Manchester Tank 302419 Vertical Air Receiver Tank User Manual

1. Introduktion og produktoversigtview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Manchester Tank 302419 Vertical Air Receiver Tank. This tank is designed and constructed in accordance with ASME Section VIII Div-I Code for compressed air storage use, ensuring high standards of safety and performance. It is "U" Stamped and registered with the National Board of Pressure Vessel Inspectors.

Nøglefunktioner:

• 80 gallon kapacitet
• Includes Base Ring & Top Plate
• ASME Rated Tank
• Maximum Allowable Working Pressure (MAWP): 200 PSI

Figur 1.1: Manchester Tank 302419 Vertical Air Receiver Tank. This image displays the grey vertical air receiver tank with its base ring and top plate, designed for compressed air storage.

2. Sikkerhedsoplysninger

ADVARSEL: Failure to follow these safety instructions can result in serious injury, death, or property damage. Always adhere to local codes and regulations.

• Do not exceed the Maximum Allowable Working Pressure (MAWP) of 200 PSI.
• Ensure the tank is installed in a well-ventilated area.
• Regularly inspect the tank for signs of corrosion, damage, or leaks.
• Always drain condensate from the tank regularly to prevent corrosion and maintain tank integrity.
• Do not modify the tank in any way. Any modifications will void the warranty and could lead to dangerous conditions.
• Kun kvalificeret personale bør udføre installation, vedligeholdelse og reparationer.
• Install a pressure relief valve and pressure gauge as required by local codes and ASME standards.

3. Udpakning og inspektion

Upon receiving your Manchester Tank, carefully inspect the packaging for any signs of shipping damage.

1. Remove the tank from its packaging.
2. Thoroughly inspect the tank for any dents, scratches, or other physical damage.
3. Bekræft, at alle komponenterne, der er anført i afsnittet "Hvad er der i æsken", er til stede.
4. If any damage or missing parts are found, contact your supplier immediately before proceeding with installation.

4. Opsætning og installation

Proper installation is crucial for the safe and efficient operation of the air receiver tank. Installation must comply with all applicable national, state, and local codes, including ASME Boiler and Pressure Vessel Code.

• Beliggenhed: Install the tank on a level, stable, and non-combustible surface capable of supporting the tank's weight when full. Ensure adequate clearance for maintenance and inspection.
• Ventilation: The installation area must be well-ventilated to prevent heat buildup and ensure proper air circulation.
• Forbindelser: Connect the air inlet and outlet lines using appropriate fittings and piping. Ensure all connections are airtight and secure.
• Sikkerhedsanordninger: Install a properly sized and rated pressure relief valve and a pressure gauge on the tank. These devices are critical for safe operation and are required by code.
• Afløbsventil: Ensure the condensate drain valve at the bottom of the tank is accessible for regular draining.
• Forankring: Secure the tank to the floor or foundation using appropriate anchoring methods to prevent tipping, especially in seismic zones.

5. Betjeningsvejledning

Once installed, the air receiver tank is designed for straightforward operation as part of a compressed air system.

1. Indledende opstart: Before introducing air, ensure all connections are tight and the pressure relief valve is correctly installed and functioning.
2. tryksætning: Slowly introduce compressed air into the tank, monitoring the pressure gauge to ensure it does not exceed the MAWP of 200 PSI.
3. Normal drift: The tank will store compressed air, providing a stable supply and reducing compressor cycling.
4. Condensate Draining: Regularly drain accumulated condensate from the tank. The frequency depends on humidity and usage, but daily draining is recommended for most applications. Open the drain valve until all water is expelled, then close it securely.
5. Nedlukning: To depressurize the tank, shut off the air supply and slowly open a bleed valve or use the pressure relief valve (if designed for manual operation) to release air.

6. Vedligeholdelse

Regular maintenance is essential to ensure the longevity and safe operation of your air receiver tank.

• Daglig: Drain condensate from the tank.
• Ugentligt/Månedligt: Inspect the exterior of the tank for any signs of corrosion, dents, or other damage. Check all connections for leaks. Test the pressure relief valve according to manufacturer instructions.
• Årligt: A thorough internal and external inspection by a qualified inspector is recommended, especially in jurisdictions where it is required by law. Check for internal corrosion, pitting, or scale buildup.
• Rensning: Keep the exterior of the tank clean and free of debris. Do not use harsh chemicals that could damage the paint or tank material.

7. Fejlfinding

8. Specifikationer

9. Hvad er der i æsken

• Manchester Tank 302419 Vertical Air Receiver Tank
• Bundring
• Topplade

10. Garanti og support

For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact Manchester Tank directly. Ensure you have your model number (302419) and purchase date available when contacting support.

Contact information for Manchester Tank can typically be found on their official webwebstedet eller på produktets emballage.