Utilitech 00144506

Utilitech Digital Plug-in Countdown Timer User Manual

Model: 00144506

Brand: Utilitech

Indledning

This manual provides detailed instructions for the safe and efficient operation of your Utilitech 15-Amp 1-Outlet Digital Residential Plug-in Countdown Function Lighting Timer. Please read this manual thoroughly before use and retain it for future reference.

Vigtige sikkerhedsoplysninger

Produktegenskaber

Opsætningsvejledning

Udpakning og første inspektion

Carefully remove the timer from its packaging. Inspect the unit for any signs of damage. If damaged, do not use and contact customer support.

Front view of the Utilitech Digital Timer in its retail packaging, showing the digital display and control buttons.

Figur 1: Front view of the Utilitech Digital Timer in its retail packaging. The timer features a digital display and control buttons for setting time and functions. The packaging highlights key features like "Easy-program" and "Slim design."

Tilbage view of the Utilitech Digital Timer packaging, showing the plug and product information.

Figur 2: Tilbage view of the Utilitech Digital Timer packaging. This side displays the two-prong plug, electrical ratings, and compliance information. It also includes the UPC: 686140684241.

Tilslutning

  1. Locate a standard 120V AC wall outlet.
  2. Plug the Utilitech Digital Timer directly into the wall outlet. Ensure it is firmly seated.
  3. The LCD display should illuminate, indicating power.

Betjeningsvejledning

Indstilling af den aktuelle tid

  1. Tryk på TIME knappen for at justere timen.
  2. Tryk på MIN knappen for at justere minutter.
  3. The time will automatically save after a few seconds of inactivity.

Programming On/Off Times

The timer allows for setting specific ON and OFF times for connected devices.

  1. Tryk på ON button to set the desired turn-on time. Use TIME og MIN at justere.
  2. Tryk på SLUKKET button to set the desired turn-off time. Use TIME og MIN at justere.
  3. To activate the programmed schedule, ensure the timer is in "Auto" mode (if applicable, refer to display icons).

Using the Countdown Function

The countdown function allows the connected device to remain on for a set duration before turning off.

  1. Plug the device you wish to control into the timer's outlet.
  2. Tryk på NEDTÆKLING button (if available, or cycle through modes until countdown is active).
  3. Brug TIME og MIN knapperne for at indstille den ønskede nedtællingsvarighed.
  4. The timer will automatically turn off the device once the countdown reaches zero.

Nulstilling af timeren

To clear all settings and return the timer to its default state:

Opretholdelse

The Utilitech Digital Timer requires minimal maintenance.

Fejlfinding

ProblemMulig årsagLøsning
Timerdisplayet er tomt.Ingen strøm til stikkontakten.Check the wall outlet with another device. Check circuit breaker.
Device not turning on/off at programmed times.Incorrect programming; Timer not in "Auto" mode; Device not properly plugged into timer.Review programming steps. Ensure timer is in "Auto" mode. Confirm device is fully plugged into the timer.
Display shows erratic characters.Temporary electrical interference.Perform a full reset of the timer.

Specifikationer

Garanti og support

For information regarding warranty coverage or technical support, please refer to the original product packaging or contact Utilitech customer service directly. Contact details are typically provided on the manufacturer's webwebsted eller inkluderet dokumentation.

Relaterede dokumenter - 00144506

Preview UTILITECH Trådløs Indendørs Sirene TSE07-1 Brugermanual & Opsætningsvejledning
Omfattende guide til UTILITECH trådløs indendørs sirene (model TSE07-1), inklusive opsætning, monteringsvejledning, betjeningsprocedurer, fejlfinding og Z-Wave-netværksforbindelse. Kompatibel med Iris Smart Hub.
Preview TM-029 Digital timer til indbygning i væggen, 7 dage: Installations- og programmeringsvejledning
Detaljerede instruktioner til installation og programmering af Utilitech TM-029 indbygget 7-dages digital timer. Lær, hvordan du indstiller uret, planlægger daglige tænd/sluk-hændelser, bruger automatiske, tilfældige og manuelle tilstande og forstår enhedens specifikationer.
Preview Utilitech UTTNID001 Digital Timer: Programming and User Guide
Learn how to program and use the Utilitech UTTNID001 digital timer with this comprehensive guide. Covers initial setup, scheduling ON/OFF events, manual override, troubleshooting, safety, and warranty information.
Preview Utilitech TM-097 In-Wall Timer: Installation and Operation Manual
This manual provides detailed instructions for installing, programming, and troubleshooting the Utilitech TM-097 In-Wall Timer. Learn how to set schedules, override settings, and ensure safe operation.
Preview Utilitech 7150-12-L Bath Fan Control Switch with Timer - Wall-Mounted LCD Touch Panel
Installation and operating instructions for the Utilitech 7150-12-L bath fan control switch. This wall-mounted LCD touch panel allows control of bath fans and lights, featuring a timer and dimming capabilities. Includes product specifications, wiring diagram, safety precautions, and customer support information.
Preview Utilitech 3-i-1 installationsvejledning til indbygget LED-downlight (model MQTL1181-LED10K9027)
Omfattende installationsvejledning til Utilitech 3-i-1 indbygget LED-downlight, model MQTL1181-LED10K9027. Indeholder forberedelse, fejlfinding, vedligeholdelse, sikkerhedsoplysninger og trinvise installationsinstruktioner til forskellige planer.