DIG PRV075 Justerbar dryptrykregulator Brugermanual

Produkt overview

The DIG PRV075 is a pipe thread adjustable pressure regulator designed to reduce and regulate incoming water pressure for drip irrigation and micro-sprinkler systems. It ensures the system operates within the appropriate pressure range, typically between 28 PSI and 60 PSI, providing consistent outlet pressure regardless of upstream fluctuations.

Billede: Forside view of the DIG PRV075 Adjustable Drip Pressure Regulator, showing its black plastic body and red adjustment cap.

Nøglefunktioner:

Adjustable pressure range with a single screw for fine-tuning.
Rolling diaphragm design prevents debris from entering the spring assembly, ensuring longevity.
Maintains reliable control of outlet pressure despite variations in incoming pressure or flow.
Equipped with 3/4" female pipe thread (FPT) inlet and outlet for compatibility with standard connections.

Opsætning og installation

Proper installation is crucial for the optimal performance of your DIG PRV075 pressure regulator. Follow these steps carefully:

Identificér forbindelsespunkter: The PRV075 has 3/4" female pipe threads on both the inlet and outlet. Ensure your irrigation system components have compatible male pipe threads.
Forbered forbindelsen: Turn off the main water supply to the irrigation line where the regulator will be installed.
Thread the Regulator:
- Apply thread sealant tape (Teflon tape) or pipe dope to the male threads of your water source connection.
- Carefully thread the inlet side of the PRV075 onto the prepared male thread. Hand-tighten first, then use a wrench for an additional 1 to 2 turns until snug. Do not overtighten.
- Repeat the process for the outlet side, connecting it to your drip irrigation or micro-sprinkler system.
Tjek for lækager: Slowly turn on the main water supply and inspect all connections for leaks. Tighten any leaking connections gently.

DIG PRV075 Pressure Regulator with dimensions

Billede: Side view of the DIG PRV075 Pressure Regulator held in a hand, illustrating its compact size and showing approximate dimensions of 5.1 inches (12 cm) in length.

Betjeningsvejledning

The DIG PRV075 is designed for easy pressure adjustment. Follow these steps to set the desired operating pressure:

Find justeringsskruen: The pressure adjustment screw is located under the red cap at one end of the regulator. Gently pry off the red cap to expose the screw.
Juster tryk:
- Use a flathead screwdriver to turn the adjustment screw.
- Turning the screw med uret vilje øge the outlet pressure.
- Turning the screw mod uret vilje formindske the outlet pressure.
- Make small adjustments and observe the system's performance. For precise adjustment, use a pressure gauge downstream of the regulator.
Driftsområde: The regulator is designed to operate within a range of 28 PSI to 60 PSI. Do not attempt to adjust outside this range.
Udskift hætten: Once the desired pressure is set, securely replace the red protective cap.

Opretholdelse

The DIG PRV075 is designed for minimal maintenance. However, periodic checks can ensure its long-term performance:

Undersøg for utætheder: Periodically check all connections for any signs of water leaks. Address any leaks promptly by tightening connections or replacing thread sealant.
Tjek for affald: While the rolling diaphragm helps prevent debris, if you notice inconsistent pressure or reduced flow, it may indicate debris accumulation. Turn off the water, disconnect the regulator, and inspect the inlet and outlet for any blockages. Clean gently with water if necessary.
Vinterisering: In regions subject to freezing temperatures, it is recommended to drain the irrigation system, including the pressure regulator, to prevent damage from freezing water.

Fejlfinding

Problem	Mulig årsag	Løsning
Ingen vandgennemstrømning eller meget lav vandgennemstrømning	Main water supply off Regulator clogged with debris Incorrect installation (e.g., backward)	Sørg for, at hovedvandforsyningen er tændt. Disconnect and inspect regulator for blockages; clean if necessary. Verify regulator is installed with correct flow direction.
Pressure too high or too low (and cannot be adjusted)	Adjustment screw stuck or damaged Internal diaphragm issue Incoming pressure outside regulator's operational range	Attempt to free adjustment screw gently. If internal components are damaged, replacement may be necessary. Ensure incoming pressure is within 28-60 PSI.
Vandlækage fra tilslutninger	Løse forbindelser Utilstrækkelig gevindtætning Beskadigede gevind	Spænd forbindelserne. Reapply thread sealant tape or pipe dope. Inspect threads for damage; replace component if threads are stripped.

Specifikationer

Model: PRV075
Mærke: DIG
Materiale: Plastic body, Stainless Steel exterior finish (referring to internal spring/components)
Indgangs-/udgangsforbindelse: 3/4" Female Pipe Thread (FPT)
Justerbart trykområde: 28 PSI til 60 PSI
Dimensioner (L x B x H): Cirka 4 x 2 x 3 tommer
Varens vægt: Cirka 1.6 ounce
Antal porte: 2
Ventiltype: Globe Valve (as per specification, though it's a regulator)
UPC: 013158333333

Garanti og support

For information regarding product warranty, technical support, or replacement parts, please contact DIG customer service directly. Refer to the official DIG webwebstedet eller produktemballagen for at få de seneste kontaktoplysninger og garantivilkår.

You can visit the official DIG store for more information: DIG Official Store

	DIG drypvandingsguide: Kom i gang med vandfornuftig drypvanding Lær hvordan du opsætter og bruger et vandeffektivt drypvandingssystem med DIG Drip Irrigation Guide. Denne guide dækker systemkomponenter, installation og avancerede løsninger.tagdrypvanding for et sundt og smukt landskab.
	DIG drypvandingssystemer: Vandbesparende guide til haver og landskaber Omfattende guide til DIG's vandeffektive drypvandingsprodukter, der dækker systemplanlægning, installation, dryppere, mikrosprinklere og vedligeholdelse for sundere haver og landskaber.
	DIG Vandingsproduktkatalog 2016 - Effektive og bæredygtige løsninger Udforsk DIG's produktkatalog for kunstvanding 2016, der indeholder et bredt udvalg af drypledninger, udledere, sprinklere, filtre, controllere og tilbehør af høj kvalitet til professionel landskabsvanding. Opdag innovative vandhåndteringsløsninger fra DIG.
	Installationsvejledning til DIG ST100AS dryp- og iblødsætningssystem til grøntsagsvanding Installationsvejledning og vejledning til DIG ST100AS dryp- og soaker-vandingssystem til grøntsager. Lær, hvordan du opsætter, designer layouts og administrerer vandingsplaner for effektiv vanding af køkkenhaven.
	DIG G77AS Installationsvejledning til landskabsdrypvandingssystem Omfattende installationsvejledning og vejledning til DIG G77AS drypvandingssystem til landskaber, inklusive komponentlister, opsætningstrin, vandingsplaner og specifikationer.
	DIG drypvandingsguide: Vandkloge drypvandingssystemer Udforsk DIG's drypvandingsguide for vandbesparende løsninger. Lær om fordelene ved drypvanding, komponenter, systemdesign, installation, planlægning og vedligeholdelse for effektiv vanding.

DIG PRV075