1. Produktet er slutview
The Nice Mindy TT1N is a control logic unit designed for the precise control of 230V motors used in applications such as blinds and roller shutters. This unit features an integrated radio receiver, simplifying installation and programming, and offers compatibility with various Nice remote controls and external sensors.
Nøglefunktioner:
- Controls motors up to 500 W.
- Stores up to 30 stations (remote controls).
- Adjustable operating time from 4 seconds to 4 minutes.
- Kompakte mål: 98 x 26 x 20 mm.
- Manufactured in Italy.
Figure 1: Nice Mindy TT1N Control Logic Unit. This image shows the compact white control unit with two white cables extending from one end. The unit has clear labeling for electrical connections and product specifications, including "Nice TT1N", "230V 50Hz", "Imax = 2,2A", "Pmax = 500W/400VA", and "IP55". A wiring diagram is also visible on the unit's surface.
2. Opsætning og installation
The Nice Mindy TT1N is designed for simple installation and programming. Ensure all power is disconnected before proceeding with any wiring.
2.1. Ledningsdiagram
Refer to the diagram printed on the unit for correct electrical connections. The unit is designed for 230V 50Hz power supply.
Figur 2: Detaljeret view of the Nice Mindy TT1N wiring diagram. The diagram shows terminals for motor connection (M, COM, Ground) and power supply (L, N). Numbered terminals (1-7) are also visible, indicating connections for control inputs and accessories. This diagram is crucial for proper installation.
- L (linje) og N (neutral): Connect to the 230V AC power supply.
- M (Motor) og COM (Fælles): Connect to the motor's power input.
- Jord symbol: Connect to the electrical ground.
- Klemmer 1-7: These terminals are used for various control inputs and accessories, such as remote control programming and external sensor connections. Consult the full product manual for specific functions of each terminal.
2.2. Programmering af fjernbetjeninger
The unit features an integrated 433 MHz radio receiver. It is compatible with Nice Way, Nice Ergo, Nice Plano, and Nice Flor-S remote controls. Refer to your remote control's manual for specific pairing instructions. Generally, programming involves pressing a button on the control unit and then a button on the remote control to establish communication.
2.3. Sensor Association
The TT1N can be associated with external sun, wind, and rain sensors (not supplied). These sensors allow for automated operation of the motor based on environmental conditions. Consult the sensor's manual and the TT1N's detailed programming guide for integration steps.
3. Betjeningsvejledning
Once installed and programmed, the Nice Mindy TT1N allows for convenient control of your motor.
3.1. Grundlæggende betjening
Use your paired Nice remote control to operate the connected motor. Typically, there are buttons for 'Up', 'Down', and 'Stop'.
- Tryk på 'Up' button to raise the blind/shutter.
- Tryk på 'Down' button to lower the blind/shutter.
- Tryk på 'Stop' button to halt movement at any point.
3.2. Automatic Operation (with Sensors)
If external sensors are connected and configured, the system can operate automatically:
- Sun Sensor: May automatically lower blinds/shutters when intense sunlight is detected.
- Vindsensor: May automatically raise blinds/shutters to protect them during high winds.
- Regnsensor: May automatically close windows or retract awnings during rain.
4. Vedligeholdelse
The Nice Mindy TT1N is designed for long-term reliability and requires minimal maintenance.
- Rensning: Tør jævnligt enhedens yderside af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Inspektion: Annually inspect wiring connections to ensure they are secure and free from damage.
- Miljøbeskyttelse: Ensure the unit remains within its specified IP55 rating environment, protected from excessive dust and water jets.
5. Fejlfinding
If you encounter issues with your Nice Mindy TT1N, consider the following common solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren reagerer ikke på fjernbetjeningen. | Remote control not paired or battery low. Power supply issue. | Re-pair the remote control. Check remote battery. Verify power to the TT1N unit. |
| Motoren stopper uventet. | Overload protection activated. Sensor input. | Check motor for obstructions. Verify sensor readings (e.g., high wind). Allow unit to cool if overloaded. |
| Enheden tændes ikke. | No power supply. Incorrect wiring. | Check main power supply. Inspect L and N connections. |
If problems persist, contact qualified technical support.
6. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | PÆN |
| Model | TT1N |
| Strømforsyning | 230V 50Hz |
| Max Current (Imax) | 2.2A |
| Maks. effekt (Pmax) | 500W / 400VA |
| Beskyttelsesvurdering | IP55 |
| Dimensioner (L x B x H) | 98 x 26 x 20 mm (approx. from package dimensions) |
| Radiofrekvens | 433 MHz |
| Remote Control Memory | Op til 30 stationer |
| Operating Time Programming | 4 seconds minimum to 4 minutes maximum |
7. Garanti og support
For warranty information, please refer to the documentation provided with your purchase or contact your local Nice distributor. Technical support can be obtained through the official Nice webstedet eller autoriserede servicecentre.
For yderligere hjælp, besøg venligst Nice official webwebsted.
