Rabalux 2322 Bath Under-Cabinet Light Instruction Manual

1. Introduktion

The Rabalux 2322 Bath Under-Cabinet Light is designed to provide efficient illumination and convenient power access in indoor environments. Its white finish integrates discreetly into various interior styles. This manual provides essential information for safe installation, operation, and maintenance of your Rabalux 2322 under-cabinet light.

Please read these instructions carefully before installation and use, and retain them for future reference.

Billede 1.1: Forside view of the Rabalux 2322 Under-Cabinet Light, showing the integrated fluorescent tube, power switch, and two electrical outlets on the right side.

2. Sikkerhedsinstruktioner

For at sikre sikker drift og forhindre skader skal følgende sikkerhedsretningslinjer overholdes:

• Kun indendørs brug: This product is designed exclusively for indoor use in enclosed spaces.
• Strømafbrydelse: Always disconnect the main power supply before performing any installation, maintenance, cleaning, or lamp udskiftning.
• IP20-klassificering: The fixture has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in areas where direct water contact or high humidity is present, despite the "Bath" designation which refers to style, not water resistance.
• Professionel installation: If you are not confident with electrical installations, consult a qualified electrician.
• Voltage: Sørg for, at strømforsyningen voltage matches the product's requirements (230 Volt).
• Lamp Type: Use only the specified lamp type (G13 T8 15W) for replacement.
• Ventilation: Sørg for tilstrækkelig ventilation omkring armaturet for at forhindre overophedning.
• Rensning: Brug ikke slibende eller ætsende rengøringsmidler.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede:

• 1 x Rabalux 2322 Under-Cabinet Light fixture
• 1 x T8 15W Fluorescent Tube (950 lm; 2700 K)
• Monteringsudstyr (skruer, ankre)
• Instruktionsmanual

Note: A connection cable for power supply is not included and must be provided separately.

4. Opsætning og installation

The Rabalux 2322 is designed for recessed mounting under cabinets or shelves. Follow these steps for installation:

1. Forberedelse: Sørg for, at hovedstrømforsyningen til installationsområdet er afbrudt ved afbryderen.
2. Monteringssted: Select a suitable, stable surface under a cabinet or shelf. Consider the dimensions of the fixture (60.5 cm length, 6.5 cm height, 8.5 cm depth) to ensure proper fit and clearance.
3. Mærkning: Use the fixture as a template to mark the drilling points for the mounting hardware.
4. Boring: Bor forboringshuller på de markerede steder. Indsæt vægankre om nødvendigt.
5. Ledningsføring: Connect the power supply cable (not included) to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. The fixture is designed for AC power (230V).
6. Montering af armaturet: Secure the fixture to the mounting surface using the provided screws.
7. Lamp Installation: Carefully insert the T8 fluorescent tube into the G13 sockets. Ensure it is seated correctly.
8. Endelig kontrol: Dobbelttjek alle forbindelser, og sørg for, at armaturet er sikkert monteret.
9. Tænd: Gendan strømmen ved afbryderen.

Image 4.1: Dimensional drawing of the Rabalux 2322 Under-Cabinet Light, indicating a length of 605mm, a height of 65mm, and a depth of 85mm.

5. Betjeningsvejledning

The Rabalux 2322 Under-Cabinet Light is straightforward to operate:

• Lysdrift: Use the integrated switch located on the right side of the fixture to turn the light ON or OFF.
• Strømudtag: The two integrated power outlets can be used to connect small electrical appliances. Ensure the total wattage of connected devices does not exceed the fixture's maximum capacity.
• Opvarmningstid: Fluorescerende lamps may require a few seconds to reach full brightness after being switched on. This is normal operation.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din lampes levetid og optimale ydeevne:

• Rensning: Afbryd strømmen før rengøring. Tør armaturet af med en blød, tør eller let fugtet klud.amp klud. Brug ikke skrappe kemikalier, slibende rengøringsmidler eller opløsningsmidler.
• Lamp Udskiftning:
  1. Sluk for strømforsyningen ved hovedafbryderen.
  2. Tillad lamp to cool down if it has been recently in use.
  3. Carefully remove the old T8 fluorescent tube from its G13 sockets.
  4. Insert a new G13 T8 15W fluorescent tube, ensuring it is securely seated.
  5. Gendan strømmen.
• Inspektion: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and address them immediately.

7. Fejlfinding

If you encounter problems with your Rabalux 2322 light, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, consult a qualified electrician or contact Rabalux customer support.

8. Specifikationer

9. Garanti og support

Garanti: For detailed warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Støtte: If you require technical assistance or have questions not covered in this manual, please contact Rabalux customer service through their official webwebstedet eller de kontaktoplysninger, der følger med dit produkt.