Indledning
This manual provides essential information for the assembly, operation, and maintenance of your HON Wave High Back Ergonomic Office Chair. Please read these instructions carefully before use to ensure proper function and longevity of your chair.
The HON Wave High Back Ergonomic Office Chair is designed for comfort and support during extended periods of use. It features a breathable mesh back, a padded seat, adjustable arms, and various recline and height adjustment controls to customize your seating experience.
Image: The HON Wave High Back Ergonomic Office Chair, showcasindens design og funktioner.
Video: Officielt produkt slutview of the HON Wave High Back Office Chair by OFM, LLC.
Sikkerhedsoplysninger
Maksimal vægtkapacitet: This chair is designed to support up to 250 lbs. Exceeding this weight limit may cause damage to the chair or pose a safety risk.
- Sørg for, at alle komponenter er forsvarligt fastgjort før brug.
- Stå ikke på stolen.
- Undgå at placere tunge genstande på stolens ryglæn eller armlæn.
- Hold hænder og fødder væk fra bevægelige dele under justering.
Monteringsvejledning
Assembly is required. The product comes with arms, base, and casters, which need to be attached. Refer to the detailed assembly guide included in the packaging for step-by-step instructions and diagrams. Ensure all parts are present before beginning assembly.
Betjeningsvejledning
1. Sædehøjdejustering
To adjust the seat height, locate the lever on the right side beneath the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up slightly and pull the lever upwards. Release the lever at your desired height.
2. Arm Height Adjustment
The armrests are height-adjustable. Locate the button on the side of each armrest. Press and hold the button, then move the armrest up or down to your preferred height. Release the button to lock the armrest in place.
Image: A person demonstrating the adjustable seat height and arm height features of the HON Wave chair.
3. Synchro-Tilt Recline
The chair features a synchro-tilt mechanism, allowing the backrest and seat to recline simultaneously at a coordinated ratio. To recline, push the recline lever outwards (away from the chair). To lock the recline position, pull the lever inwards (towards the chair).
4. Justering af hældningsspænding
Adjust the resistance of the recline mechanism using the round knob located under the seat, typically at the front. Turn clockwise to increase tension (more resistance) or counter-clockwise to decrease tension (less resistance).
5. Vippelås
The tilt lock feature allows you to lock the chair's recline at a desired angle. Engage the tilt lock by pushing the recline lever inwards once the desired angle is achieved.
Image: A visual guide explaining the Synchro-Tilt, Tilt-Tension, and Tilt-Lock functions for customizing comfort.
6. 360° drejning
The chair is equipped with a smooth-rolling base that allows for full 360-degree swivel, providing effortless movement and flexibility in your workspace.
Video: Product demonstration video by Amazon Product Imaging, showing various chair adjustments.
Opretholdelse
Produktplejeinstruktioner: Wipe Clean. For general cleaning, use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or solvents that may damage the mesh or fabric. Regularly check and tighten any loose screws or bolts to ensure stability and safety.
Fejlfinding
- Stol justerer ikke højden: Ensure the height adjustment lever is fully engaged and that no weight is on the seat when attempting to raise it. If lowering, ensure you are seated.
- Chair not reclining: Check that the recline lock lever is disengaged. Adjust the tilt tension knob if the recline feels too stiff or too loose.
- Knirkende lyde: Apply a small amount of silicone-based lubricant to moving parts, especially around the base and tilt mechanism.
- Hjul ruller ikke jævnt: Clean any debris (hair, dust) from the caster wheels. If severely worn, replacement casters may be needed.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | HON |
| Modelnavn | Bølge |
| Varemodelnummer | BSXVL702MM10 |
| Farve | Mesh Back - High Back (Black) |
| Produktdimensioner | 26.5" D x 26.5" B x 40.5" H |
| Sædehøjde | Adjustable, 18" to 22.25" |
| Sædedybde | 20 tommer |
| Maksimal vægtanbefaling | 250 pund |
| Materiale | Mesh, Metal, Plastic (Foam fill for seat) |
| Særlige funktioner | Adjustable Height, Arm Rest, Rolling, Synchro-Tilt, Upright Tilt Lock, Tilt Tension |
| Forsamling | Required (Arms, base, casters need attachment) |
Image: Detailed dimensions of the HON Wave High Back Ergonomic Office Chair.
Garanti og support
The HON Wave Ergonomic Office Chair is backed by the HON 5-Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use. For specific warranty details, claims, or technical support, please refer to the warranty documentation included with your product or visit the official HON webwebsted.
For yderligere produktinformation og support kan du besøge HON Store on Amazon.
