Indledning
This manual provides essential information for the safe and efficient operation of your Telwin 807026 Battery Charger. This device is designed for charging free electrolyte (WET) batteries with 12V or 24V voltage, featuring protection against overcharging and polarity inversion. Please read this manual thoroughly before use.
Sikkerhedsinstruktioner
ADVARSEL: Læs alle sikkerhedsadvarsler og instruktioner, før du bruger dette produkt. Manglende overholdelse af advarsler og instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.
- Brug kun opladeren i godt ventilerede områder.
- Udsæt ikke opladeren for regn eller våde forhold.
- Disconnect the charger from the mains supply before making or breaking the connections to the battery.
- Ensure correct polarity before connecting to the battery (red clamp til positiv, sort klamp til negativ).
- Opbevares utilgængeligt for børn.
- Oplad ikke ikke-genopladelige batterier.
- Bær øjenværn og beskyttelsestøj, når du arbejder med batterier.
- Undgå kortslutning af ladestikketamps.
Produkt overview
The Telwin 807026 Battery Charger features a robust design with clear indicators for safe and effective battery charging.
Figur 1: Forside view of the Telwin Nevada 15 Battery Charger. The front panel displays the 10A fuse, an ammeter indicating charging current, a voltage selector switch (12V/24V), and printed specifications including input voltage (230V~ 50/60Hz), absorbed power (110W), and charging parameters for 12V and 24V batteries. The charging clamps are visible at the bottom.
Nøglekomponenter omfatter:
- Amperemeter: Displays the charging current.
- Voltage Vælgerkontakt: Allows selection between 12V and 24V charging.
- Sikring (10A): Yder overstrømsbeskyttelse.
- Charging Cables with Clamps: For connecting to the battery terminals.
Opsætning
- Place the charger on a stable, flat surface in a well-ventilated area.
- Ensure the charger is disconnected from the mains power supply.
- Identificer batterivolumentage (12V eller 24V) og indstil lydstyrkentage selector switch on the charger accordingly.
- Tilslut den røde (+) opladningsklemmeamp til den positive (+) pol på batteriet.
- Tilslut den sorte (-) opladningskabelamp til den negative (-) pol på batteriet.
- Sørg for, at alle forbindelser er sikre, før du fortsætter.
Betjeningsvejledning
Follow these steps to charge your battery:
- Efter tilslutning af clamps to the battery (as per Setup), plug the charger's power cord into a suitable 230V AC power outlet.
- The ammeter will indicate the charging current. The needle will gradually decrease as the battery charges.
- Monitor the ammeter. When the needle approaches zero, the battery is nearing full charge.
- Once charging is complete, first disconnect the charger from the mains power supply.
- Frakobl derefter den sorte (-) kabelamp fra batteriet, efterfulgt af den røde (+) kl.amp.
- Store the charger in a dry, safe place.
Opladning af 12V batterier
For 12V batteries, ensure the voltage selector is set to 12V. The charger provides 6A arithmetic charging current, suitable for batteries with a minimum capacity of 60Ah.
Opladning af 24V batterier
For 24V batteries, ensure the voltage selector is set to 24V. The charger provides 3A arithmetic charging current, suitable for batteries with a minimum capacity of 30Ah.
Opretholdelse
- Hold opladeren ren og fri for støv og snavs.
- Regularly check the charging cables and clampKontroller for tegn på skader. Udskift om nødvendigt.
- Opbevar opladeren på et køligt, tørt sted, når den ikke er i brug.
- Do not attempt to open or repair the charger yourself. Refer to qualified service personnel.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren tænder ikke | No power from outlet; Blown fuse; Loose connection. | Check power outlet; Replace 10A fuse; Ensure secure connections. |
| Ammeter not showing current | Incorrect polarity; Battery fully charged; Battery severely discharged/faulty. | Tjek klamp connections (+ to +, - to -); Battery may be full; Test battery condition. |
| Overophedning | Poor ventilation; Overloaded. | Ensure adequate airflow around charger; Check battery capacity matches charger's capabilities. |
Kontakt kundesupport, hvis problemet fortsætter.
Specifikationer
- Model: Telwin 807026 (Nevada 15)
- Input bindtage: 230V ~ 50/60Hz (220V-240V)
- Absorberet kraft: 110W
- Opladning Voltage: 12V / 24V
- Charging Current (Arithmetic): 12V - 6A, 24V - 3A
- Minimum Battery Capacity: 12V - 60Ah, 24V - 30Ah
- Maksimal batterikapacitet: 115 Ah
- Sikring: 10A
- Beskyttelse: Overload and polarity inversion protection, Semi-automatic thermal protection
- Vægt: 2600 gram
- Farve: Rød
- Strømkildetype: AC
Garanti og support
For warranty information or technical support, please contact your retailer or visit the official Telwin webwebstedet. Behold din købskvittering som købsbevis.
Fabrikant: Telwin SpA
Modelnummer: 807026
