LUX Pro PSD010BF Digital Ikke-programmerbar Termostat Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your LUX Pro PSD010BF Digital Non-Programmable Thermostat. This battery-powered thermostat is designed for heat-only systems with a fan, offering precise digital temperature control and a clear, easy-to-read display.

Billede 1: Forside view of the LUX Pro PSD010BF Digital Non-Programmable Thermostat.

Image 2: The PSD010BF thermostat seamlessly integrated into a home environment.

2. Sikkerhedsoplysninger

• Sluk altid for strømmen til varmesystemet ved hovedsikringen eller afbryderpanelet, før du installerer eller servicerer termostaten.
• Læs alle instruktioner omhyggeligt før installation og drift.
• Sørg for, at alle ledningsforbindelser er sikre og overholder lokale el-forskrifter.
• Denne termostat er designet til lav lydstyrketage systems only. Do not use with line voltage (120/240V) systems.
• Opbevar batterier utilgængeligt for børn.

3. Funktioner

The LUX Pro PSD010BF thermostat offers a range of features designed for user convenience and efficient heating control:

• Digital nøjagtighed: Provides precise temperature control for reliable performance.
• Ventilatorkontakt: Includes a fan switch for convenient control (AUTO/ON).
• Batteridrevet: Operates solely on battery power (2 AA batteries included).
• Large LED Illuminated Display: Easy-to-read digital display with backlight for visibility in various lighting conditions.
• Attractive Slim Design: Modern aesthetic suitable for any room.
• Quick & Easy Temperature Change Buttons: Intuitive up/down buttons for setting desired temperature.
• F/C Selectable Temperature Display: Option to display temperature in Fahrenheit or Celsius.
• Fixed 5 Minute Minimum Run / Off Time: Protects heating equipment.

Image 3: Detailed diagram highlighting the key features and controls of the thermostat.

4. Kompatibilitet

The LUX Pro PSD010BF thermostat is compatible with the following systems:

• Most 24-volt, single-stage heating systems, with or without a blower fan.
• Millivolt systems (e.g., gas fireplaces, floor furnaces).

This thermostat ikke kan be used to control:

• Kølesystemer.
• Heat pumps.
• 3-wire zone valves.
• 120/240 volt (line voltage) systemer.

For other system types, please consult your dealer for alternative LUXPRO thermostats.

Image 4: Official compatibility guidelines for the thermostat.

5. Installation

5.1 Tjekliste før installation

• Ensure the thermostat is compatible with your heating system (refer to Section 4).
• Gather necessary tools: Phillips screwdriver, wire strippers (if needed), drill (if new mounting holes are required).
• Turn off power to the heating system at the circuit breaker.

5.2 Afmontering af din gamle termostat

1. Sluk for strømmen til varmesystemet.
2. Fjern dækslet på din gamle termostat.
3. Note the wire connections. It is recommended to take a picture or label each wire with the terminal designation (e.g., R, W, G).
4. Frakobl ledningerne, og fjern den gamle termostatbase fra væggen.

5.3 Wiring Your New Thermostat

The PSD010BF is designed for simple 2-wire or 4-wire heat-only systems. Refer to the diagram below for typical wiring configurations.

Image 5: Wiring diagram for heating-only systems, including those with a fan. Note the jumper between RC and RH.

• Connect the wires from your heating system to the corresponding terminals on the new thermostat base.
• For heating-only systems, ensure the jumper between RC og RH terminals is installed.
• W1 terminal: Connect to the heating control wire.
• G terminal: Connect to the blower fan control wire (if applicable).
• Sørg for, at alle forbindelser er tætte og sikre.

5.4 Montering af termostaten

1. Secure the thermostat base to the wall using the provided screws. Avoid overtightening.
2. Insert two fresh AA batteries into the battery compartment. Ensure correct polarity.
3. Carefully align the thermostat front cover with the base and snap it into place.

6. Betjening

6.1 Tænding og første opsætning

1. After installation and battery insertion, restore power to your heating system at the circuit breaker.
2. The thermostat display should illuminate, showing the current room temperature.
3. Use the F/C selectable temperature display option if you wish to change between Fahrenheit and Celsius (refer to the thermostat's internal settings or specific instructions for this model if available, otherwise assume it's a simple switch).

6.2 Indstilling af temperaturen

• Brug ▲ (Op) og ▼ (Down) buttons on the front of the thermostat to adjust the desired temperature.
• The display will show the set temperature briefly, then revert to the current room temperature.
• The heating system will activate when the room temperature falls below your set temperature.

6.3 Ventilatorstyring

The thermostat features a fan slide switch with two positions:

• BIL: The fan will run only when the heating system is actively heating. This is the recommended setting for normal operation.
• PÅ: The fan will run continuously, regardless of whether the heating system is active.

6.4 Systemtilstand

The thermostat features a mode slide switch with two positions:

• VARME: Termostaten styrer dit varmesystem for at opretholde den indstillede temperatur.
• OFF: The heating system is turned off. The thermostat will not activate the heater.

7. Vedligeholdelse

7.1 Udskiftning af batteri

The thermostat is powered by two AA batteries. Replace them annually or when the low battery indicator appears on the display.

1. Gently pull the thermostat cover from the base to access the battery compartment.
2. Fjern de gamle batterier og bortskaf dem på en ansvarlig måde.
3. Isæt to nye AA alkaline-batterier, og sørg for at polariteten (+/-) vender korrekt.
4. Snap the thermostat cover back onto the base.

Note: Replacing batteries typically does not affect your temperature settings.

7.2 Rengøring

Rengør termostatens yderside med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.

8. Fejlfinding

9. Specifikationer

• Model: PSD010BF
• Strømkilde: 2 AA batterier (medfølger)
• Voltage: 24 Volts (low voltage)
• Kontroltype: Push Button, Slide Switch
• Skærmtype: Digital, LED Backlit
• Produktdimensioner: 1.25" D x 3.5" B x 5.25" H
• Varens vægt: 1.92 ounce
• Materiale: Plast
• Farve: Hvid
• Monteringstype: Vægmontering
• Specifikke anvendelser: Heating only systems

10. Garanti og support

For warranty information or technical support, please refer to the official LUX webwebstedet eller kontakt LUX kundeservice direkte. Gem din købskvittering som købsbevis.

LUX Customer Support: www.luxproproducts.com/support