Ideal Lux TRONCO PT1 H60 udendørs gulvlampe Lamp Instruktionsmanual

Indledning

This manual provides essential instructions for the safe installation, operation, and maintenance of your Ideal Lux TRONCO PT1 H60 outdoor floor lampLæs venligst denne manual grundigt inden installation, og gem den til senere brug.

Produktbeskrivelse: The TRONCO PT1 H60 is an outdoor pole bollard lamp featuring a varnished die-cast aluminum body and a Pyrex glass diffuser with internal aluminum elements. It is designed for use with an E27 LED or halogen bulb (not included).

Sikkerhedsoplysninger

• Sørg for, at strømforsyningen er afbrudt før installation, vedligeholdelse eller udskiftning af pære.
• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter.
• Overskrid ikke det maksimale wattage specified (max 1 x 60W E27).
• This product is designed for outdoor use. Ensure all connections are waterproofed appropriately.
• Dæk ikke lamp with insulating material.
• Hvis dette armaturs eksterne fleksible kabel eller ledning er beskadiget, skal det udelukkende udskiftes af producenten eller dennes serviceagent eller en lignende kvalificeret person for at undgå en fare.

Pakkens indhold

• TRONCO PT1 H60 Lamp Armatur
• Monteringsudstyr (skruer, ankre)
• Instruktionsmanual (dette dokument)

Note: Light bulb (E27) is not included and must be purchased separately.

Opsætning og installation

1. Forberedelse:

   Before beginning installation, ensure the main power supply is switched off at the circuit breaker. Gather all necessary tools (screwdriver, wire strippers, drill, etc.).
2. Monteringssted:

   Select a suitable outdoor location for the lamp. The base of the lamp should be mounted on a stable, level surface, such as concrete or a sturdy deck. Ensure adequate drainage if installing in soil.

   

   Image: The Ideal Lux TRONCO PT1 H60 floor lamp, showing its black cylindrical body and clear glass diffuser. This image illustrates the overall appearance of the lamp før installation.

3. Base installation:

   Placer lamp base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes if necessary, then secure the lamp base using the provided mounting hardware. Ensure the base is firmly attached.

   

   Image: Technical drawing showing the dimensions of the TRONCO PT1 H60 lamp. The height is 605mm and the diameter is 155mm. This diagram is crucial for planning the installation space.

4. Ledningsføring:

   Route the electrical cable to the lamp's wiring compartment. Connect the live, neutral, and earth wires according to local electrical codes. Ensure all connections are secure and properly insulated, especially for outdoor use. Use appropriate waterproof connectors if required.

5. Installation af pære:

   Unscrew the diffuser to access the lampholder. Carefully screw an E27 LED or halogen bulb (max 60W) into the lampholder. Do not overtighten. Replace the diffuser, ensuring it is securely fastened to maintain weather resistance.
6. Endelig kontrol:

   Dobbelttjek alle forbindelser og sørg for, at de er korrekte.amp is securely mounted. Restore power at the circuit breaker and test the lamp's funktionalitet.

Betjeningsvejledning

The Ideal Lux TRONCO PT1 H60 lamp operates by connecting it to a standard electrical supply. Once installed and powered, the lamp will illuminate when the connected switch is activated.

• Tænd/sluk: Styr lamp using the external switch connected to its power supply.
• Pære type: Use only E27 base bulbs. LED bulbs are recommended for energy efficiency and longer lifespan.
• Wattage: Do not exceed 60W for the E27 bulb.

Opretholdelse

Regular maintenance ensures the longevity and optimal performance of your TRONCO PT1 H60 lamp.

• Rensning:

  Disconnect power before cleaning. Wipe the aluminum body with a soft, damp cloth. Clean the Pyrex glass diffuser with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Udskiftning af pære:

  Ensure power is off. Unscrew the diffuser. Carefully remove the old E27 bulb and replace it with a new one (max 60W E27). Reattach the diffuser securely.

• Inspektion:

  Efterse lamp for any signs of damage, loose connections, or wear on the wiring. If any damage is found, disconnect power and consult a qualified electrician for repair.

Fejlfinding

If problems persist after attempting these solutions, please contact a qualified electrician or Ideal Lux customer support.

Specifikationer

• Model: TRONCO PT1 H60 (004730)
• Mærke: Ideel Lux
• Type: Udendørs etage Lamp / Pole Bollard
• Materiale: Varnished Die-cast Aluminum body, Pyrex Glass diffuser
• Farve: Sort
• Dimensioner: Ø 155 mm x H 605 mm (Diameter 15.5 cm x Height 60.5 cm)
• Vægt: Cirka 998 g
• Lampholder: E27
• Max Wattage: 1 x 60W (E27)
• Input bindtage: 100-240 V
• Pære type: LED or Halogen (E27, not included)

Garanti og support

For warranty information and customer support, please refer to the official Ideal Lux webwebstedet eller kontakt din forhandler. Gem din købskvittering som købsbevis.

Fabrikant: Ideal-lux

Kontakte: Refer to Ideal Lux official channels for support.