1. Produktet er slutview
The Mr Beams MB985 ReadyBright Ceiling Light is designed to provide reliable illumination during power outages. This wireless LED light automatically activates when a power failure is detected, offering up to 40 hours of bright light. It is part of the ReadyBright Wireless Power Outage LED Lighting System and is controlled by the Mr. Beams MB220 remote control (sold separately). This light is not motion-activated; its primary function is to provide emergency lighting.

Billede 1.1: Top-down view of the Mr Beams MB985 ReadyBright Ceiling Light, showing its compact, round design and central LED.
2. Opsætning og installation
2.1 Hvad er der i æsken
- Mr Beams MB985 ReadyBright Ceiling Light
- Monteringsudstyr (skruer)
Note: Batteries and the MB220 remote control are not included with this single ceiling light unit.
2.2 Batteriinstallation
- Twist the back cover of the ceiling light counter-clockwise to open the battery compartment.
- Insert four (4) C-cell batteries, ensuring correct polarity (+/-).
- Replace the back cover by aligning and twisting clockwise until secure.
2.3 Montering af loftslampen
The MB985 ceiling light features simple wireless installation, requiring no electrician. It can be flush-mounted to a ceiling or wall.
- Select a desired mounting location on a ceiling or wall. Ensure the surface is suitable for screw installation.
- Separate the mounting plate from the light unit by twisting.
- Position the mounting plate at the chosen location and mark the screw holes.
- Using the provided screws, securely attach the mounting plate to the surface.

Image 2.1: A person's hands using a screwdriver to attach the white mounting plate to a ceiling surface.
- Align the ceiling light unit with the mounted plate and twist clockwise until it locks securely into place.

Image 2.2: A hand holding the Mr Beams ceiling light unit, aligning it with the previously installed mounting plate on the ceiling.
3. Betjeningsvejledning
The Mr Beams MB985 ReadyBright Ceiling Light operates as part of the ReadyBright Wireless Power Outage LED Lighting System. It is designed to work in conjunction with the Mr. Beams MB220 remote control (not included).
3.1 Power Outage Registrering
- Når en magt outage occurs, the MB985 ceiling light will automatically detect the power failure and illuminate.
- It provides up to 40 hours of continuous light on a single set of batteries during an outage.
3.2 Betjening af fjernbetjening
The MB985 light can be controlled manually using the MB220 remote control for convenience and to conserve battery life when not needed during an outage.
- Use the remote to turn the light ON or OFF as desired.
- The remote allows for maximum safety and convenience, enabling you to control the light from a distance.

Image 3.1: A person's hand holding the Mr Beams remote control, pointing towards two illuminated ceiling lights in a room, demonstrating remote operation.
3.3 Automatisk slukning
The light features an auto shut-off function to conserve battery life. If the light is activated during a power outage and no one is present, it will automatically turn off after a set period.

Image 3.2: A Mr Beams ceiling light providing illumination in a kitchen setting, with a woman and child visible, highlighting its use during an outage.
4. Vedligeholdelse
4.1 Udskiftning af batteri
When the light output diminishes or the light fails to activate, it is time to replace the batteries. Follow the steps in Section 2.2 for battery installation.
4.2 Rengøring
For at rengøre lampen skal du forsigtigt tørre den udvendige del af med en blød klud.amp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke enheden i vand.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke under strømafbrydelsetage. | Dead or incorrectly installed batteries. Not paired with a ReadyBright system. | Check and replace batteries, ensuring correct polarity. Ensure the light is properly integrated with a ReadyBright system and MB220 remote. |
| Light falls from mounting location. | Improper installation of mounting plate or light unit. | Ensure mounting screws are securely fastened. Verify the light unit is twisted and locked firmly onto the mounting plate. |
| Light does not respond to remote control. | Remote control batteries are dead or light is out of range. | Replace batteries in the MB220 remote control. Move closer to the light unit. |
| Lysudgangen er svag. | Lav batteristrøm. | Replace the C-cell batteries in the ceiling light. |
6. Specifikationer
- Model: MB985
- Mærke: MR BEAMS
- Lyskilde: LED
- Strømkilde: Cordless-electric (Battery-powered)
- Batterier påkrævet: 4 x C-cell batteries (not included)
- Batterilevetid: Up to 40 hours during power outage
- Materiale: Plast
- Farve: Hvid
- Installationsmetode: Flush Mount
- Særlige funktioner: Wireless, Power Outage Detection, Remote Controlled (with MB220 remote)
- Dimensioner (ca.): 25.4 x 22.9 x 17.8 cm (pakkemål)
7. Garanti og support
For warranty information and customer support, please refer to the official Mr. Beams webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.





