Indledning
This manual provides comprehensive instructions for the safe and effective use, installation, and maintenance of your MIPRO MB-70 Replacement Rechargeable 12V Battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Vigtige sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af batteriet og tilsluttet udstyr:
- Gør ikke kortslutte batteripolerne.
- Gør ikke expose the battery to extreme temperatures, direct sunlight, or fire.
- Gør ikke immerse the battery in water or other liquids.
- Gør ikke attempt to open, disassemble, or modify the battery.
- Opbevar batteriet utilgængeligt for børn og kæledyr.
- Bortskaf brugte batterier i henhold til lokale regler.
- Use only chargers specified for 12V lead-acid batteries.
Produkt overview
The MIPRO MB-70 is a high-quality, rechargeable 12V lead-acid battery designed as a replacement for compatible MIPRO audio equipment and other devices requiring a 12V power source. It provides reliable and consistent power for extended operation.

Image 1: The MIPRO MB-70 Replacement Rechargeable 12V Battery. This image shows the compact, rectangular form factor of the battery, typically black or dark gray, with visible terminals for connection.
Installationsvejledning
Follow these steps to safely install the MIPRO MB-70 battery into your compatible device:
- Sluk for enhed: Ensure the device requiring the battery replacement is completely powered off and disconnected from any power sources.
- Find batterirummet: Identify and open the battery compartment on your device. Refer to your device's manual for specific instructions.
- Fjern det gamle batteri: Carefully disconnect the old battery, noting the polarity (positive and negative terminals). Remove the old battery from the compartment.
- Isæt nyt batteri: Insert the MIPRO MB-70 battery into the compartment, ensuring the terminals align correctly with the device's connectors. Connect the positive (+) terminal first, then the negative (-) terminal.
- Sikkert rum: Luk og fastgør batterirummet.
- Indledende opkrævning: It is recommended to fully charge the battery before its first use. Refer to the "Charging the Battery" section.
Opladning af batteriet
To ensure optimal performance and battery life, follow these charging guidelines:
- Use a compatible 12V lead-acid battery charger. Using an incorrect charger can damage the battery or pose a safety risk.
- Connect the charger to the battery terminals, ensuring correct polarity (positive to positive, negative to negative).
- Sæt opladeren i en passende stikkontakt.
- Allow the battery to charge until the charger indicates a full charge (refer to your charger's instructions).
- Avoid overcharging, as this can reduce battery life. Disconnect the charger once the battery is fully charged.
- Oplad batteriet i et godt ventileret område.
Batterivedligeholdelse og -opbevaring
Proper maintenance and storage will extend the life of your MIPRO MB-70 battery:
- Almindelig opladning: If the battery is not used for extended periods, recharge it every 3-6 months to prevent deep discharge, which can permanently damage lead-acid batteries.
- Rengør terminaler: Keep the battery terminals clean and free of corrosion. Use a dry cloth to wipe them if necessary.
- Opbevaringsbetingelser: Opbevar batteriet et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Den ideelle opbevaringstemperatur er mellem 20°C og 25°C (68°F og 77°F).
- Undgå dyb udflåd: Do not allow the battery to completely discharge. Recharge it as soon as possible after use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Batteriet oplades ikke | Charger not connected properly; Faulty charger; Deeply discharged battery; Damaged battery. | Check charger connections; Try a different charger; Allow extended charging time for deeply discharged batteries (if applicable); Replace battery if damaged. |
| Kort driftstid efter fuld opladning | Battery capacity degradation; Incomplete charge; High power consumption by device. | Ensure full charge cycle; Consider battery replacement if capacity is significantly reduced; Check device for abnormal power draw. |
| Batteripoler tæret | Eksponering for fugt eller forkert opbevaring. | Clean terminals with a dry cloth or a soft brush. Ensure proper storage conditions. |
Hvis du støder på problemer, der ikke er nævnt her, eller hvis løsningerne ikke løser problemet, bedes du kontakte kundesupport.
Specifikationer
| Mærke | MIPRO |
| Modelnummer | D5741 (MB-70) |
| Voltage | 12 volt |
| Battericellesammensætning | Blysyre |
| Batterikapacitet | 4.5 Amp Timer |
| Varens vægt | 3 pund (ca. 1.36 kg) |
| UPC | 806593457418 |
| Første ledige dato | 14. november 2012 |
Garanti og support
For warranty information and technical support, please refer to the documentation provided with your original MIPRO product or visit the official MIPRO webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
For further assistance, you may contact the seller directly via the platform where the purchase was made.
Produktvideoer
Der er ingen officielle produktvideoer tilgængelige til indlejring på nuværende tidspunkt.





