Showtec LED Par 64 Kort Q4-18 Sort Brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient operation of your Showtec LED Par 64 Short Q4-18 Black. This LED PAR floor spot is designed for professional lighting applications, offering versatile illumination for various events and venues. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury.

2. Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for elektrisk stød, brand eller personskade:

• Sørg for, at enheden er tilsluttet en jordet stikkontakt med den korrekte lydstyrke.tage (2.4E+2 Volts AC).
• Udsæt ikke enheden for regn eller fugt.
• Åbn ikke kabinettet. Der er ingen dele indeni, som brugeren kan servicere. Overlad al service til kvalificeret servicepersonale.
• Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning.
• Undgå direkte øjeneksponering for lyskilden.
• Afbryd altid strømforsyningen før rengøring eller vedligeholdelse.
• Håndter enheden forsigtigt. Undgå at tabe den eller udsætte den for hårde stød.

3. Produktet er slutview

The Showtec LED Par 64 Short Q4-18 is a robust lighting fixture designed for durability and performance. Below are key views af produktet:

Figur 3.1: Forside view of the Showtec LED Par 64 Short Q4-18 Black, showing the LED array and the sturdy black aluminum housing with its adjustable yoke.

Figure 3.2: The LED Par 64 with its powerful LEDs illuminated, demonstrating its light output capability.

Figure 3.3: Rear panel of the unit, featuring the digital display, control buttons (Mode, Setup, Up, Down), DMX In/Out ports, and the fuse holder (1A/250V).

4. Opsætning

Follow these steps to set up your LED Par 64 Short Q4-18:

1. Montering: Securely mount the fixture using the integrated yoke. Ensure it is stable and can support the weight of the unit (4.05 kg).
2. Strømtilslutning: Connect the power cable to a suitable grounded AC power outlet (2.4E+2 Volts AC).
3. DMX-forbindelse (valgfri): For DMX control, connect a DMX cable from your DMX controller to the DMX In port on the rear panel. If linking multiple units, connect from the DMX Out of the first unit to the DMX In of the next.
4. Første gang tændt: Once connected, the unit will power on and the display on the rear panel will illuminate.

5. Betjening

The LED Par 64 Short Q4-18 can be operated in various modes, including standalone and DMX control.

5.1 Kontrolpanel overview

The rear control panel (refer to Figure 3.3) features a digital display and four buttons:

• Mode: Cycles through different operating modes (e.g., DMX, Auto, Sound Active).
• Opsætning: Enters/confirms settings within a selected mode.
• Op: Navigates up through menu options or increases parameter values.
• Ned: Navigates down through menu options or decreases parameter values.

5.2 DMX-styring

To control the fixture via DMX, set the DMX address using the control panel. Consult the specific DMX channel chart (usually provided in a separate DMX manual or appendix) for detailed control parameters such as dimmer, color mixing, and strobe effects.

5.3 Selvstændige tilstande

Use the 'Mode' button to select standalone programs. These may include:

• Automatiske programmer: Pre-programmed light shows that run automatically.
• Lyd aktiv: The light reacts to ambient sound via a built-in microphone.
• Statisk farve: Select and display a single static color.

Use the 'Up' and 'Down' buttons to adjust parameters within these modes (e.g., program speed, sound sensitivity, color intensity).

6. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your LED Par 64 Short Q4-18.

• Rensning: Disconnect power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp klud kan bruges. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Rengøring af linser: Gently clean the LED lenses with a soft cloth and a mild glass cleaner if necessary.
• Udskiftning af sikring: If the unit does not power on, check the fuse located on the rear panel (refer to Figure 3.3). Replace with a fuse of the same type and rating (1A/250V).
• Inspektion: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

If the problem persists after attempting these solutions, please contact Showtec customer support.

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Showtec webwebsted. Gem din købsbevis i tilfælde af garantikrav.

Fabrikant: Showtec

Webwebsted: www.highlite.com/en/brands/showtec