Indledning
Thank you for choosing the Bobrick B-398 Medicine Cabinet. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before installation and retain them for future reference.
Sikkerhedsoplysninger
- Always ensure power is disconnected before working near electrical outlets or wiring, if applicable.
- Brug passende personlige værnemidler (PPE) såsom sikkerhedsbriller og handsker under installationen.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the cabinet and its contents.
- Hold små dele og emballagematerialer væk fra børn for at forhindre kvælningsfare.
- Handle glass components (mirror) with care to avoid breakage and injury.
Pakkens indhold
Kontroller venligst, at alle komponenter er til stede, før installationen påbegyndes:
- Bobrick B-398 Medicine Cabinet Assembly
- Adjustable Shelves (Quantity: As specified for model)
- Mounting Hardware (Screws, anchors, etc.)
- Installationsskabelon (hvis inkluderet)
Figure 1: Bobrick B-398 Medicine Cabinet. This image shows the cabinet with its mirrored door slightly open, revealing the interior storage shelves. The cabinet is designed for recessed mounting.
Opsætning og installation
Nødvendige værktøjer:
- Målebånd
- Blyant
- Niveau
- Bor med passende bor
- Skruetrækker (Phillips eller flad, efter behov)
- Stud Finder (recommended for wall mounting)
Recessed Mount Installation (Wall Mount)
- Forbered åbningen: For recessed mounting, a rough opening in the wall is required. The dimensions for the rough opening should be slightly larger than the cabinet's recessed body dimensions. Refer to the specifications section for exact dimensions. Ensure there are no electrical wires or plumbing in the wall cavity where the cabinet will be installed.
- Placering: Determine the desired height and location for the cabinet. Use a level to mark the precise outline of the rough opening on the wall.
- Klip åbningen: Carefully cut the marked opening in the drywall or plaster. If cutting into studs, ensure proper framing is added to support the cabinet.
- Indsæt kabinet: Gently slide the cabinet body into the prepared wall opening. Ensure the front flange of the cabinet sits flush against the wall surface.
- Sikkert kabinet: Use the provided mounting screws to secure the cabinet to the wall studs or framing through the pre-drilled holes inside the cabinet. Ensure the cabinet is level and plumb before tightening all screws.
- Installer hylder: Insert the adjustable shelves into the desired positions using the shelf clips or supports provided.
Betjeningsvejledning
Opening and Closing the Door:
The Bobrick B-398 features a swing-out door. To open, gently pull the door handle or edge. To close, push the door until it is fully seated and flush with the cabinet frame.
Justering af hylder:
The cabinet includes adjustable shelves. To reposition a shelf, carefully lift it from its current supports, move the supports to the desired height, and then re-insert the shelf. Ensure shelves are securely seated before placing items on them.
Opretholdelse
Rengøring af kabinettet:
- Rustfrit stål finish: Tør overflader af med en blød, damp cloth and a mild, non-abrasive cleaner. For stubborn spots, use a stainless steel cleaner. Always wipe in the direction of the grain. Avoid abrasive pads or harsh chemicals.
- Spejl: Clean the mirror with a glass cleaner and a lint-free cloth. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into edges.
- Generel: Regularly dust the interior and exterior of the cabinet. Ensure the cabinet remains dry to prevent rust, especially in humid bathroom environments.
Inspektioner:
Periodically check all mounting screws to ensure they are tight. Inspect hinges for smooth operation and lubricate if necessary with a silicone-based lubricant.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Door does not close flush. | Forkert justerede hængsler eller blokering. | Check hinges for tightness and alignment. Remove any obstructions. |
| Cabinet feels loose on wall. | Monteringsskruerne er løse. | Tighten all mounting screws. Ensure cabinet is properly secured to wall studs/framing. |
| Shelves are wobbly. | Shelves not seated correctly on clips. | Ensure shelf clips are fully inserted and shelves are resting securely on them. |
Specifikationer
- Mærke: Bobrick
- Model: B-398
- Produktdimensioner: 5" D x 17" B x 27" H
- Ru vægåbning: Approximately 15-3/4" W x 25-3/4" H x 3-3/4" D (Note: Always measure actual unit for precise rough opening.)
- Varens vægt: 32 pund
- Monteringstype: Forsænket montering
- Dørstil: Swing Out
- Udfør type: Rustfrit stål
- Speciel funktion: Rustbestandig
- Inkluderede komponenter: Hylder
- Anbefalede anvendelser: Badeværelsestilbehør
- Farve: rød (Note: Color may vary by specific product variant.)
- ASIN: B005LTM9G8
- Dato først tilgængelig: 24. februar 2010
Garanti og support
For warranty information and customer support, please refer to the official Bobrick webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.
Bobrick Contact Information:
- Webwebsted: www.bobrick.com
- Kundeservice: Der henvises til webhjemmeside for regionale kontaktoplysninger.
