Johnson Controls A19ADB-2 Direkte Immersions Temperaturregulator Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Johnson Controls A19ADB-2 Direct Immersion Temperature Controller. This device is designed for precise temperature regulation in various industrial and scientific applications, specifically within a 100/240°F range. Please read this manual thoroughly before attempting any installation or operation to ensure safe and efficient use of the product.

2. Sikkerhedsoplysninger

ADVARSEL: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read and understand these instructions completely before proceeding.

• Always disconnect power before servicing the unit to prevent electrical shock.
• Sørg for, at al ledningsføring overholder lokale og nationale elektriske forskrifter.
• Installation bør kun udføres af kvalificeret personale.
• Overskrid ikke enhedens angivne elektriske klassificeringer.
• Protect the device from moisture and extreme temperatures outside its operating range.

3. Produktet er slutview

The Johnson Controls A19ADB-2 is a direct immersion temperature controller designed for applications requiring precise temperature sensing and control. It features a robust housing and an immersion bulb for direct contact with the medium being controlled. The unit is capable of operating within a temperature range of 100°F to 240°F.

Figur 1: Johnson Controls A19ADB-2 Direct Immersion Temperature Controller. This image shows the main unit with its gray protective casing, a visible adjustment dial on the top, and the copper immersion bulb extending from the right side, designed for direct contact with the controlled medium.

Nøglefunktioner:

• Direct immersion sensing for accurate temperature measurement.
• Adjustable setpoint within 100°F to 240°F range.
• Durable construction suitable for industrial environments.
• Open-high (m/r open-hi) contact configuration.

4. Opsætning og installation

Installation of the A19ADB-2 controller requires careful attention to detail and adherence to safety protocols. It is recommended that installation be performed by a certified technician.

4.1 Montering af controlleren

1. Select a suitable location for mounting the controller, ensuring it is easily accessible for adjustments and maintenance, and protected from excessive vibration or physical damage.
2. Ensure the immersion bulb can be fully submerged in the medium whose temperature is to be controlled.
3. Securely fasten the controller housing using appropriate mounting hardware.

4.2 Elektriske ledninger

FORSIGTIGHED: Disconnect all power before making electrical connections.

• Refer to the wiring diagram provided with the unit (not included in this general manual) for specific connection points.
• Tilslut strømforsyningsledningerne til de dertil indrettede terminaler.
• Connect the load wires (e.g., to a heater or cooling element) to the appropriate control terminals.
• Sørg for, at alle forbindelser er tætte og sikre for at forhindre løse kontakter og potentielle farer.

5. Betjeningsvejledning

Once installed and wired, the A19ADB-2 controller is ready for operation.

5.1 Indstilling af temperatursætpunktet

1. Locate the adjustment knob on the top of the controller housing (refer to Figure 1).
2. Rotate the knob to align the desired temperature with the indicator mark. The temperature range is 100°F to 240°F.
3. The controller will now maintain the temperature of the immersed medium at or around the setpoint.

5.2 Understanding Control Action

The A19ADB-2 features an "open-high" (m/r open-hi) contact configuration. This typically means the control contacts open when the sensed temperature rises above the setpoint, and close when the temperature falls below the setpoint. This action is suitable for applications where the controlled device (e.g., a heater) needs to be turned off when the temperature is too high.

6. Vedligeholdelse

The Johnson Controls A19ADB-2 is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure its longevity and accuracy.

• Rensning: Keep the exterior of the controller clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Forbindelser: Kontrollér regelmæssigt de elektriske forbindelser for tæthed og tegn på korrosion.
• Immersion Bulb: Ensure the immersion bulb is clean and free from buildup that could affect temperature sensing accuracy.
• Kalibrering: While the unit is factory calibrated, if precise accuracy is critical and deviations are suspected, professional recalibration may be required.

7. Fejlfinding

This section provides solutions to common issues encountered with the A19ADB-2 temperature controller.

If troubleshooting steps do not resolve the issue, contact Johnson Controls technical support or a qualified service technician.

8. Specifikationer

9. Garanti og support

For specific warranty information regarding your Johnson Controls A19ADB-2, please refer to the documentation included with your purchase or visit the official Johnson Controls website. For technical support, service, or parts, please contact Johnson Controls customer service directly.

Kontaktoplysninger: Please refer to the official Johnson Controls webhjemmeside for de seneste kontaktoplysninger.