Uline Comfort-Grip Kniv Brugermanual

Indledning

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.

Sikkerhedsoplysninger

WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.

Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.

Komponenter

The Uline Comfort-Grip Knife consists of the following main components:

Håndtag: Ergonomisk designet for et komfortabelt greb.
Blade Retraction Button: Used to extend and retract the blade.
Klinge: Replaceable carbon steel utility blade.
Mekanisme til udløsning af blad: Allows for quick blade changes.

Uline Comfort-Grip Knife showing handle, blade, and retraction button — Figur 1: Overview of the Uline Comfort-Grip Knife. This image displays the blue handle with the orange ULINE logo, the silver blade housing, and the exposed black utility blade. The blade retraction button is visible on top of the handle.

Opsætning

Blade Installation (Initial Setup)

Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:

Locate the blade release mechanism, typically a button or lever near the front of the knife.
Press and hold the blade release mechanism.
Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.

Note: Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.

Betjeningsvejledning

Udtrækning og tilbagetrækning af bladet

The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.

To extend the blade, locate the textured thumb slide button on the top of the handle.
Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.

Vigtig: Always retract the blade fully when the knife is not in active use or when storing it.

Skæreteknikker

For optimal ydeevne og sikkerhed:

Skær altid væk fra din krop.
Use a cutting mat or a sacrificial surface underneath the material being cut.
Apply firm, even pressure. Do not force the blade.
For thicker materials, make multiple shallow passes rather than one deep cut.

Opretholdelse

Udskiftning af knive

Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.

Sørg for, at bladet er helt trukket tilbage.
Locate and press the blade release mechanism.
Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
Release the blade release mechanism and verify the new blade is secure.

Rengøring og opbevaring

Keep your knife clean and dry to ensure longevity and proper function.

Wipe the knife clean with a dry cloth after each use.
Do not immerse the knife in water or cleaning solutions.
Store the knife in a dry place with the blade fully retracted, away from moisture and extreme temperatures.

Fejlfinding

Problem	Mulig årsag	Løsning
Bladet forlænges eller trækkes ikke jævnt ind.	Debris in the blade channel; mechanism obstruction.	Clean the blade channel of any debris. Ensure the blade is not bent or damaged.
Bladet føles løst eller vakkelvornt.	Blade not fully seated; worn blade release mechanism.	Ensure the blade is correctly installed and locked. If the issue persists, the knife may need replacement.
Knife not cutting effectively.	Sløv eller beskadiget blad.	Replace the blade with a new, sharp Uline replacement blade.

Specifikationer

Model: B004SIPL18
Mærke: ULINE
Handle Dimensions (L x H x D): 6 x 1.3 x 0.8 tommer
Blade Dimensions (L x H): 2.4 x 0.74 tommer
Bladtykkelse: 0.6 mm
Håndtag Materiale: Zinc / Rubber
Bladmateriale: Kulstofstål
Håndtagstype: Manuelt udtrækkelig
Varens vægt: 4.8 ounce
Dato først tilgængelig: 17. marts 2011

Garantioplysninger

ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.

Kundesupport

If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:

Webwebsted: www.uline.com
Telefon: Please refer to the ULINE webwebsted for regionale kontaktnumre.

When contacting support, please have your product model number (B004SIPL18) and purchase details ready.

	ULINE H-7162 24" LED-lys - Installations-, sikkerheds- og vedligeholdelsesvejledning Denne vejledning indeholder vigtige oplysninger om ULINE H-7162 24-tommer LED-lys, herunder sikkerhedsadvarsler, monteringsvejledning, elektriske specifikationer og vedligeholdelsesprocedurer. Sørg for sikker og korrekt drift ved at følge disse retningslinjer.
	ULINE H-8520 værktøjsvogn med 4 skuffer, monteringsvejledning Omfattende samlevejledning til ULINE H-8520 værktøjsvogn med 4 skuffer, med detaljerede oplysninger om dele, værktøj, sikkerhedsforanstaltninger og trinvise samleinstruktioner.
	Sikkerhedsdatablad for ULINE AFFEDTNINGSMIDDEL Omfattende sikkerhedsdatablad (SDS) for ULINE AFFEDTNINGSMIDDEL, med detaljer om fareidentifikation, sammensætning, førstehjælpsforanstaltninger, håndtering, opbevaring, eksponeringskontrol, fysiske og kemiske egenskaber, toksikologiske og økologiske oplysninger, transport og lovgivningsmæssige data.
	ULINE H-8041 Kompakt Auto Gulvskrubber Brugermanual og Fejlfindingsvejledning Omfattende brugermanual til ULINE H-8041 Compact Auto Floor Scrubber, der dækker sikkerhed, montering, betjening, daglig vedligeholdelse og fejlfinding for effektiv gulvrengøring.
	ULINE H-2307 Dispenser til træningsklude: Installations- og brugervejledning Detaljeret installations- og brugervejledning til ULINE H-2307 dispenser til træningsklude. Lær, hvordan du monterer, justerer indstillinger og isætter tørre klude eller træningsklude. Inkluderer liste over dele og nødvendige værktøjer.
	ULINE H-7121, H-7122 Industriel ledningsspole - Installations- og vedligeholdelsesmanual Denne manual indeholder detaljerede instruktioner til installation, betjening og vedligeholdelse af ULINE H-7121 og H-7122 industrielle ledningsspoler. Den indeholder sikkerhedsforanstaltninger, dimensioner, monteringsinstruktioner, fejlfindingsvejledning og procedurer for udskiftning af nøglekomponenter som udgangsledningen, indgangsledningen, børsteholderen/børsterne og opsamlerenheden.

ULINE B004SIPL18