Brugermanual til Intermatic IOS-DPBIF-IV Decorator PIR-tilstedeværelsessensor

Produkt overview

The Intermatic IOS-DPBIF-IV is a Decorator Passive Infrared (PIR) Occupancy Sensor designed for automatic lighting control. This sensor detects motion within its field of view to turn lights ON and OFF, providing energy savings and convenience. It features an ivory finish and is suitable for wall mounting.

Billede: Forside view of the Intermatic IOS-DPBIF-IV Decorator PIR Occupancy Sensor in ivory color. The top section houses the PIR lens, and the bottom section features a manual override button.

Nøglefunktioner:

• Adjustable time delay for lights to turn OFF, ranging from 15 seconds to 30 minutes.
• Wide coverage area of 150 degrees, covering up to 980 square feet.
• Automatic ON/OFF control based on occupancy detection.
• Compatible with CFL (Compact Fluorescent Lamp) lighting.
• Includes a decorator wall plate for a clean installation.

Opsætning og installation

Vigtige sikkerhedsoplysninger: Before beginning installation, ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. Installation should be performed by a qualified electrician or a knowledgeable individual familiar with electrical wiring.

1. Strømafbrydelse: Locate the circuit breaker or fuse that supplies power to the switch box where the sensor will be installed. Turn OFF the power. Verify power is off using a voltage tester.
2. Fjern eksisterende switch: Carefully remove the existing wall plate and switch from the electrical box. Disconnect the wires from the old switch, noting their connections (e.g., line, load, ground, neutral if present).
3. Tilslutning af sensoren: Connect the wires from the wall box to the corresponding wires on the IOS-DPBIF-IV sensor. Refer to the wiring diagram provided with the product packaging for specific connections. Typically, this involves connecting the Line (hot), Load, and Ground wires. A neutral wire connection may also be required depending on the specific model and electrical code.
4. Montering af sensoren: Gently push the wired sensor into the electrical box. Secure it with the provided mounting screws.
5. Installer vægplade: Attach the decorator wall plate over the sensor.
6. Gendan strøm: Tænd for strømmen igen ved afbryderen eller sikringsboksen.

Note: For detailed wiring diagrams and specific electrical requirements, consult the full installation guide included with your product or available on the manufacturer's webwebsted.

Betjeningsvejledning

The Intermatic IOS-DPBIF-IV sensor operates automatically based on detected occupancy. It also includes a manual override button.

Automatisk drift:

• When motion is detected within the sensor's 150-degree field of view, the connected lights will turn ON.
• The lights will remain ON as long as occupancy is detected.
• After no motion is detected for a preset time delay, the lights will automatically turn OFF. The time delay can be adjusted from 15 seconds to 30 minutes. Refer to the product's internal settings or instructions for adjusting this delay.

Manuel tilsidesættelse:

The sensor features a manual push-button switch located on the front face. This button allows for manual control of the lights, overriding the automatic occupancy detection.

• Press to Turn ON/OFF: A single press of the button will toggle the lights ON or OFF, regardless of occupancy.
• Return to Automatic: After manual operation, the sensor typically returns to automatic mode after a period of time or upon the next detection of occupancy, depending on the specific model's logic. Consult the full manual for details on how manual override interacts with automatic mode.

Opretholdelse

The Intermatic IOS-DPBIF-IV Occupancy Sensor requires minimal maintenance to ensure optimal performance.

• Rensning: Periodically wipe the sensor lens and housing with a soft, dry cloth to remove dust or dirt. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
• Kontrol af obstruktion: Ensure that the sensor's field of view is not obstructed by furniture, curtains, or other objects that could interfere with motion detection.
• Ingen dele, der kan serviceres af brugeren: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit. Refer any issues to qualified service personnel.

Fejlfinding

If you experience issues with your Intermatic IOS-DPBIF-IV Occupancy Sensor, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Intermatic customer support or consult a qualified electrician.

Specifikationer

Garantioplysninger

The Intermatic IOS-DPBIF-IV Occupancy Sensor comes with a 2 års begrænset garanti. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and details on how to make a warranty claim, please refer to the official warranty statement included with your product or visit the Intermatic webwebsted.

Note: The warranty typically covers product replacement for eligible defects.

Support og yderligere ressourcer

For additional assistance, technical support, or to access the complete product documentation, please use the following resources:

• Officiel brugervejledning (PDF): Download PDF
• Intermatic Webwebsted: Besøg den officielle Intermatic webhjemmeside med produktinformation, ofte stillede spørgsmål og kontaktoplysninger.
• Kundeservice: Contact Intermatic customer service for direct support regarding installation, operation, or troubleshooting.