desired start time for the watering cycle.
  3. Tryk på Dag button to select the days of the week for this program. You can cycle through individual days, weekdays, weekends, or all days.
  4. Trykke Pro again to move to the duration setting. Use the Time og Min buttons to set the watering duration (e.g., 30 minutes).
  5. Trykke Pro to save the current program and move to the next program number (P2, P3, etc.).
  6. Repeat steps 2-5 for additional watering cycles.
  7. Once all desired programs are set, press Esc for at forlade programmeringstilstand.

5.3. Driftstilstande

6. Vedligeholdelse

6.1. Udskiftning af batteri

When the 'Batt.L' indicator appears on the LCD screen, it's time to replace the battery. Follow the battery installation steps in Section 4.1. Replace the battery annually, even if the indicator has not appeared, to ensure reliable operation.

6.2. Rensning

Clean the exterior of the programmer with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment and connectors are free of dirt and debris.

6.3. Vinterklargøring

Before the first frost or during periods of freezing temperatures, it is crucial to disconnect the watering programmer from the faucet. Remove the 9V alkaline battery and store the unit indoors in a dry, temperate place. This prevents damage to the internal components and battery connectors caused by freezing water or condensation.

7. Fejlfinding

Problem Mulig årsag Løsning
Unit does not turn on or display is blank. Dødt eller forkert installeret batteri. Replace the 9V alkaline battery, ensuring correct polarity.
Watering does not start at programmed time. Unit is in Off or Manual mode; incorrect programming; low water pressure; faucet is off. Sørg for, at enheden er i Auto mode. Verify programming settings (time, duration, days). Check water supply and faucet.
Watering does not stop. Stuck valve; programming error. Trykke Slukket button. Check programming duration. If issue persists, disconnect from faucet and contact support.
Vandlækage fra tilslutninger. Løs forbindelse; beskadiget skive. Ensure connections are hand-tight. Check and replace rubber washers if damaged.

8. Specifikationer

9. Garanti og support

For warranty information or technical support, please refer to the official Toro webwebstedet eller kontakt deres kundeservice direkte. Behold din købskvittering som købsbevis.

Relaterede dokumenter - ttt-9v

Preview Toro GTS startgaranti og garantioplysninger
Dette dokument beskriver Toro GTS startgarantien og giver detaljerede garantiperioder og betingelser for Toro-produkter, herunder plæneklippere og batterier. Det dækker, hvad der er inkluderet og ikke omfattet af garantien, instruktioner til at få service og ejerens ansvar.
Preview Toro Multi-Pro 1250 plænesprøjte brugermanual
Omfattende brugermanual til Toro Multi-Pro 1250 plænesprøjten (model 41179), der dækker sikker betjening, vedligeholdelse og fejlfinding. Lær, hvordan du bruger din Toro-sprøjte effektivt og sikkert.
Preview Руководство оператора Toro Groundsmaster® 360
Это руководство оператора содержит важную информацию для безопасного и эффективного использоманич использоманич Groundsmaster® 360. Der er ingen optimeringsmuligheder, flere udbydere og tekniske applikationer обеспечения оптимальной производительности и долговечности оборудования.
Preview Toro S140 Snowthrower Operator's Manual
Comprehensive operator's manual for the Toro S140 Snowthrower (Model No. 38100-1000001 & UP), covering safety instructions, setup, operation, maintenance, and warranty information. Learn how to safely and effectively use and maintain your Toro snowthrower.
Preview Toro CCR 3650 GTS sneslynge brugermanual
Omfattende brugermanual til Toro CCR 3650 GTS sneslynge, der dækker oplysninger om opsætning, betjening, vedligeholdelse, sikkerhed og garanti. Lær, hvordan du bruger din sneslynge sikkert og effektivt.
Preview TORO Workman HD Utility Vehicle med Lad Reservedelskatalog
Officielt reservedelskatalog til TORO Workman HD Utility Vehicle med lad (model 07369). Find varenumre, beskrivelser og monteringsdetaljer til vedligeholdelse og reparation.