Intermatic 107SB189 ON Tripper for ML600TW Transformers Instruction Manual

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of the Intermatic 107SB189 ON Tripper. This component is specifically designed for use with Intermatic ML600TW series transformers to control the ON cycle of connected devices.

Læs venligst disse instruktioner omhyggeligt inden installation, og gem denne manual til senere brug.

2. Produktet er slutview

The Intermatic 107SB189 is a red plastic "ON" tripper. It functions as a mechanical marker on a timer dial, signaling the timer mechanism to activate (turn ON) the connected transformer at a specific time.

Figur 1: The Intermatic 107SB189 ON Tripper. This small, red plastic piece is designed to clip onto a timer dial to initiate an "ON" cycle.

3. Opsætning og installation

The 107SB189 ON Tripper is intended for installation on the timer dial of an Intermatic ML600TW series transformer. Ensure the transformer's power is disconnected before proceeding with installation.

1. Strømafbrydelse: Before handling the timer mechanism, ensure the ML600TW transformer is completely disconnected from its power source to prevent electrical hazards.
2. Locate Timer Dial: Open the transformer's enclosure to access the internal timer mechanism and its rotating dial.
3. Identify Tripper Slots: The timer dial will have slots or grooves around its perimeter designed to accept trippers.
4. Tilslut ON-tripper: Carefully align the 107SB189 ON Tripper with the desired "ON" time slot on the timer dial. Press the tripper firmly into place until it securely clips onto the dial. The tripper should sit flush and not interfere with the dial's rotation.
5. Bekræft placering: Gently rotate the timer dial manually to ensure the tripper is securely attached and moves freely with the dial without obstruction.
6. Gendan strøm: Once the tripper is securely installed and the enclosure is closed, reconnect power to the ML600TW transformer.

Note: Always refer to the primary instruction manual for your specific ML600TW transformer model for detailed safety warnings and complete installation procedures.

4. Betjening

Once installed, the 107SB189 ON Tripper works in conjunction with the timer mechanism of your ML600TW transformer. As the timer dial rotates, the ON tripper engages with an internal switch, initiating the "ON" cycle for the connected transformer and its associated lighting or other devices.

• The ON tripper marks the beginning of the active period.
• An accompanying "OFF" tripper (sold separately) is required to mark the end of the active period and turn the transformer OFF.
• The exact timing of the ON cycle is determined by the position of the ON tripper on the timer dial.

5. Vedligeholdelse

The Intermatic 107SB189 ON Tripper requires minimal maintenance.

• Rensning: Periodically inspect the tripper for dust or debris. If necessary, gently wipe it with a clean, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Inspektion: Ensure the tripper remains securely attached to the timer dial. If it appears loose or damaged, it may need to be replaced to ensure accurate timing.

6. Fejlfinding

If the transformer does not turn ON at the set time:

• Check Tripper Placement: Verify that the 107SB189 ON Tripper is correctly and securely installed on the timer dial at the desired ON time.
• Tjek timerindstillinger: Ensure the main timer mechanism of the ML600TW transformer is correctly set and functioning.
• Undersøg for forhindringer: Confirm that nothing is physically obstructing the tripper or the timer dial's rotation.
• Bekræft strøm: Ensure the ML600TW transformer is receiving power.
• Check OFF Tripper: Confirm that an OFF tripper is also installed and correctly positioned to complete the timing cycle.

If issues persist, consult the full manual for your ML600TW transformer or contact Intermatic customer support.

7. Specifikationer

8. Garanti og support

Specific warranty information for the Intermatic 107SB189 ON Tripper is not included in this manual. For details regarding warranty coverage, technical support, or replacement parts, please refer to the documentation provided with your Intermatic ML600TW transformer or visit the official Intermatic webwebsted.

Intermatic Officiel Webwebsted: www.intermatic.com